标签：check current 全局 计划 基本 oca register 情况 ima
mycat实验之主从配置读写分离和分表 架构图： 1.实验环境： vmware虚机3个 （虚机太少了，电脑有点吃力，3个虚机只能达到基本的测试） 系统centos7 （实验是关闭防火墙和selinux做的） mysql版本5.7 mycat版本1.6 虚机名字和ip： mysql1 192.168.211.138 mysql2 192.168.211.139 mysql3 192.168.211.142 mycat安装在mysql1(192.168.211.138) 这台主机须能够解析mysql2,mysql3的地址。 可通过/etc/hosts 手动添加解析 2.实验目的 实现mycat读写分离和分表的功能。 3.实验思路 在mycat创建一个逻辑库：hello。 创建四个表格： t1 这个表格用来分片，用枚举的规则分片。 t2 这个表格做全局表。 t3 这个表格做普通表，定义它放到其中一个datanode,放到mysql1 t4 这个表格做普通表，定义它放到其中一个datanode,放到mysql3 虚机的分配： mysql1 和mysql2做主从配置，其中mysql1为主，mysql2为从,其中mysql1用来写，mysql2用来读。 mysql3 就是个单独的datanode 实际我们只有两个datanode，mysql1,mysql3。 4.实验步骤 分别在虚机安装mysql5.7，步骤略。 设置mysql用户，步骤略。请注意，必须设置一个用户允许内网地址连接或者干脆是允许任何地方连接。比如设置'root'@'%'。 安装mycat。步骤略。 配置mysql1和mysql2主从，步骤略。 以上都是些常用配置，懒得特意记录了。 以上的环境都配置好了，就可以开始我们实验核心步骤mycat的配置了 现在开始整个过程的配置。 1.在mysql1（192.168.211.138）里创建一个db1. mysql> create database db1; Query OK, 1 row affected (0.01 sec) 检查mysql2（192.168.211.139）里是不是同步了？ mysql> show databases; +--------------------+ | Database | +--------------------+ | information_schema | | db1 | | logs | | mysql | | performance_schema | | sys | | wordpress | +--------------------+ 7 rows in set (0.00 sec) 同步了。 2.在mysql3（192.168.211.142）里创建db2。 mysql> show databases; +--------------------+ | Database | +--------------------+ | information_schema | | db2 | | logs | | mysql | | performance_schema | | sys | | wordpress | +--------------------+ 7 rows in set (0.01 sec) 3.在mysql1里配置mycat，我的mycat安装在mysql1。 我的配置文件路径： [root@mysql1 conf]# pwd /usr/local/mycat/conf 主要配置文件有： [root@mysql1 conf]# ls autopartition-long.txt log4j2.xml schema.xml.bk server.xml.bk auto-sharding-long.txt migrateTables.properties schema.xml.bk2 sharding-by-enum.txt auto-sharding-rang-mod.txt myid.properties sequence_conf.properties wrapper.conf cacheservice.properties partition-hash-int.txt sequence_db_conf.properties zkconf dnindex.properties partition-range-mod.txt sequence_distributed_conf.properties zkdownload ehcache.xml rule.xml sequence_time_conf.properties index_to_charset.properties schema.xml server.xml [root@mysql1 conf]# 需要用到的是:schema.xml ##这个文件配置分表读写分离策略 rule.xml ##这是分表规则的定义 server.xml ##登录mycat的账户密码和防火墙的设置 4.首先配置：schema.xml 备份下原配置文件： [root@mysql1 conf]# cp schema.xml schema.xml.bk3 清空配置文件： [root@mysql1 conf]# echo " " >schema.xml 重新配置schema.xml，如下是我的配置文件整个内容: <?xml version="1.0"?> <!DOCTYPE mycat:schema SYSTEM "schema.dtd"> <mycat:schema xmlns:mycat="http://io.mycat/"> <schema name="hello" checkSQLschema="false" sqlMaxLimit="100"> <!-- auto sharding by id (long) --> <table name="t1" dataNode="dn1,dn2" rule="sharding-by-intfile" /> <!-- global table is auto cloned to all defined data nodes ,so can join with any table whose sharding node is in the same data node --> <table name="t2" primaryKey="ID" type="global" dataNode="dn1,dn2" /> <table name="t3" dataNode="dn1" /> <table name="t4" dataNode="dn2" /> </schema> <!-- <dataNode name="dn1$0-743" dataHost="localhost1" database="db$0-743" /> --> <dataNode name="dn1" dataHost="mysql1" database="db1" /> <dataNode name="dn2" dataHost="mysql3" database="db2" /> <dataHost name="mysql1" maxCon="1000" minCon="10" balance="3" writeType="0" dbType="mysql" dbDriver="native" switchType="1" slaveThreshold="100"> <heartbeat>select user()</heartbeat> <!