码迷,mamicode.com
首页 > 其他好文 > 详细

Exercise : Self-Taught Learning

时间:2014-09-16 17:20:10      阅读:557      评论:0      收藏:0      [点我收藏+]

标签:des   style   blog   http   color   io   os   ar   strong   

First, you will train your sparse autoencoder on an "unlabeled" training dataset of handwritten digits. This produces feature that are penstroke-like. We then extract these learned features from a labeled dataset of handwritten digits. These features will then be used as inputs to the softmax classifier that you wrote in the previous exercise.

Concretely, for each example in the the labeled training dataset bubuko.com,布布扣, we forward propagate the example to obtain the activation of the hidden units bubuko.com,布布扣. We now represent this example using bubuko.com,布布扣 (the "replacement" representation), and use this to as the new feature representation with which to train the softmax classifier.

Finally, we also extract the same features from the test data to obtain predictions.

In this exercise, our goal is to distinguish between the digits from 0 to 4. We will use the digits 5 to 9 as our "unlabeled" dataset with which to learn the features; we will then use a labeled dataset with the digits 0 to 4 with which to train the softmax classifier.

 

Step 1: Generate the input and test data sets
Step 2: Train the sparse autoencoder

 

use the unlabeled data (the digits from 5 to 9) to train a sparse autoencoder

When training is complete, you should get a visualization of pen strokes like the image shown below:

bubuko.com,布布扣

Informally, the features learned by the sparse autoencoder should correspond to penstrokes.

 

Step 3: Extracting features

 

After the sparse autoencoder is trained, you will use it to extract features from the handwritten digit images.

Step 4: Training and testing the logistic regression model

Use your code from the softmax exercise (softmaxTrain.m) to train a softmax classifier using the training set features (trainFeatures) and labels (trainLabels).

Step 5: Classifying on the test set

Finally, complete the code to make predictions on the test set (testFeatures) and see how your learned features perform! If you‘ve done all the steps correctly, you should get an accuracy of about 98% percent.

code

%% CS294A/CS294W Self-taught Learning Exercise

%  Instructions
%  ------------
% 
%  This file contains code that helps you get started on the
%  self-taught learning. You will need to complete code in feedForwardAutoencoder.m
%  You will also need to have implemented sparseAutoencoderCost.m and 
%  softmaxCost.m from previous exercises.
%
%% ======================================================================
%  STEP 0: Here we provide the relevant parameters values that will
%  allow your sparse autoencoder to get good filters; you do not need to 
%  change the parameters below.

inputSize  = 28 * 28;
numLabels  = 5;
hiddenSize = 200;
sparsityParam = 0.1; % desired average activation of the hidden units.
                     % (This was denoted by the Greek alphabet rho, which looks like a lower-case "p",
                     %  in the lecture notes). 
lambda = 3e-3;       % weight decay parameter       
beta = 3;            % weight of sparsity penalty term   
maxIter = 400;

%% ======================================================================
%  STEP 1: Load data from the MNIST database
%
%  This loads our training and test data from the MNIST database files.
%  We have sorted the data for you in this so that you will not have to
%  change it.

% Load MNIST database files
mnistData   = loadMNISTImages(train-images.idx3-ubyte);
mnistLabels = loadMNISTLabels(train-labels.idx1-ubyte);

% Set Unlabeled Set (All Images)

% Simulate a Labeled and Unlabeled set
labeledSet   = find(mnistLabels >= 0 & mnistLabels <= 4);
unlabeledSet = find(mnistLabels >= 5);

%%增加的一行代码
unlabeledSet = unlabeledSet(1:end/3);

numTest = round(numel(labeledSet)/2);%拿一半的样本来训练%
numTrain = round(numel(labeledSet)/3);
trainSet = labeledSet(1:numTrain);
testSet  = labeledSet(numTrain+1:2*numTrain);

unlabeledData = mnistData(:, unlabeledSet);%%为什么这两句连在一起都要出错呢?
% pack;
trainData   = mnistData(:, trainSet);
trainLabels = mnistLabels(trainSet) + 1; % Shift Labels to the Range 1-5

% mnistData2 = mnistData;
testData   = mnistData(:, testSet);
testLabels = mnistLabels(testSet) + 1;   % Shift Labels to the Range 1-5

% Output Some Statistics
fprintf(# examples in unlabeled set: %d\n, size(unlabeledData, 2));
fprintf(# examples in supervised training set: %d\n\n, size(trainData, 2));
fprintf(# examples in supervised testing set: %d\n\n, size(testData, 2));

%% ======================================================================
%  STEP 2: Train the sparse autoencoder
%  This trains the sparse autoencoder on the unlabeled training
%  images. 

