标签：ota ann 扩容 max target models sts nod cte
接着上一篇Centos7下GlusterFS分布式存储集群环境部署记录文档，继续做一些补充记录，希望能加深对GlusterFS存储操作的理解和熟悉度。
========================清理glusterfs存储环境=========================
由上面可知，该glusterfs存储集群有四个节点： [root@GlusterFS-master ~]# cat /etc/hosts ....... 192.168.10.239 GlusterFS-master 192.168.10.212 GlusterFS-slave 192.168.10.204 GlusterFS-slave2 192.168.10.220 GlusterFS-slave3 现将四个节点的存储目录/opt/gluster/data全部删除 查看集群节点情况，如下发现glusterfs集群中有三个节点。 由于是在192.168.10.239机器上查看的，所以在集群中默认看不到自己的。 如果在其他集群上执行这个命令，就能查看到192.168.10.239这个节点了 [root@GlusterFS-master ~]# gluster peer status Number of Peers: 3 Hostname: 192.168.10.212 Uuid: f8e69297-4690-488e-b765-c1c404810d6a State: Peer in Cluster (Connected) Hostname: 192.168.10.204 Uuid: a989394c-f64a-40c3-8bc5-820f623952c4 State: Peer in Cluster (Connected) Hostname: 192.168.10.220 Uuid: dd99743a-285b-4aed-b3d6-e860f9efd965 State: Peer in Cluster (Connected) 然后分别将节点从集群中删除（不能在节点机本机的gluster命令下删除自己） [root@GlusterFS-master ~]# gluster //可以在gluster的交互界面里操作 gluster> peer detach 192.168.10.220 peer detach: success gluster> peer detach 192.168.10.204 peer detach: success gluster> peer detach 192.168.10.212 peer detach: success gluster> peer detach 192.168.10.239 peer detach: failed: 192.168.10.239 is localhost //默认在本机是删除不了自己的。需要在别的节点上删除它。 gluster> 登录另一台节点机上，执行将192.168.10.220节点从集群中移除的操作 [root@GlusterFS-slave ~]# gluster gluster> peer detach 192.168.10.239 peer detach: success gluster> 再次查看集群情况，发现没有节点了 [root@GlusterFS-master ~]# gluster peer status Number of Peers: 0 虽然这时候，节点从集群中删除了，但是卷还存在！ [root@GlusterFS-master ~]# gluster volume info Volume Name: models Type: Distributed-Replicate Volume ID: f1945b0b-67d6-4202-9198-639244ab0a6a Status: Stopped Number of Bricks: 2 x 2 = 4 Transport-type: tcp Bricks: Brick1: 192.168.10.239:/opt/gluster/data Brick2: 192.168.10.212:/opt/gluster/data Brick3: 192.168.10.204:/opt/gluster/data Brick4: 192.168.10.220:/opt/gluster/data Options Reconfigured: performance.write-behind: on performance.io-thread-count: 32 performance.flush-behind: on performance.cache-size: 128MB features.quota: on 接着删除之前创建的models卷 [root@GlusterFS-master ~]# gluster volume stop models [root@GlusterFS-master ~]# gluster volume delete models [root@GlusterFS-master ~]# gluster volume info No volumes present 可以在gluster交互界面里执行它的所有相关命令： [root@GlusterFS-master ~]# gluster gluster> volume info No volumes present gluster> peer status Number of Peers: 0 gluster>
=====================dd命令创建虚拟分区，创建存储目录=====================
首先利用dd命令创建虚拟分区，创建存储目录
[root@GlusterFS-master ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/centos-root 36G 1.8G 34G 5% /
devtmpfs 2.9G 0 2.9G 0% /dev
tmpfs 2.9G 0 2.9G 0% /dev/shm
tmpfs 2.9G 8.5M 2.9G 1% /run
tmpfs 2.9G 0 2.9G 0% /sys/fs/cgroup
/dev/vda1 1014M 143M 872M 15% /boot
/dev/mapper/centos-home 18G 33M 18G 1% /home
tmpfs 581M 0 581M 0% /run/user/0
dd命令创建一个虚拟分区出来，格式化并挂载到/data目录下
[root@GlusterFS-master ~]# dd if=/dev/vda1 of=/dev/vdb1
2097152+0 records in
