码迷，mamicode.com
首页 > 其他好文 > 详细

某小型公司网络构建拓扑

时间：2018-01-23 01:00:03      阅读：205      评论：0      收藏：0      [点我收藏+]

标签：work   lin   routing   comm   enter   flags   bit   isp   子网   

实验名称：实现全网互通

实验拓扑：
技术分享图片

所需设备：
1、两台路由器

                                 2、两台三层交换机

                                 3、5台PC

                                 4、一台server （没用上面的功能其实也就是当PC使用）

地址规划：

设备 IP地址子网 所属VLAN
PC1 192.168.10.1/24 10
PC3 192.168.20.1/24 20
PC5 192.168.30.1/24 30
PC4 192.168.40.1/24 40
PC2 192.168.50.1/24 50
server 192.168.60.1/24 60
设备 接口 链路模式
LSW1 G0/0/1 access
LSW1 G0/0/3 access
LSW1 G0/0/2 trunk
LSW2 E0/0/5 access
LSW2 E0/0/4 hybrid
LSW2 E0/0/1 hybrid
LSW2 E0/0/22 hybrid
LSW2 E0/0/2 trunk

实验目的：全网互通

实验步骤：

                配置PC机地址：

技术分享图片

技术分享图片

技术分享图片

技术分享图片

技术分享图片

技术分享图片

配置 LSW1

The device is running!

<Huawei>undo t m
Info: Current terminal monitor is off.
<Huawei>
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]int g0/0/1
[Huawei-GigabitEthernet0/0/1]q
[Huawei]vlan 10
[Huawei-vlan10]vlan 20
[Huawei-vlan20]vlan 88
[Huawei-vlan88]q
[Huawei]int g0/0/1
[Huawei-GigabitEthernet0/0/1]p
[Huawei-GigabitEthernet0/0/1]port l
[Huawei-GigabitEthernet0/0/1]port link-t
[Huawei-GigabitEthernet0/0/1]port link-type a
[Huawei-GigabitEthernet0/0/1]port link-type access
[Huawei-GigabitEthernet0/0/1]p
[Huawei-GigabitEthernet0/0/1]port de
[Huawei-GigabitEthernet0/0/1]port default vlan 10
[Huawei-GigabitEthernet0/0/1]q
[Huawei]int g0/0/3
[Huawei-GigabitEthernet0/0/3]p
[Huawei-GigabitEthernet0/0/3]port l
[Huawei-GigabitEthernet0/0/3]port link-t
[Huawei-GigabitEthernet0/0/3]port link-type a
[Huawei-GigabitEthernet0/0/3]port link-type access
[Huawei-GigabitEthernet0/0/3]p
[Huawei-GigabitEthernet0/0/3]port de
[Huawei-GigabitEthernet0/0/3]port default vlan 30
Error: The VLAN does not exist.
[Huawei-GigabitEthernet0/0/3]port default vlan 20
[Huawei-GigabitEthernet0/0/3]q
[Huawei]int vlan 10
[Huawei-Vlanif10]undo shutdown
Info: Interface Vlanif10 is not shutdown.
[Huawei-Vlanif10]ip add 192.168.10.254 255.255.255.0
[Huawei-Vlanif10]q
[Huawei]int vlan 88
[Huawei-Vlanif88]undo shutdown
Info: Interface Vlanif88 is not shutdown.
[Huawei-Vlanif88]ip add 192.168.88.2 24
[Huawei-Vlanif88]q
[Huawei]int g0/0/2
[Huawei-GigabitEthernet0/0/2]p
[Huawei-GigabitEthernet0/0/2]port l
[Huawei-GigabitEthernet0/0/2]port link-t
[Huawei-GigabitEthernet0/0/2]port link-type t
[Huawei-GigabitEthernet0/0/2]port link-type trunk
[Huawei-GigabitEthernet0/0/2]p
[Huawei-GigabitEthernet0/0/2]port t
[Huawei-GigabitEthernet0/0/2]port trunk a
[Huawei-GigabitEthernet0/0/2]port trunk allow-pass vlan all
[Huawei-GigabitEthernet0/0/2]q
[Huawei]ospf
[Huawei-ospf-1]area 0
[Huawei-ospf-1-area-0.0.0.0]net
[Huawei-ospf-1-area-0.0.0.0]network 192.168.10.0 0.0.0.255
[Huawei-ospf-1-area-0.0.0.0]network 192.168.88.0 0.0.0.255
[Huawei-ospf-1-area-0.0.0.0]q

