前言

  prometheus 是监控应用软件类似于nagios.

安装

  1.官网下载prometheus-2.2.0.linux-amd64压缩包，解压,执行./prometheus即可。这里重要的是配置文件。

     a.如果要远程热加载配置文件,启动时加上--web.enable-lifecycle参数。 调用指令是curl -X POST http://localhost:9090/-/reload

     b.重要掌握 prometheus.yml 配置文件.prometheus启动时会加载它。

[root@vm-local1 prometheus-2.2.0.linux-amd64]# cat prometheus.yml 
# my global config
global:
  scrape_interval:     15s # Set the scrape interval to every 15 seconds. Default is every 1 minute.
  evaluation_interval: 15s # Evaluate rules every 15 seconds. The default is every 1 minute.评估间隔
  # scrape_timeout is set to the global default (10s). 默认抓取超时10秒

# Alertmanager configuration #管理报警配置
alerting:
  alertmanagers:
  - static_configs:
    - targets: ["localhost:9093"]  #管理报警包需要单独下载，默认启动端口是9093
      
    

# Load rules once and periodically evaluate them according to the global ‘evaluation_interval‘.
rule_files:
  # - "first_rules.yml"
  # - "second_rules.yml"
  - rules/mengyuan.rules     #要发送报警，就得写规则，定义规则文件

# A scrape configuration containing exactly one endpoint to scrape:
# Here it‘s Prometheus itself.
scrape_configs:    #抓取配置，就是你要抓取那些主机
  # The job name is added as a label `job=<job_name>` to any timeseries scraped from this config.
  - job_name: ‘prometheus‘  #任务名称

    # metrics_path defaults to ‘/metrics‘  #默认抓取监控机的url后缀地址是/metrics
    # scheme defaults to ‘http‘.   #模式是http

    static_configs:
      - targets: [‘localhost:9090‘,‘localhost:9100‘]
        labels:
          group: ‘zus‘    #targets就是要抓取的主机，对应的客户端，我这有两个，把它们俩规定为一个组，组名是zus
  - job_name: dj   #又建立个任务名称
    static_configs:
      - targets: [‘localhost:8000‘]  #我用django自定义的客户端

 注意：

     localhost:9090,默认prometheus提供了数据抓取接口，9100端口是prometheus提供的一个监控客户端

2.安装prometheus客户端

  官网下载node_exporter-0.16.0-rc.1.linux-amd64客户端，解压,执行./node_exporter 即可，默认是9100端口

3.如何自定义一个客户端，其实很简单，只要返回的数据库类型是这样就可以.我这用的django..只要格式正确就可以

def metrics(req):
    ss = "feiji 32" + "\n" + "caidian 31"
    return HttpResponse(ss)

4.编写 rules/mengyuan.rules 规则，规则是发送报警的前提

[root@vm-local1 rules]# cat mengyuan.rules 
groups:
- name: zus
  rules:

  # Alert for any instance that is unreachable for >5 minutes.
  - alert: InstanceDown   #报警名字随便写
    expr: up == 0   #这是一个表达式，如果主机up状态为0,表示关机了，条件为真就会触发报警 可以通过$value得到值
    for: 5s         #5s内，还是0，就发送报警信息，当然是发送给报警管理器
    labels:
      severity: page  #这个类型的报警定了个标签
    annotations:
      summary: "Instance {{ $labels.instance }} down dangqian  {{ $value }}"
      description: "{{ $labels.instance }} of job {{ $labels.job }} has been down for more than 5 minutes."

5.现在安装报警管理器

  a.官网下载alertmanager-0.15.0-rc.1.linux-amd64　　

    重要的还是配置文件，创建修改它

[root@vm-local1 alertmanager-0.15.0-rc.1.linux-amd64]# cat alertmanager.yml 
route:
  receiver: mengyuan2  #接收的名字，默认必须有一个，对应receivers的- name
  group_wait: 1s  #等待1s
  group_interval: 1s #发送间隔1s
  repeat_interval: 1m  #重复发送等待1m分钟再发
  group_by: ["zus"]   
  routes:      #路由了，匹配规则标签的severity:page 走 receiver: mengyuan , 如果routes不写，就会走默认的mengyuan2
  - receiver: mengyuan  
    match:
      severity: page

receivers:
- name: ‘mengyuan‘
  webhook_configs:  #这我用的webhook_configs 钩子方法,  默认会把规则的报警信息发送到127.0.0.1:8000
  - url: http://127.0.0.1:8000
    send_resolved: true
- name: ‘mengyuan2‘
  webhook_configs:
  - url: http://127.0.0.1:8000/2
    send_resolved: true

6.django接收报警发过来的消息

  用Django的  request.body会受到json格式的数据,大概像这样

  {"receiver":"mengyuan","status":"resolved","alerts":[{"status":"resolved","labels":{"alertname":"InstanceDown","group":"zus","instance":"localhost:9100","job":"prometheus","severity":"page"},"annotations":{"description":"localhost:9100 of job prometheus has been down for more than 5 minutes.","summary":"Instance localhost:9100 down dangqian  0"},"startsAt":"2018-04-06T22:34:13.51281763+08:00","endsAt":"2018-04-06T23:07:43.514552824+08:00","generatorURL":"http://vm-local1:9090/graph?g0.expr=up+%3D%3D+0\u0026g0.tab=1"}],"groupLabels":{},"commonLabels":{"alertname":"InstanceDown","group":"zus","instance":"localhost:9100","job":"prometheus","severity":"page"},"commonAnnotations":{"description":"localhost:9100 of job prometheus has been down for more than 5 minutes.","summary":"Instance localhost:9100 down dangqian  0"},"externalURL":"http://vm-local1:9093","version":"4","groupKey":"{}/{severity=\"page\"}:{}"}

 到此，我就可以根据收到的数据，调用邮件接口，或其他第三方报警接口了。

总结：

   本人也是刚入门。做的一个笔记。