2097152+0 records out
1073741824 bytes (1.1 GB) copied, 2.0979 s, 512 MB/s
[root@GlusterFS-master ~]# du -sh /dev/vdb1
1.0G /dev/vdb1
[root@GlusterFS-master ~]# mkfs.xfs -f /dev/vdb1 //这里格式成xfs格式文件，也可以格式化成ext4格式的。
meta-data=/dev/vdb1 isize=512 agcount=4, agsize=65536 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=0, sparse=0
data = bsize=4096 blocks=262144, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=1
log =internal log bsize=4096 blocks=2560, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
[root@GlusterFS-master ~]# mkdir /data
[root@GlusterFS-master ~]# mount /dev/vdb1 /data
[root@GlusterFS-master ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/centos-root 36G 1.8G 34G 5% /
devtmpfs 2.9G 34M 2.8G 2% /dev
tmpfs 2.9G 0 2.9G 0% /dev/shm
tmpfs 2.9G 8.5M 2.9G 1% /run
tmpfs 2.9G 0 2.9G 0% /sys/fs/cgroup
/dev/vda1 1014M 143M 872M 15% /boot
/dev/mapper/centos-home 18G 33M 18G 1% /home
tmpfs 581M 0 581M 0% /run/user/0
/dev/loop0 976M 2.6M 907M 1% /data
[root@GlusterFS-master ~]# fdisk -l
.......
Disk /dev/loop0: 1073 MB, 1073741824 bytes, 2097152 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
设置开机自动挂载
[root@GlusterFS-master ~]# echo ‘/dev/loop0 /data xfs defaults 1 2‘ >> /etc/fstab
然后创建gluster存储目录
[root@GlusterFS-master ~]# mkdir /data/gluster
以上操作要在四台节点机器上都要执行一遍，即创建存储目录环境！
================创建分布式卷（即Hash卷）及其相关管理操作================
接着将节点添加到集群。这里选择在GlusterFS-master节点上执行：
[root@GlusterFS-master ~]# gluster peer probe 192.168.10.212
peer probe: success.
[root@GlusterFS-master ~]# gluster peer probe 192.168.10.204
peer probe: success.
[root@GlusterFS-master ~]# gluster peer probe 192.168.10.220
peer probe: success.
[root@GlusterFS-master ~]# gluster peer status
Number of Peers: 3
Hostname: 192.168.10.212
Uuid: f8e69297-4690-488e-b765-c1c404810d6a
State: Peer in Cluster (Connected)
Hostname: 192.168.10.204
Uuid: a989394c-f64a-40c3-8bc5-820f623952c4
State: Peer in Cluster (Connected)
Hostname: 192.168.10.220
Uuid: dd99743a-285b-4aed-b3d6-e860f9efd965
State: Peer in Cluster (Connected)
登录其他节点集群查看，就能看到GlusterFS-master节点（192.168.10.239）也在集群中了
[root@GlusterFS-slave ~]# gluster peer status
Number of Peers: 3
Hostname: GlusterFS-master
Uuid: 5dfd40e2-096b-40b5-bee3-003b57a39007
State: Peer in Cluster (Connected)
Hostname: 192.168.10.204
Uuid: a989394c-f64a-40c3-8bc5-820f623952c4
State: Peer in Cluster (Connected)
Hostname: 192.168.10.220
Uuid: dd99743a-285b-4aed-b3d6-e860f9efd965
State: Peer in Cluster (Connected)
----------------------------------------------------------
现在开始创建。这里在GlusterFS-master机器上执行的，默认这里创建的是哈希卷。
如下，它会自动在192.168.10.212节点的/data下面创建个gluster目录（这个目录不需要提前手动创建）
[root@GlusterFS-master ~]# gluster volume create gluster_data 192.168.10.212:/data/gluster force
volume create: gluster_data: success: please start the volume to access data
登录192.168.10.212节点查看，果然在/data目录下自动创建了gluster目录
[root@GlusterFS-slave ~]# ls /data/gluster
[root@GlusterFS-slave ~]# ls /data/ //data分区大小为1G
gluster
......