 配置AR1

     <Huawei>undo t m

Info: Current terminal monitor is off.
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]int g0/0/1
[Huawei-GigabitEthernet0/0/1]undo shutdown
Info: Interface GigabitEthernet0/0/1 is not shutdown.
[Huawei-GigabitEthernet0/0/1]ip add 192.168.7.1 24
[Huawei-GigabitEthernet0/0/1]q
[Huawei]int g0/0/0.20
[Huawei-GigabitEthernet0/0/0.20]dot
[Huawei-GigabitEthernet0/0/0.20]dot1q t
[Huawei-GigabitEthernet0/0/0.20]dot1q termination vid 20
[Huawei-GigabitEthernet0/0/0.20]ip add 192.168.20.254 24
[Huawei-GigabitEthernet0/0/0.20]a
[Huawei-GigabitEthernet0/0/0.20]arp b
[Huawei-GigabitEthernet0/0/0.20]arp broadcast enable
[Huawei-GigabitEthernet0/0/0.20]q
[Huawei]int g0/0/0.88
[Huawei-GigabitEthernet0/0/0.88]do
[Huawei-GigabitEthernet0/0/0.88]dot1q t
[Huawei-GigabitEthernet0/0/0.88]dot1q termination vid 88
[Huawei-GigabitEthernet0/0/0.88]ip add 192.168.88.1 24
[Huawei-GigabitEthernet0/0/0.88]a
[Huawei-GigabitEthernet0/0/0.88]arp b
[Huawei-GigabitEthernet0/0/0.88]arp broadcast enable
[Huawei-GigabitEthernet0/0/0.88]q
[Huawei]ospf
[Huawei-ospf-1]area 0
[Huawei-ospf-1-area-0.0.0.0]ne
[Huawei-ospf-1-area-0.0.0.0]network 192.168.20.0 0.0.0.255
[Huawei-ospf-1-area-0.0.0.0]network 192.168.7.0 0.0.0.255
[Huawei-ospf-1-area-0.0.0.0]network 192.168.88.0 0.0.0.255
[Huawei-ospf-1-area-0.0.0.0]

配置AR2

    <Huawei>undo t m

Info: Current terminal monitor is off.
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]int g0/0/1
[Huawei-GigabitEthernet0/0/1]ip add 192.168.7.2 24
[Huawei-GigabitEthernet0/0/1]q
[Huawei]int g0/0/0.50
[Huawei-GigabitEthernet0/0/0.50]dot
[Huawei-GigabitEthernet0/0/0.50]dot1q t
[Huawei-GigabitEthernet0/0/0.50]dot1q termination vid 50
[Huawei-GigabitEthernet0/0/0.50]ip add 192.168.50.254 24
[Huawei-GigabitEthernet0/0/0.50]a
[Huawei-GigabitEthernet0/0/0.50]arp b
[Huawei-GigabitEthernet0/0/0.50]arp broadcast enable
[Huawei-GigabitEthernet0/0/0.50]q
[Huawei]int g0/0/0.60
[Huawei-GigabitEthernet0/0/0.60]do
[Huawei-GigabitEthernet0/0/0.60]dot1q t
[Huawei-GigabitEthernet0/0/0.60]dot1q termination vid 60
[Huawei-GigabitEthernet0/0/0.60]ip add 192.168.60.254 24
[Huawei-GigabitEthernet0/0/0.60]arp b
[Huawei-GigabitEthernet0/0/0.60]arp broadcast enable
[Huawei-GigabitEthernet0/0/0.60]q
[Huawei]int g0/0/0.66
[Huawei-GigabitEthernet0/0/0.66]dot
[Huawei-GigabitEthernet0/0/0.66]dot1q t
[Huawei-GigabitEthernet0/0/0.66]dot1q termination vid 66
[Huawei-GigabitEthernet0/0/0.66]ip add 192.168.66.1 24
[Huawei-GigabitEthernet0/0/0.66]arp b
[Huawei-GigabitEthernet0/0/0.66]arp broadcast enable
[Huawei-GigabitEthernet0/0/0.66]q
[Huawei]ospf
[Huawei-ospf-1]area 0
[Huawei-ospf-1-area-0.0.0.0]net
[Huawei-ospf-1-area-0.0.0.0]network 192.168.50.0 0.0.0.255
[Huawei-ospf-1-area-0.0.0.0]network 192.168.60.0 0.0.0.255
[Huawei-ospf-1-area-0.0.0.0]network 192.168.66.0 0.0.0.255
[Huawei-ospf-1-area-0.0.0.0]q
[Huawei-ospf-1]area0
^
Error: Unrecognized command found at ‘^‘ position.
[Huawei-ospf-1]area 0
[Huawei-ospf-1-area-0.0.0.0]net
[Huawei-ospf-1-area-0.0.0.0]network 192.168.7.0 0.0.0.255
[Huawei-ospf-1-area-0.0.0.0]q
[Huawei-ospf-1]q
[Huawei]disp
[Huawei]display ip rou
[Huawei]display ip routing-table
Route Flags: R - relay, D - download to fib