-- can have multi write hosts --> <writeHost host="hostM1" url="192.168.211.138:3306" user="root" password="Alex2010@"> <!-- can have multi read hosts --> <readHost host="hostS2" url="192.168.211.139:3306" user="root" password="Alex2010@"/> </writeHost> </dataHost> <dataHost name="mysql3" maxCon="1000" minCon="10" balance="0" writeType="0" dbType="mysql" dbDriver="native" switchType="1" slaveThreshold="100"> <heartbeat>select user()</heartbeat> <!-- can have multi write hosts --> <writeHost host="hostM1" url="192.168.211.142:3306" user="root" password="Alex2010@"> <!-- can have multi read hosts --> <readHost host="hostS2" url="192.168.211.142:3306" user="root" password="Alex2010@"/> </writeHost> </dataHost> </mycat:schema> 这些字段的解释，可以查看我前面分片规则里面的解析。 说明下datahost balance字段的意义 balance属性 负载均衡类型，目前的取值有3种： 1. balance="0", 不开启读写分离机制，所有读操作都发送到当前可用的writeHost上。 2. balance="1"，全部的readHost与stand by writeHost参与select语句的负载均衡，简单的说，当双主双从模式(M1->S1，M2->S2，并且M1与 M2互为主备)，正常情况下，M2,S1,S2都参与select语句的负载均衡。 3. balance="2"，所有读操作都随机的在writeHost、readhost上分发。 4. balance="3"，所有读请求随机的分发到wiriterHost对应的readhost执行，writerHost不负担读压 writeType属性 负载均衡类型，目前的取值有3种： 1. writeType="0", 所有写操作发送到配置的第一个writeHost，第一个挂了切到还生存的第二个writeHost，重新启动后已切换后的为准， 切换记录在配置文件中:dnindex.properties . 2. writeType="1"，所有写操作都随机的发送到配置的writeHost，1.5以后废弃不推荐。 需要说明的是： <dataHost name="mysql1" maxCon="1000" minCon="10" balance="3" writeType="0" dbType="mysql" dbDriver="native" switchType="1" slaveThreshold="100"> <heartbeat>select user()</heartbeat> <!-- can have multi write hosts --> <writeHost host="hostM1" url="192.168.211.138:3306" user="root" password="Alex2010@"> <!-- can have multi read hosts --> <readHost host="hostS2" url="192.168.211.139:3306" user="root" password="Alex2010@"/> </writeHost> </dataHost> 读写分离这里有两种写法： 除了上面的还可以写下面这样： <dataHost name="mysql1" maxCon="1000" minCon="10" balance="3" writeType="0" dbType="mysql" dbDriver="native" switchType="1" slaveThreshold="100"> <heartbeat>select user()</heartbeat> <!-- can have multi write hosts --> <writeHost host="hostM1" url="192.168.211.138:3306" user="root" password="Alex2010@"> </writeHost> <writeHost host="hostM1" url="192.168.211.139:3306" user="root" password="Alex2010@"> </writeHost> </dataHost> 区别是上面的那种写法，如果主服务器挂了，从服务器不能读了。 下面的这种写法，主服务器挂了，从服务器依然可以正常读取。 这里说一下，后面会做测试。 5.看看rule.xml里的配置 看分表t1的设置：<table name="t1" dataNode="dn1,dn2" rule="sharding-by-intfile" /> 分表规则是 sharding-by-intfile 看看这个的规则设置 <tableRule name="sharding-by-intfile"> <rule> <columns>city</columns> <algorithm>hash-int</algorithm> </rule> </tableRule> 为什么columns是city呢？ 这个city是我设定的，计划创建表格t1(id,name,bu,city)有这四个列。我准备用city来做分片的列。 继续往下看 </function> <function name="hash-int" class="io.mycat.route.function.PartitionByFileMap"> <property name="mapFile">partition-hash-int.txt</property> <property name="type">1</property> <property name="defaultNode">0</property> </function> 这是用的hash-int函数的设置了。其中mpfile是指要读取的配置文件。这是什么意思呢？ 