/dev/loop0 1014M 33M 982M 4% /data
启动卷，查看卷状态
[root@GlusterFS-master ~]# gluster volume start gluster_data
volume start: gluster_data: success
[root@GlusterFS-master ~]# gluster volume info
Volume Name: gluster_data
Type: Distribute
Volume ID: 0f8b2268-9d2f-4b5c-85df-13408825d6b3
Status: Started
Number of Bricks: 1
Transport-type: tcp
Bricks:
Brick1: 192.168.10.212:/data/gluster
挂载卷操作
在客户端机器上执行glusterfs存储挂载的操作
注意，由于上面添加的是192.168.10.212节点，所以客户端要挂载的也是192.168.10.212节点的存储
[root@Client ~]# mkdir /opt/gfsmount
[root@Client ~]# mount -t glusterfs 192.168.10.212:gluster_data /opt/gfsmount
[root@Client ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/centos-root 38G 4.3G 33G 12% /
devtmpfs 1.9G 0 1.9G 0% /dev
tmpfs 1.9G 0 1.9G 0% /dev/shm
tmpfs 1.9G 8.6M 1.9G 1% /run
tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
/dev/vda1 1014M 143M 872M 15% /boot
/dev/mapper/centos-home 19G 33M 19G 1% /home
tmpfs 380M 0 380M 0% /run/user/0
overlay 38G 4.3G 33G 12% /var/lib/docker/overlay2/9904ac8cbcba967de3262dc0d5e230c64ad3c1c53b588048e263767d36df8c1a/merged
shm 64M 0 64M 0% /var/lib/docker/containers/222ec7f21b2495591613e0d1061e4405cd57f99ffaf41dbba1a98c350cd70f60/mounts/shm
192.168.10.212:gluster_data 1014M 33M 982M 4% /opt/gfsmount
上面可知，已经挂载上了glusterfs存储，大小为1G（即是192.168.10.212的存储目录所在的/data分区的空间。
记住：存储目录在节点机的哪个分区下，客户端挂载后就享用这个分区空间。
在客户端挂载目录下测试写数据
[root@Client gfsmount]# mkdir test
[root@Client gfsmount]# touch kevin
[root@Client gfsmount]# ls
kevin test
然后在192.168.10.212的存储目录下发现是正常同步过来的
[root@GlusterFS-slave ~]# cd /data/gluster/
[root@GlusterFS-slave gluster]# ls
kevin test
----------------------------------------------------------
增加brick（即扩容卷）
[root@GlusterFS-master ~]# gluster volume add-brick gluster_data 192.168.10.239:/data/gluster force
volume add-brick: success
[root@GlusterFS-master ~]# gluster volume add-brick gluster_data 192.168.10.204:/data/gluster force
volume add-brick: success
[root@GlusterFS-master ~]# gluster volume add-brick gluster_data 192.168.10.220:/data/gluster force
volume add-brick: success
同样，上面三个节点的/data下会自动创建gluster目录！
查看卷状态
[root@GlusterFS-master ~]# gluster volume info
Volume Name: gluster_data
Type: Distribute
Volume ID: 0f8b2268-9d2f-4b5c-85df-13408825d6b3
Status: Started
Number of Bricks: 4
Transport-type: tcp
Bricks:
Brick1: 192.168.10.212:/data/gluster
Brick2: 192.168.10.239:/data/gluster
Brick3: 192.168.10.204:/data/gluster
Brick4: 192.168.10.220:/data/gluster
然后在到客户端，发现挂载点的容量已经由1G上升到了4G！！（即四个节点的存储目录所在分区空间之和）
[root@Client ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/centos-root 38G 4.3G 33G 12% /
devtmpfs 1.9G 0 1.9G 0% /dev
tmpfs 1.9G 0 1.9G 0% /dev/shm
tmpfs 1.9G 8.6M 1.9G 1% /run
tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
/dev/vda1 1014M 143M 872M 15% /boot
/dev/mapper/centos-home 19G 33M 19G 1% /home
tmpfs 380M 0 380M 0% /run/user/0
overlay 38G 4.3G 33G 12% /var/lib/docker/overlay2/9904ac8cbcba967de3262dc0d5e230c64ad3c1c53b588048e263767d36df8c1a/merged
shm 64M 0 64M 0% /var/lib/docker/containers/222ec7f21b2495591613e0d1061e4405cd57f99ffaf41dbba1a98c350cd70f60/mounts/shm