Routing Tables: Public
Destinations : 19 Routes : 19

Destination/Mask Proto Pre Cost Flags NextHop Interface

  127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0
  127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0

127.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0
192.168.7.0/24 Direct 0 0 D 192.168.7.2 GigabitEthernet
0/0/1
192.168.7.2/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/1
192.168.7.255/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/1
192.168.10.0/24 OSPF 10 3 D 192.168.7.1 GigabitEthernet
0/0/1
192.168.20.0/24 OSPF 10 2 D 192.168.7.1 GigabitEthernet
0/0/1
192.168.50.0/24 Direct 0 0 D 192.168.50.254 GigabitEthernet
0/0/0.50
192.168.50.254/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/0.50
192.168.50.255/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/0.50
192.168.60.0/24 Direct 0 0 D 192.168.60.254 GigabitEthernet
0/0/0.60
192.168.60.254/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/0.60
192.168.60.255/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/0.60
192.168.66.0/24 Direct 0 0 D 192.168.66.1 GigabitEthernet
0/0/0.66
192.168.66.1/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/0.66
192.168.66.255/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/0.66
192.168.88.0/24 OSPF 10 2 D 192.168.7.1 GigabitEthernet
0/0/1
255.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0

[Huawei]dis
[Huawei]display ospf p
[Huawei]display ospf peer b
[Huawei]display ospf peer brief 

 OSPF Process 1 with Router ID 192.168.7.2
      Peer Statistic Information

Area Id Interface Neighbor id State
0.0.0.0 GigabitEthernet0/0/1 192.168.7.1 Full

[Huawei]ospf
[Huawei-ospf-1]area 0
[Huawei-ospf-1-area-0.0.0.0]n
[Huawei-ospf-1-area-0.0.0.0]network 192.168.7.0 0.0.0.255
[Huawei-ospf-1-area-0.0.0.0]network 192.168.50.0 0.0.0.255
[Huawei-ospf-1-area-0.0.0.0]network 192.168.60.0 0.0.0.255
[Huawei-ospf-1-area-0.0.0.0]network 192.168.66.0 0.0.0.255
[Huawei-ospf-1-area-0.0.0.0]