看看partition-hash-int.txt的内容 [root@mysql1 conf]# cat partition-hash-int.txt #10000=0 #10010=1 bj=0 gz=0 sz=1 [root@mysql1 conf]# 我计划的表格t1 city列有三个值，bj gz sz ，这个设置的意思是：bj gz 的数据存储到datanode1也就是mysql1，sz的数据存储 到datanode2也就是mysql3。 <property name="type">1</property> <property name="defaultNode">0</property> 这两条参数也必须要有，type默认的值是0，而0的格式是interger，注意我们分片的列是city是字符。 6.配置server.xml，参考下官方教程，很简单。 7.到这里可以来启动mycat，登录进去创建表格，插入数据测试，是不是能够达到我们的预期目标？ [root@mysql1 conf]# mysql -uroot -p123456 -P8066 -h 127.0.0.1 mysql: [Warning] Using a password on the command line interface can be insecure. Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 2 Server version: 5.6.29-mycat-1.6-RELEASE-20161028204710 MyCat Server (OpenCloundDB) Copyright (c) 2000, 2017, Oracle and/or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners. Type 'help;' or '\h' for help. Type '\c' to clear the current input statement. mysql> 登录进来了 mysql> show databases; +----------+ | DATABASE | +----------+ | hello | +----------+ 1 row in set (0.02 sec) mysql> 我们设置的逻辑库hello mysql> use hello; Reading table information for completion of table and column names You can turn off this feature to get a quicker startup with -A Database changed mysql> show tables; +-----------------+ | Tables in hello | +-----------------+ | t1 | | t2 | | t3 | | t4 | +-----------------+ 4 rows in set (0.01 sec) mysql> mysql> desc t1; ERROR 1146 (42S02): Table 'db1.t1' doesn't exist mysql> 注意这里有个问题，这些t1-t4的表格，看似是有，其实是假的。感觉像是BUG。表格需要我们手动创建。 创建表格： mysql> create table t1 (id int not null,name varchar(15) not null,bu varchar(10) not null,city varchar(5) not null); Query OK, 0 rows affected (0.36 sec) mysql> create table t2 (id int not null,name varchar(15) not null); Query OK, 0 rows affected (0.10 sec) mysql> create table t3 (id int not null,gongzi int not null); Query OK, 0 rows affected (0.07 sec) mysql> create table t4 (id int not null,shui int not null); Query OK, 0 rows affected (0.07 sec) 看看创建的表格都放在哪? mysql> explain create table t1 (id int not null,name varchar(15) not null,bu varchar(10) not null,city varchar(5) not null); +-----------+--------------------------------------------------------------------------------------------------------------+ | DATA_NODE | SQL | +-----------+--------------------------------------------------------------------------------------------------------------+ | dn1 | create table t1 (id int not null,name varchar(15) not null,bu varchar(10) not null,city varchar(5) not null) | | dn2 | create table t1 (id int not null,name varchar(15) not null,bu varchar(10) not null,city varchar(5) not null) | +-----------+--------------------------------------------------------------------------------------------------------------+ 2 rows in set (0.00 sec) mysql> 这是分片表，dn1,dn2都有 mysql> explain create table t2 (id int not null,name varchar(15) not null); +-----------+-------------------------------------------------------------+ | DATA_NODE | SQL | +-----------+-------------------------------------------------------------+ | dn1 | create table t2 (id int not null,name varchar(15) not null) | | dn2 | create table t2 (id int not null,name varchar(15) not null) | +-----------+-------------------------------------------------------------+ 2 rows in set (0.00 sec) mysql> 这是全局表，dn1,dn2都有，全局表的意思是，每个dn节点都有的表而且数据保持一致。 