192.168.10.212:gluster_data 4.0G 130M 3.9G 4% /opt/gfsmount
如上操作后的总结
1）客户端挂载点的容量是集群中四个节点的存储目录所在分区总和。
2）在客户端挂载点下创建目录，所有节点的存储目录（即Brick）下都会同步到。
3）在客户端挂载点的目录下创建的文件，会在3个节点的存储目录内hash分布。
4）直接在客户端挂载点下创建的文件，则这些文件只会单独同步到所挂载的节点（如上是192.168.10.212的/data/gluster目录下），其他节点不会同步！
5）删除卷会造成一些数据丢失，因为被删除节点有数。
比如：
a）客户端在挂载点下创建目录kevin
[root@Client ~]# cd /opt/gfsmount/
[root@Client gfsmount]# mkdir kevin
节点查看
[root@GlusterFS-master ~]# ls /data/gluster/
kevin
[root@GlusterFS-slave ~]# ls /data/gluster/
kevin
[root@GlusterFS-slave2 ~]# ls /data/gluster/
kevin
[root@GlusterFS-slave3 ~]# ls /data/gluster/
kevin
b）客户端在上面挂载点下的目录里创建文件
[root@Client gfsmount]# for i in `seq -w 1 100`; do cp -rp /var/log/messages /opt/gfsmount/kevin/copy-test-$i; done
[root@Client gfsmount]# ls kevin/
copy-test-001 copy-test-014 copy-test-027 copy-test-040 copy-test-053 copy-test-066 copy-test-079 copy-test-092
copy-test-002 copy-test-015 copy-test-028 copy-test-041 copy-test-054 copy-test-067 copy-test-080 copy-test-093
copy-test-003 copy-test-016 copy-test-029 copy-test-042 copy-test-055 copy-test-068 copy-test-081 copy-test-094
copy-test-004 copy-test-017 copy-test-030 copy-test-043 copy-test-056 copy-test-069 copy-test-082 copy-test-095
copy-test-005 copy-test-018 copy-test-031 copy-test-044 copy-test-057 copy-test-070 copy-test-083 copy-test-096
copy-test-006 copy-test-019 copy-test-032 copy-test-045 copy-test-058 copy-test-071 copy-test-084 copy-test-097
copy-test-007 copy-test-020 copy-test-033 copy-test-046 copy-test-059 copy-test-072 copy-test-085 copy-test-098
copy-test-008 copy-test-021 copy-test-034 copy-test-047 copy-test-060 copy-test-073 copy-test-086 copy-test-099
copy-test-009 copy-test-022 copy-test-035 copy-test-048 copy-test-061 copy-test-074 copy-test-087 copy-test-100
copy-test-010 copy-test-023 copy-test-036 copy-test-049 copy-test-062 copy-test-075 copy-test-088
copy-test-011 copy-test-024 copy-test-037 copy-test-050 copy-test-063 copy-test-076 copy-test-089
copy-test-012 copy-test-025 copy-test-038 copy-test-051 copy-test-064 copy-test-077 copy-test-090
copy-test-013 copy-test-026 copy-test-039 copy-test-052 copy-test-065 copy-test-078 copy-test-091
节点查看。发现文件同步到挂载的192.168.10.212节点山上了
[root@GlusterFS-master ~]# ls /data/gluster/kevin/
copy-test-002 copy-test-014 copy-test-036 copy-test-045 copy-test-056 copy-test-070 copy-test-075 copy-test-097
copy-test-009 copy-test-020 copy-test-042 copy-test-047 copy-test-062 copy-test-071 copy-test-080
copy-test-010 copy-test-027 copy-test-043 copy-test-053 copy-test-064 copy-test-072 copy-test-084
copy-test-013 copy-test-035 copy-test-044 copy-test-055 copy-test-068 copy-test-074 copy-test-092
[root@GlusterFS-master ~]# ll /data/gluster/kevin/|wc -l
30
[root@GlusterFS-slave ~]# ls /data/gluster/kevin/
copy-test-003 copy-test-018 copy-test-037 copy-test-050 copy-test-061 copy-test-069 copy-test-089
copy-test-005 copy-test-025 copy-test-040 copy-test-058 copy-test-066 copy-test-076 copy-test-091
copy-test-007 copy-test-026 copy-test-049 copy-test-059 copy-test-067 copy-test-085 copy-test-096
[root@GlusterFS-slave ~]# ll /data/gluster/kevin/|wc -l
22