配置 SW2

 <Huawei>undo t m

Info: Current terminal monitor is off.
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]vlan 30
[Huawei-vlan30]vlan 40
[Huawei-vlan40]vlan 50
[Huawei-vlan50]vlan 60
[Huawei-vlan60]vlan 66
[Huawei-vlan66]q
[Huawei]int e0/0/5
[Huawei-Ethernet0/0/5]p
[Huawei-Ethernet0/0/5]port l
[Huawei-Ethernet0/0/5]port link-t
[Huawei-Ethernet0/0/5]port link-type a
[Huawei-Ethernet0/0/5]port link-type access
[Huawei-Ethernet0/0/5]p
[Huawei-Ethernet0/0/5]port de
[Huawei-Ethernet0/0/5]port default vlan 30
[Huawei-Ethernet0/0/5]q
[Huawei]int e0/0/4
[Huawei-Ethernet0/0/4]p
[Huawei-Ethernet0/0/4]port h
[Huawei-Ethernet0/0/4]port hybrid u
[Huawei-Ethernet0/0/4]port hybrid untagged vlan 40 60
[Huawei-Ethernet0/0/4]p
[Huawei-Ethernet0/0/4]port h
[Huawei-Ethernet0/0/4]port hybrid t
[Huawei-Ethernet0/0/4]port hybrid tagged vlan 40
[Huawei-Ethernet0/0/4]q
[Huawei]int e0/0/1
[Huawei-Ethernet0/0/1]p
[Huawei-Ethernet0/0/1]port h
[Huawei-Ethernet0/0/1]port hybrid u
[Huawei-Ethernet0/0/1]port hybrid untagged vlan 50 60
[Huawei-Ethernet0/0/1]port hybrid tagged vlan 50
[Huawei-Ethernet0/0/1]q
[Huawei]int e0/0/22
[Huawei-Ethernet0/0/22] p
[Huawei-Ethernet0/0/22]port h
[Huawei-Ethernet0/0/22]port hybrid u
[Huawei-Ethernet0/0/22]port hybrid untagged vlan 40 50 60
[Huawei-Ethernet0/0/22]p
[Huawei-Ethernet0/0/22]port h
[Huawei-Ethernet0/0/22]port hybrid t
[Huawei-Ethernet0/0/22]port hybrid tagged vlan 60
[Huawei-Ethernet0/0/22]q
[Huawei]int e0/0/2
[Huawei-Ethernet0/0/2]p
[Huawei-Ethernet0/0/2]port
[Huawei-Ethernet0/0/2]port l
[Huawei-Ethernet0/0/2]port link-t
[Huawei-Ethernet0/0/2]port link-type t
[Huawei-Ethernet0/0/2]port link-type trunk
[Huawei-Ethernet0/0/2]p
[Huawei-Ethernet0/0/2]port tr
[Huawei-Ethernet0/0/2]port trunk a
[Huawei-Ethernet0/0/2]port trunk allow-pass vlan all
[Huawei-Ethernet0/0/2]q
[Huawei]int vlan 30
[Huawei-Vlanif30]ip add 192.168.30.254 24
[Huawei-Vlanif30]q
[Huawei]int vlan 40
[Huawei-Vlanif40]ip add 192.168.40.254 24
[Huawei-Vlanif40]q
[Huawei]int vlan 66
[Huawei-Vlanif66]ip add 192.168.66.2 24
[Huawei-Vlanif66]q
[Huawei]ospf
[Huawei-ospf-1]area 0
[Huawei-ospf-1-area-0.0.0.0]ne
[Huawei-ospf-1-area-0.0.0.0]network 192.168.30.0 0.0.0.255
[Huawei-ospf-1-area-0.0.0.0]network 192.168.40.0 0.0.0.255
[Huawei-ospf-1-area-0.0.0.0]network 192.168.66.0 0.0.0.255
[Huawei-ospf-1-area-0.0.0.0]

某小型公司网络构建拓扑

标签：work   lin   routing   comm   enter   flags   bit   isp   子网   

原文地址：http://blog.51cto.com/13467772/2064004
踩
(0)
赞
(0)
   
举报
评论 一句话评论（0）
登录后才能评论！
分享档案
更多>
2021年07月29日 (22)
2021年07月28日 (40)
2021年07月27日 (32)
2021年07月26日 (79)
2021年07月23日 (29)
2021年07月22日 (30)
2021年07月21日 (42)
2021年07月20日 (16)
2021年07月19日 (90)
2021年07月16日 (35)
周排行
mamicode.com排行更多图片
更多
友情链接
兰亭集智   国之画   百度统计   站长统计   阿里云   chrome插件   新版天听网
关于我们 - 联系我们 - 留言反馈
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码！