%  Randomly initialize the parameters
theta = initializeParameters(hiddenSize, inputSize);

%% ----------------- YOUR CODE HERE ----------------------
%  Find opttheta by running the sparse autoencoder on
%  unlabeledTrainingImages

opttheta = theta; 
addpath minFunc/
options.Method = lbfgs;
options.maxIter = 400;
options.display = on;
[opttheta, loss] = minFunc( @(p) sparseAutoencoderLoss(p, ...
      inputSize, hiddenSize, ...
      lambda, sparsityParam, ...
      beta, unlabeledData), ...
      theta, options);


%% -----------------------------------------------------
                          
% Visualize weights
W1 = reshape(opttheta(1:hiddenSize * inputSize), hiddenSize, inputSize);
display_network(W1);

%%======================================================================
%% STEP 3: Extract Features from the Supervised Dataset
%  
%  You need to complete the code in feedForwardAutoencoder.m so that the 
%  following command will extract features from the data.

trainFeatures = feedForwardAutoencoder(opttheta, hiddenSize, inputSize, ...
                                       trainData);

testFeatures = feedForwardAutoencoder(opttheta, hiddenSize, inputSize, ...
                                       testData);

%%======================================================================
%% STEP 4: Train the softmax classifier

softmaxModel = struct;  
%% ----------------- YOUR CODE HERE ----------------------
%  Use softmaxTrain.m from the previous exercise to train a multi-class
%  classifier. 

%  Use lambda = 1e-4 for the weight regularization for softmax
lambda = 1e-4;
inputSize = hiddenSize;
numClasses = numel(unique(trainLabels));%unique为找出向量中的非重复元素并进行排序

% You need to compute softmaxModel using softmaxTrain on trainFeatures and
% trainLabels


% You need to compute softmaxModel using softmaxTrain on trainFeatures and
% trainLabels

options.maxIter = 100;
softmaxModel = softmaxTrain(inputSize, numClasses, lambda, ...
                            trainFeatures, trainLabels, options);



%% -----------------------------------------------------


%%======================================================================
%% STEP 5: Testing 

%% ----------------- YOUR CODE HERE ----------------------
% Compute Predictions on the test set (testFeatures) using softmaxPredict
% and softmaxModel


[pred] = softmaxPredict(softmaxModel, testFeatures);


%% -----------------------------------------------------

% Classification Score
fprintf(Test Accuracy: %f%%\n, 100*mean(pred(:) == testLabels(:)));

% (note that we shift the labels by 1, so that digit 0 now corresponds to
%  label 1)
%
% Accuracy is the proportion of correctly classified images
% The results for our implementation was:
%
% Accuracy: 98.3%
%
%

 

function [activation] = feedForwardAutoencoder(theta, hiddenSize, visibleSize, data)

% theta: trained weights from the autoencoder
% visibleSize: the number of input units (probably 64) 
% hiddenSize: the number of hidden units (probably 25) 
% data: Our matrix containing the training data as columns.  So, data(:,i) is the i-th training example. 
  
% We first convert theta to the (W1, W2, b1, b2) matrix/vector format, so that this 
% follows the notation convention of the lecture notes. 

W1 = reshape(theta(1:hiddenSize*visibleSize), hiddenSize, visibleSize);
b1 = theta(2*hiddenSize*visibleSize+1:2*hiddenSize*visibleSize+hiddenSize);

%% ---------- YOUR CODE HERE --------------------------------------
%  Instructions: Compute the activation of the hidden layer for the Sparse Autoencoder.
activation  = sigmoid(W1*data+repmat(b1,[1,size(data,2)]));

%-------------------------------------------------------------------

end

%-------------------------------------------------------------------
% Heres an implementation of the sigmoid function, which you may find useful
% in your computation of the costs and the gradients.  This inputs a (row or
% column) vector (say (z1, z2, z3)) and returns (f(z1), f(z2), f(z3)). 

function sigm = sigmoid(x)
    sigm = 1 ./ (1 + exp(-x));
end

Exercise : Self-Taught Learning

标签:des   style   blog   http   color   io   os   ar   strong   

原文地址:http://www.cnblogs.com/sprint1989/p/3975312.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!