码迷,mamicode.com
首页 > 其他好文 > 详细

Flannel网络组件部署

时间:2018-04-12 13:44:45      阅读:176      评论:0      收藏:0      [点我收藏+]

标签:K8S   flannel   

在部署K8S之前,需要在集群服务器上部署CNI容器网络组件,从而实现集群的网络互联互通。目前可选的组件比较多,例如flannel、calico、weave等,各容器网络组件对比可参考文档:http://dockone.io/article/2599

本文介绍flannel网络组件的部署,配置环境在完成前文etcd集群和tls认证配置后。
一、生成flannel证书文件

# mkdir flanneld
# cd flanneld
# cat flanneld-csr.json 
{
  "CN": "flanneld",
  "hosts": [],
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "FuZhou",
      "L": "FuZhou",
      "O": "k8s",
      "OU": "System"
    }
  ]
}

# cfssl gencert -ca=/etc/ssl/etcd/ca.pem   -ca-key=/etc/ssl/etcd/ca-key.pem   -config=/etc/ssl/etcd/ca-config.json   -profile=kubernetes flanneld-csr.json | cfssljson -bare flanneld

# mkdir /etc/ssl/flanneld
# cp *.pem /etc/ssl/flanneld/

二、向etcd注册flannel相关信息并验证(执行一次即可)

# cat env.sh   
#!/usr/bin/bash
export CLUSTER_CIDR="172.30.0.0/16"
export ETCD_ENDPOINTS="https://192.168.115.5:2379,https://192.168.115.6:2379,https://192.168.115.7:2379"
export FLANNEL_ETCD_PREFIX="/kubernetes/network"
# source  env.sh

# etcdctl   --endpoints=${ETCD_ENDPOINTS}   --ca-file=/etc/ssl/etcd/ca.pem   --cert-file=/etc/ssl/flanneld/flanneld.pem   --key-file=/etc/ssl/flanneld/flanneld-key.pem   set ${FLANNEL_ETCD_PREFIX}/config ‘{"Network":"‘${CLUSTER_CIDR}‘", "SubnetLen": 24, "Backend": {"Type": "vxlan"}}‘

# etcdctl    --endpoints=${ETCD_ENDPOINTS}    --ca-file=/etc/ssl/etcd/ca.pem    --cert-file=/etc/ssl/flanneld/flanneld.pem    --key-file=/etc/ssl/flanneld/flanneld-key.pem  get ${FLANNEL_ETCD_PREFIX}/config

技术分享图片
三、下载部署flannel

# cd /usr/local/src/
# wget  https://github.com/coreos/flannel/releases/download/v0.10.0/flannel-v0.10.0-linux-amd64.tar.gz

# tar -zxvpf flannel-v0.10.0-linux-amd64.tar.gz 
# cp {flanneld,mk-docker-opts.sh}  /usr/local/bin/ 

# cat /usr/lib/systemd/system/flanneld.service 
[Unit]
Description=Flanneld overlay address etcd agent
After=network.target
After=network-online.target
Wants=network-online.target
After=etcd.service
Before=docker.service

[Service]
Type=notify
ExecStart=/usr/local/bin/flanneld   -etcd-cafile=/etc/ssl/etcd/ca.pem   -etcd-certfile=/etc/ssl/flanneld/flanneld.pem   -etcd-keyfile=/etc/ssl/flanneld/flanneld-key.pem   -etcd-endpoints=https://192.168.115.5:2379,https://192.168.115.6:2379,https://192.168.115.7:2379   -etcd-prefix=/kubernetes/network
ExecStartPost=/usr/local/bin/mk-docker-opts.sh -k DOCKER_NETWORK_OPTIONS -d /run/flannel/docker
Restart=on-failure

[Install]
WantedBy=multi-user.target
RequiredBy=docker.service

# systemctl daemon-reload
# systemctl start flanneld 
# systemctl status flanneld -l

技术分享图片
将flannel二进制程序文件和证书文件复制到vm2和vm3

# cd /usr/lib/systemd/system/
# scp flanneld.service  vm2:$(pwd)
# scp flanneld.service  vm3:$(pwd)

# scp -rp /etc/ssl/flanneld/ vm2:/etc/ssl/
# scp -rp /etc/ssl/flanneld/ vm3:/etc/ssl/
# scp -rp /usr/local/bin/flanneld  /usr/local/bin/mk-docker-opts.sh  vm2:/usr/local/bin/
# scp -rp /usr/local/bin/flanneld  /usr/local/bin/mk-docker-opts.sh  vm3:/usr/local/bin/

四、验证

# ifconfig flannel.1 && ssh vm2 ifconfig flannel.1  && ssh vm3 ifconfig flannel.1 

技术分享图片

# etcdctl    --endpoints=${ETCD_ENDPOINTS}    --ca-file=/etc/ssl/etcd/ca.pem    --cert-file=/etc/ssl/flanneld/flanneld.pem    --key-file=/etc/ssl/flanneld/flanneld-key.pem  ls ${FLANNEL_ETCD_PREFIX}/subnets

技术分享图片

Flannel网络组件部署

标签:K8S   flannel   

原文地址:http://blog.51cto.com/ylw6006/2097303

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!