[root@GlusterFS-slave2 gluster]# ls /data/gluster/kevin/
copy-test-004 copy-test-016 copy-test-024 copy-test-046 copy-test-065 copy-test-082 copy-test-088 copy-test-099
copy-test-006 copy-test-017 copy-test-029 copy-test-048 copy-test-078 copy-test-086 copy-test-093
copy-test-015 copy-test-023 copy-test-033 copy-test-052 copy-test-079 copy-test-087 copy-test-095
[root@GlusterFS-slave2 gluster]# ll /data/gluster/kevin/|wc -l
23
[root@GlusterFS-slave3 ~]# ls /data/gluster/kevin/
copy-test-001 copy-test-019 copy-test-030 copy-test-038 copy-test-054 copy-test-073 copy-test-090
copy-test-008 copy-test-021 copy-test-031 copy-test-039 copy-test-057 copy-test-077 copy-test-094
copy-test-011 copy-test-022 copy-test-032 copy-test-041 copy-test-060 copy-test-081 copy-test-098
copy-test-012 copy-test-028 copy-test-034 copy-test-051 copy-test-063 copy-test-083 copy-test-100
[root@GlusterFS-slave3 ~]# ll /data/gluster/kevin/|wc -l
29
c）如果直接在客户端挂载点下创建文件，则这些文件只会单独同步到所挂载的节点
（如上是192.168.10.212的/data/gluster目录下），其他节点不会同步！
[root@Client gfsmount]# for i in `seq -w 1 30`; do cp -rp /var/log/messages /opt/gfsmount/haha-test-$i; done
[root@Client gfsmount]# ls
haha-test-01 haha-test-05 haha-test-09 haha-test-13 haha-test-17 haha-test-21 haha-test-25 haha-test-29
haha-test-02 haha-test-06 haha-test-10 haha-test-14 haha-test-18 haha-test-22 haha-test-26 haha-test-30
haha-test-03 haha-test-07 haha-test-11 haha-test-15 haha-test-19 haha-test-23 haha-test-27 kevin
haha-test-04 haha-test-08 haha-test-12 haha-test-16 haha-test-20 haha-test-24 haha-test-28
节点查看，发现只是在192.168.10.212节点上有上面创建的那30个文件，其他3个节点都没有
[root@GlusterFS-master ~]# ls /data/gluster/
kevin
[root@GlusterFS-slave ~]# ls /data/gluster/
haha-test-01 haha-test-05 haha-test-09 haha-test-13 haha-test-17 haha-test-21 haha-test-25 haha-test-29
haha-test-02 haha-test-06 haha-test-10 haha-test-14 haha-test-18 haha-test-22 haha-test-26 haha-test-30
haha-test-03 haha-test-07 haha-test-11 haha-test-15 haha-test-19 haha-test-23 haha-test-27 kevin
haha-test-04 haha-test-08 haha-test-12 haha-test-16 haha-test-20 haha-test-24 haha-test-28
[root@GlusterFS-slave2 ~]# ls /data/gluster/
kevin
[root@GlusterFS-slave3 ~]# ls /data/gluster/
kevin
d）删除卷会造成一些数据丢失，因为被删除节点有数。
从卷中删除其中一个节点的brick
[root@GlusterFS-master ~]# gluster volume remove-brick gluster_data 192.168.10.220:/data/gluster
Usage: volume remove-brick <VOLNAME> [replica <COUNT>] <BRICK> ... <start|stop|status|commit|force>
[root@GlusterFS-master ~]# gluster
gluster> volume remove-brick gluster_data 192.168.10.220:/data/gluster force
Removing brick(s) can result in data loss. Do you want to Continue? (y/n) y
volume remove-brick commit force: success
gluster>
查看卷的信息，mount点空间也下降了（少了192.168.10.220的存储空间）
[root@GlusterFS-master ~]# gluster volume info
Volume Name: gluster_data
Type: Distribute
Volume ID: 0f8b2268-9d2f-4b5c-85df-13408825d6b3
Status: Started
Number of Bricks: 3
Transport-type: tcp
Bricks:
Brick1: 192.168.10.212:/data/gluster
Brick2: 192.168.10.239:/data/gluster
Brick3: 192.168.10.204:/data/gluster
客户端的挂载点空间下降到3G了
[root@Client ~]# df -h
Filesystem Size Used Avail Use% Mounted on
.......
