码迷,mamicode.com
首页 > 其他好文 > 详细

usb device address error 110

时间:2017-12-27 14:23:13      阅读:156      评论:0      收藏:0      [点我收藏+]

标签:min   app   why   bsp   who   rip   system   ons   into   

ubuntu失灵了,怎么都起不来,报一堆错误usb device descriptor read/64, error 110......重启,换kvm的接口,usb键盘鼠标。。。终于在试了下面这个方法之后,Ubuntu成功的启动登陆进入正常轨道。特转载整篇文章留作纪念:
 

 

If Linux suddenly happen to fail to recognize a USB drive, check dmesg for errors. Once you see a bunch of errors like

usb 1-5: device descriptor read/64, error -32  
usb 1-5: new high speed USB device using ehci_hcd and address 21  
usb 1-5: device not accepting address 21, error -32

most probably it’s a result of hardware failure rather than a driver or kernel bug. USB has an over-current protection, which gets triggered when power consumption from the port is too high.

Unplug all USB devices from PC, turn power off, and wait a minute or two. Plug everything back and boot into Linux.

I spent the whole morning, until found out why. I hope that this message will save someone a few hours, and nerves.

PS: Actual errors may vary. You may see different port and/or error code. Ex.:

usb 3-1: device descriptor read/64, error -62

or

usb 4-2: device descriptor read/64, error -71

or

usb 2-3: device descriptor read/64, error -101

but the root of the problem is the same.

原文见链接:http://paulphilippov.com/articles/how-to-fix-device-not-accepting-address-error

usb device address error 110

标签:min   app   why   bsp   who   rip   system   ons   into   

原文地址:https://www.cnblogs.com/zxc2man/p/8125035.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!