mysql> explain create table t3 (id int not null,gongzi int not null); +-----------+-------------------------------------------------------+ | DATA_NODE | SQL | +-----------+-------------------------------------------------------+ | dn1 | create table t3 (id int not null,gongzi int not null) | +-----------+-------------------------------------------------------+ 1 row in set (0.00 sec) mysql> 普通表，预设就是放在dn1，正常 mysql> explain create table t4 (id int not null,shui int not null); +-----------+------------------------------------------------------+ | DATA_NODE | SQL | +-----------+------------------------------------------------------+ | dn2 | create table t4 (id int not null,shui int not null) | +-----------+------------------------------------------------------+ 1 row in set (0.00 sec) mysql> 普通表，预设就是放在dn2，正常 看看从库的情况： mysql> show tables; +---------------+ | Tables_in_db1 | +---------------+ | t1 | | t2 | | t3 | +---------------+ 3 rows in set (0.00 sec) mysql> 除了t4没有，其他都有，正常。 插入数据： 插入t1 mysql> insert into t1(id,name,bu,city)values(1,'am1','sy','bj'); Query OK, 1 row affected (0.38 sec) mysql> insert into t1(id,name,bu,city)values(2,'am2','cs','gz'); Query OK, 1 row affected (0.03 sec) mysql> insert into t1(id,name,bu,city)values(3,'am3','net','sz'); Query OK, 1 row affected (0.08 sec) mysql> 插入t2 mysql> insert into t2(id,name)value(4,'am4'),(5,'am5'); Query OK, 2 rows affected (0.11 sec) Records: 2 Duplicates: 0 Warnings: 0 插入t3 mysql> insert into t3(id,gongzi)values(6,1000),(7,1200); Query OK, 2 rows affected (0.02 sec) Records: 2 Duplicates: 0 Warnings: 0 插入t4 mysql> insert into t4(id,shui)values(8,10),(9,8); Query OK, 2 rows affected (0.04 sec) Records: 2 Duplicates: 0 Warnings: 0 基础架构和环境以及达成，现在来测试： 首先，t1根据预设的目的，bj和gz的数据存放在dn1(mysql1),sz的数据存放在dn2(mysql3) mysql> select * from t1 where city='bj' or city='gz'; +----+------+----+------+ | id | name | bu | city | +----+------+----+------+ | 1 | am1 | sy | bj | | 2 | am2 | cs | gz | +----+------+----+------+ 2 rows in set (0.10 sec) mysql> explain select * from t1 where city='bj' or city='gz'; +-----------+--------------------------------------------------------------+ | DATA_NODE | SQL | +-----------+--------------------------------------------------------------+ | dn1 | SELECT * FROM t1 WHERE city = 'bj' OR city = 'gz' LIMIT 100 | +-----------+--------------------------------------------------------------+ 1 row in set (0.00 sec) mysql> mysql> explain select * from t1 where city='sz'; +-----------+----------------------------------------------+ | DATA_NODE | SQL | +-----------+----------------------------------------------+ | dn2 | SELECT * FROM t1 WHERE city = 'sz' LIMIT 100 | +-----------+----------------------------------------------+ 1 row in set (0.02 sec) mysql> 分表正常 测试读写分离 开启debug日志 <asyncRoot level="debug" includeLocation="true"> ##默认level是info 改成debug后，重启mycat服务。 <AppenderRef ref="Console" /> <AppenderRef ref="RollingFile"/> </asyncRoot> 检索数据： 检索t3的数据，t3只有mysql1有。 mysql> select * from t3; +----+--------+ | id | gongzi | +----+--------+ | 6 | 1000 | | 7 | 1200 | +----+--------+ 2 rows in set (0.02 sec) 以下是mycat.log日志，可以看到是从mysql2(192.168.211.139)读取的数据 2017-12-15 01:47:23.280 DEBUG [$_NIOREACTOR-0-RW] (io.mycat.server.NonBlockingSession.releaseConnection(NonBlockingSession.java:341)) - release connection MySQLConnection [id=22, lastTime=1513320443251, user=root, schema=db1, old shema=db1, borrowed=true, fromSlaveDB=true, threadId=33, charset=utf8, txIsolation=3, autocommit=true, attachment=dn1{SELECT * FROM t3 LIMIT 100}, respHandler=SingleNodeHandler [node=dn1{SELECT * FROM t3 LIMIT 100}, packetId=6], host=192.168.211.139, port=3306, statusSync=null, writeQueue=0, modifiedSQLExecuted=false] 2017-12-15 01:54:37.777 DEBUG [$_NIOREACTOR-0-RW] (io.mycat.server.NonBlockingSession.releaseConnection(NonBlockingSession.java:341)) - release connection MySQLConnection [id=26, lastTime=1513320877751, user=root, schema=db1, old shema=db1, borrowed=true, fromSlaveDB=true, threadId=31, charset=utf8, txIsolation=3, autocommit=true, attachment=dn1{SELECT * FROM t3 LIMIT 100}, respHandler=SingleNodeHandler [node=dn1{SELECT * FROM t3 LIMIT 100}, packetId=6], host=192.168.211.139, port=3306, statusSync=null, writeQueue=0, modifiedSQLExecuted=false] mysql> select * from t1; +----+------+-----+------+ | id | name | bu | city | +----+------+-----+------+ | 3 | am3 | net | sz | | 1 | am1 | sy | bj | | 2 | am2 | cs | gz | +----+------+-----+------+ 3 rows in set (0.04 sec) 日志 2017-12-15 02:02:35.818 DEBUG [$_NIOREACTOR-0-RW] (io.mycat.backend.mysql.nio.MySQLConnection.synAndDoExecute(MySQLConnection.java:448)) - con need syn ,total syn cmd 1 commands SET names utf8;schema change:false con:MySQLConnection [id=29, lastTime=1513321355817, user=root, schema=db1, old shema=db1, borrowed=true, fromSlaveDB=true, threadId=35, charset=utf8, txIsolation=3, autocommit=true, attachment=dn1{SELECT * FROM t1 LIMIT 100}, respHandler=io.mycat.backend.mysql.nio.handler.MultiNodeQueryHandler@11eaaf37, host=192.168.211.139, port=3306, statusSync=null, writeQueue=0, modifiedSQLExecuted=false] 2017-12-15 02:02:35.819 DEBUG [$_NIOREACTOR-0-RW] (io.mycat.backend.mysql.nio.MySQLConnection.synAndDoExecute(MySQLConnection.java:448)) - con need syn ,total syn cmd 1 commands SET names utf8;schema change:false con:MySQLConnection [id=20, lastTime=1513321355819, user=root, schema=db2, old shema=db2, borrowed=true, fromSlaveDB=false, threadId=65, charset=utf8, txIsolation=3, autocommit=true, attachment=dn2{SELECT * FROM t1 LIMIT 100}, respHandler=io.mycat.backend.mysql.nio.handler.MultiNodeQueryHandler@11eaaf37, host=192.168.211.142, port=3306, statusSync=null, writeQueue=0, modifiedSQLExecuted=false] 多执行几次检索存在dn1的数据，查看日志，可以确认，数据都是从mysql2(192.168.211.139)读取。实现了读写分离。 8.读写两种不同写法的测试 前面有提到读写分离有两种写法， <dataHost name="mysql1" maxCon="1000" minCon="10" balance="3" writeType="0" dbType="mysql" dbDriver="native" switchType="1" slaveThreshold="100"> <heartbeat>select user()</heartbeat> <!