192.168.10.212:gluster_data 3.0G 98M 2.9G 4% /opt/gfsmount
[root@Client ~]# ll /opt/gfsmount/kevin|wc -l
73
发现上面在客户端挂载点的kevin目录下创建的100个文件已经少了一部分，因为这部分数据在192.168.10.220节点上，该
节点的brick已经从卷中删除了，所以这部分数据就丢失了！
接着注意下面的操作！！
将上面删除的192.168.10.220的brick添加进去，发现添加失败！
[root@GlusterFS-master ~]# gluster volume add-brick gluster_data 192.168.10.220:/data/gluster
volume add-brick: failed: Staging failed on 192.168.10.220. Error: /data/gluster is already part of a volume
需要删除目录，才能加回来
[root@GlusterFS-slave3 ~]# rm -rf /data/gluster
[root@GlusterFS-slave3 ~]# ll /data
total 0
然后再添加就能成功了
[root@GlusterFS-master ~]# gluster volume add-brick gluster_data 192.168.10.220:/data/gluster
volume add-brick: success
[root@GlusterFS-master ~]# gluster volume info
Volume Name: gluster_data
Type: Distribute
Volume ID: 0f8b2268-9d2f-4b5c-85df-13408825d6b3
Status: Started
Number of Bricks: 4
Transport-type: tcp
Bricks:
Brick1: 192.168.10.212:/data/gluster
Brick2: 192.168.10.239:/data/gluster
Brick3: 192.168.10.204:/data/gluster
Brick4: 192.168.10.220:/data/gluster
添加回来后，客户端的挂载点的容量又上升到4G了
[root@Client ~]# df -h
.......
192.168.10.212:gluster_data 4.0G 131M 3.9G 4% /opt/gfsmount
---------------------------------------------------------------------------------
rebalance操作能够让文件按照之前的规则再分配
做下rebalance，看到新加的节点上分到了文件和目录。
注意，在实际生产环节中，做rebalance，最好在服务器空闲的时间操作
如上，新添加进去的192.168.10.220节点的存储目录下一开始是没有内容的
[root@GlusterFS-slave3 ~]# ls /data/gluster/
[root@GlusterFS-slave3 ~]#
[root@GlusterFS-master ~]# gluster volume rebalance gluster_data start
volume rebalance: gluster_data: success: Initiated rebalance on volume gluster_data.
Execute "gluster volume rebalance <volume-name> status" to check status.
