码迷,mamicode.com
首页 > 其他好文 > 详细

华为交换机基础DHCP配置

时间:2018-01-19 11:45:46      阅读:185      评论:0      收藏:0      [点我收藏+]

标签:family   dhcp服务器   图片   png   gateway   微软   ali   day   mask   

技术分享图片

技术分享图片

配置两个地址池:192.168.1.0/24和192.168.2.0/24

配置两个VLAN:10和20

将四台主机分别加入VLAN

自动获取IP地址,确保全网互通。

步骤:

[DHCP]DHCP enable

打开DHCP功能

 

[DHCP]vlan batch 10 20

[DHCP]ip pool vlan10

[DHCP]gateway-list 192.168.1.254

[DHCP]network 192.168.1.0 mask 255.255.255.0

[DHCP]lease day 3

[DHCP]dns-list 8.8.8.8/

[DHCP]ip pool VLAN 20

[DHCP]gateway-list 192.168.2.254

[DHCP]network 192.168.2.0 mask 255.255.255.0

[DHCP]lease day 3

[DHCP]dns-list 8.8.8.8/

 

在服务器上创建VLAN10;20;IP地址池VLAN 10和IP地址池 VLAN 20.

 

[DHCP]interface vlanif10

[DHCP]ip address 192.168.1.254 255.255.255.0

[DHCP]dhcp select global

[DHCP] interface vlanif20

[DHCP]ip address 192.168.2.254 255.255.255.0

[DHCP]dhcp select global

给VLAN10,VLAN20配置IP/

[DHCP]interface gi0/0/1

[DHCP]port link-type trunk

[DHCP]port trunk allow-pass all

[DHCP]interface gi0/0/2

[DHCP]port link-type trunk

[DHCP]port trunk allow-pass all

给DHCP服务器1口和2口配置trunk链路

[SW1]vlan batch 10 20

[SW1]interface gi0/1

[SW1]port link-type access

[SW1]port default vlan 10

[SW1]interface gi0/2

[SW1]port link-type access

[SW1]port default vlan 10

[SW1]interface gi0/3

[SW1]port link-type trunk

[SW1]port trunk allow-pass all

在交换机一上把端口1;2加入VLAN 10;端口3设置成trunk链路

[SW1]DHCP enable

打开DHCP功能。///

交换机二也做相同操作;


验证测试保存



华为交换机基础DHCP配置

标签:family   dhcp服务器   图片   png   gateway   微软   ali   day   mask   

原文地址:http://blog.51cto.com/13569390/2062673

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!