-- can have multi write hosts --> <writeHost host="hostM1" url="192.168.211.138:3306" user="root" password="Alex2010@"> <!-- can have multi read hosts --> <readHost host="hostS2" url="192.168.211.139:3306" user="root" password="Alex2010@"/> </writeHost> </dataHost> 读写分离这里有两种写法： 除了上面的还可以写下面这样： <dataHost name="mysql1" maxCon="1000" minCon="10" balance="3" writeType="0" dbType="mysql" dbDriver="native" switchType="1" slaveThreshold="100"> <heartbeat>select user()</heartbeat> <!-- can have multi write hosts --> <writeHost host="hostM1" url="192.168.211.138:3306" user="root" password="Alex2010@"> </writeHost> <writeHost host="hostM1" url="192.168.211.139:3306" user="root" password="Alex2010@"> </writeHost> </dataHost> 区别是上面的那种写法，如果主服务器挂了，从服务器不能读了。 下面的这种写法，主服务器挂了，从服务器依然可以正常读取。 现在服务器的写法是第一种，主服务器挂了，从服务器不能读了。执行看看 [root@mysql1 ~]# systemctl stop mysqld.service [root@mysql1 ~]# systemctl status mysqld.service ● mysqld.service - MySQL Server Loaded: loaded (/usr/lib/systemd/system/mysqld.service; enabled; vendor preset: disabled) Active: inactive (dead) since Fri 2017-12-15 02:16:43 EST; 35s ago Docs: man:mysqld(8) [root@mysql1 ~]# mysql -uroot -p123456 -P8066 -h127.0.0.1 mysql: [Warning] Using a password on the command line interface can be insecure. Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 2 Server version: 5.6.29-mycat-1.6-RELEASE-20161028204710 MyCat Server (OpenCloundDB) Copyright (c) 2000, 2017, Oracle and/or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners. Type 'help;' or '\h' for help. Type '\c' to clear the current input statement. mysql> select * from t1; ERROR 3000 (HY000): No MyCAT Database selected mysql> select * from t1; ERROR 3000 (HY000): No MyCAT Database selected 确实无法读取 测试第二种 修改schema.xml配置文件 重新启动mysql和mycat 保证环境正常 正常使用环境，我们现在关闭mysql1就是主节点 [root@mysql1 conf]# systemctl stop mysqld.service [root@mysql1 conf]# systemctl status mysqld.service ● mysqld.service - MySQL Server Loaded: loaded (/usr/lib/systemd/system/mysqld.service; enabled; vendor preset: disabled) Active: inactive (dead) since Fri 2017-12-15 02:23:55 EST; 23s ago Docs: man:mysqld(8) 检索数据看看 [root@mysql1 ~]# mysql -uroot -p123456 -P8066 -h127.0.0.1 mysql: [Warning] Using a password on the command line interface can be insecure. Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 1 Server version: 5.6.29-mycat-1.6-RELEASE-20161028204710 MyCat Server (OpenCloundDB) Copyright (c) 2000, 2017, Oracle and/or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners. Type 'help;' or '\h' for help. Type '\c' to clear the current input statement. mysql> use hello; Reading table information for completion of table and column names You can turn off this feature to get a quicker startup with -A Database changed mysql> select * from t1; +----+------+-----+------+ | id | name | bu | city | +----+------+-----+------+ | 3 | am3 | net | sz | | 1 | am1 | sy | bj | | 2 | am2 | cs | gz | +----+------+-----+------+ 3 rows in set (0.46 sec) 果然如此，孰优孰劣无须说明了吧。 后记：通过环境的搭建和简单的测试，达到了设计的预期目标。标签：check current 全局 计划 基本 oca register 情况 ima
原文地址：http://blog.51cto.com/goome/2058947