ID: 49277bfa-df25-45c4-b1fb-cbcf8607a23e
再次查看新添加进去的192.168.10.220节点的存储目录，发现就有了数据
[root@GlusterFS-slave3 ~]# ls /data/gluster/
haha-test-03 haha-test-11 haha-test-14 haha-test-16 haha-test-25 haha-test-30 kevin
发现做了rebalance之后，客户端在挂载点下的数据就会均衡地分布到各节点上了
[root@Client ~]# ls /opt/gfsmount/
haha-test-01 haha-test-05 haha-test-09 haha-test-13 haha-test-17 haha-test-21 haha-test-25 haha-test-29
haha-test-02 haha-test-06 haha-test-10 haha-test-14 haha-test-18 haha-test-22 haha-test-26 haha-test-30
haha-test-03 haha-test-07 haha-test-11 haha-test-15 haha-test-19 haha-test-23 haha-test-27 kevin
haha-test-04 haha-test-08 haha-test-12 haha-test-16 haha-test-20 haha-test-24 haha-test-28
[root@Client ~]# ls /opt/gfsmount/kevin/
copy-test-002 copy-test-014 copy-test-026 copy-test-043 copy-test-053 copy-test-066 copy-test-076 copy-test-088
copy-test-003 copy-test-015 copy-test-027 copy-test-044 copy-test-055 copy-test-067 copy-test-078 copy-test-089
copy-test-004 copy-test-016 copy-test-029 copy-test-045 copy-test-056 copy-test-068 copy-test-079 copy-test-091
copy-test-005 copy-test-017 copy-test-033 copy-test-046 copy-test-058 copy-test-069 copy-test-080 copy-test-092
copy-test-006 copy-test-018 copy-test-035 copy-test-047 copy-test-059 copy-test-070 copy-test-082 copy-test-093
copy-test-007 copy-test-020 copy-test-036 copy-test-048 copy-test-061 copy-test-071 copy-test-084 copy-test-095
copy-test-009 copy-test-023 copy-test-037 copy-test-049 copy-test-062 copy-test-072 copy-test-085 copy-test-096
copy-test-010 copy-test-024 copy-test-040 copy-test-050 copy-test-064 copy-test-074 copy-test-086 copy-test-097
copy-test-013 copy-test-025 copy-test-042 copy-test-052 copy-test-065 copy-test-075 copy-test-087 copy-test-099
[root@GlusterFS-master ~]# ls /data/gluster/
haha-test-06 haha-test-07 haha-test-15 haha-test-19 haha-test-22 haha-test-28 kevin
[root@GlusterFS-master ~]# ls /data/gluster/kevin/
copy-test-002 copy-test-014 copy-test-036 copy-test-047 copy-test-059 copy-test-069 copy-test-080 copy-test-097
copy-test-003 copy-test-018 copy-test-037 copy-test-049 copy-test-061 copy-test-070 copy-test-084
copy-test-005 copy-test-020 copy-test-040 copy-test-050 copy-test-062 copy-test-071 copy-test-085
copy-test-007 copy-test-025 copy-test-042 copy-test-053 copy-test-064 copy-test-072 copy-test-089
copy-test-009 copy-test-026 copy-test-043 copy-test-055 copy-test-066 copy-test-074 copy-test-091
copy-test-010 copy-test-027 copy-test-044 copy-test-056 copy-test-067 copy-test-075 copy-test-092
copy-test-013 copy-test-035 copy-test-045 copy-test-058 copy-test-068 copy-test-076 copy-test-096
[root@GlusterFS-slave ~]# ls /data/gluster/
haha-test-01 haha-test-04 haha-test-08 haha-test-17 haha-test-20 haha-test-26 haha-test-27 haha-test-29 kevin
[root@GlusterFS-slave ~]# ls /data/gluster/kevin/
copy-test-002 copy-test-017 copy-test-040 copy-test-050 copy-test-064 copy-test-074 copy-test-086 copy-test-097
copy-test-004 copy-test-020 copy-test-042 copy-test-052 copy-test-065 copy-test-075 copy-test-087 copy-test-099
copy-test-006 copy-test-023 copy-test-043 copy-test-053 copy-test-066 copy-test-076 copy-test-088
copy-test-009 copy-test-024 copy-test-044 copy-test-055 copy-test-067 copy-test-078 copy-test-089
copy-test-010 copy-test-027 copy-test-045 copy-test-056 copy-test-068 copy-test-079 copy-test-091
copy-test-013 copy-test-029 copy-test-046 copy-test-058 copy-test-069 copy-test-080 copy-test-092
copy-test-014 copy-test-033 copy-test-047 copy-test-059 copy-test-070 copy-test-082 copy-test-093
copy-test-015 copy-test-035 copy-test-048 copy-test-061 copy-test-071 copy-test-084 copy-test-095
copy-test-016 copy-test-036 copy-test-049 copy-test-062 copy-test-072 copy-test-085 copy-test-096
[root@GlusterFS-slave2 ~]# ls /data/gluster/
haha-test-02 haha-test-09 haha-test-12 haha-test-18 haha-test-23 kevin
haha-test-05 haha-test-10 haha-test-13 haha-test-21 haha-test-24
[root@GlusterFS-slave2 ~]# ls /data/gluster/kevin/
copy-test-004 copy-test-016 copy-test-024 copy-test-046 copy-test-065 copy-test-082 copy-test-088 copy-test-099
copy-test-006 copy-test-017 copy-test-029 copy-test-048 copy-test-078 copy-test-086 copy-test-093
copy-test-015 copy-test-023 copy-test-033 copy-test-052 copy-test-079 copy-test-087 copy-test-095
[root@GlusterFS-slave3 ~]# ls /data/gluster/
haha-test-03 haha-test-11 haha-test-14 haha-test-16 haha-test-25 haha-test-30 kevin
[root@GlusterFS-slave3 ~]# ls /data/gluster/kevin/
查看下平衡状态
[root@GlusterFS-master ~]# gluster volume rebalance gluster_data status
Node Rebalanced-files size scanned failures skipped status run time in secs
--------- ----------- ----------- ----------- ----------- ----------- ------------ --------------
localhost 29 164.8KB 105 0 0 completed 1.00
192.168.10.212 43 248.7KB 131 0 0 completed 1.00
192.168.10.204 0 0Bytes 105 0 0 completed 0.00
192.168.10.220 0 0Bytes 105 0 0 completed 0.00
volume rebalance: gluster_data: success:
--------------------------------------------------------------------------
接着进行卸载挂载点，停止卷
这个操作很危险，但是卷删除了，下面的数据还在：
[root@Client ~]# umount /opt/gfsmount -lf
[root@GlusterFS-master ~]# gluster volume stop gluster_data
Stopping volume will make its data inaccessible. Do you want to continue? (y/n) y
volume stop: gluster_data: success
[root@GlusterFS-master ~]# gluster volume delete gluster_data
Deleting volume will erase all information about the volume. Do you want to continue? (y/n) y
volume delete: gluster_data: success
[root@GlusterFS-master ~]# gluster volume list
No volumes present in cluster
[root@GlusterFS-master ~]# gluster volume info
No volumes present
gluster_data卷删除了，但是各节点上存储目录下的数据还在
[root@GlusterFS-master ~]# ls /data/gluster/
haha-test-06 haha-test-07 haha-test-15 haha-test-19 haha-test-22 haha-test-28 kevin
[root@GlusterFS-slave ~]# ls /data/gluster/
haha-test-01 haha-test-04 haha-test-08 haha-test-17 haha-test-20 haha-test-26 haha-test-27 haha-test-29 kevin
[root@GlusterFS-slave2 ~]# ls /data/gluster/
haha-test-02 haha-test-09 haha-test-12 haha-test-18 haha-test-23 kevin
haha-test-05 haha-test-10 haha-test-13 haha-test-21 haha-test-24
[root@GlusterFS-slave3 ~]# ls /data/gluster/
haha-test-03 haha-test-11 haha-test-14 haha-test-16 haha-test-25 haha-test-30 kevin
客户端挂载点数据不显示
[root@Client ~]# ls /opt/gfsmount/
[root@Client ~]#
想要清除数据，可以登录到每个节点上删除brick下面的数据
[root@GlusterFS-master ~]# rm -rf /data/gluster
[root@GlusterFS-slave ~]# rm -rf /data/gluster
[root@GlusterFS-slave2 ~]# rm -rf /data/gluster
[root@GlusterFS-slave3 ~]# rm -rf /data/gluster
标签：ota ann 扩容 max target models sts nod cte
原文地址：https://www.cnblogs.com/kevingrace/p/8778123.html
