码迷,mamicode.com
首页 > 其他好文 > 详细

filebeat configure

时间:2018-04-27 13:37:00      阅读:147      评论:0      收藏:0      [点我收藏+]

标签:mat   ===   general   template   config   messages   username   trace   protocol   

docker run -d --rm -v ./filebeat.yml:/usr/share/filebeat/filebeat.yml -v /var/log:/var/log  docker.elastic.co/beats/filebeat:6.1.1


 

###################### Filebeat Configuration Example #########################

# This file is an example configuration file highlighting only the most common
# options. The filebeat.full.yml file from the same directory contains all the
# supported options with more comments. You can use it as a reference.
#
# You can find the full configuration reference here:
# https://www.elastic.co/guide/en/beats/filebeat/index.html

#=========================== Filebeat prospectors =============================

filebeat.prospectors:

# Each - is a prospector. Most options can be set at the prospector level, so
# you can use different prospectors for various configurations.
# Below are the prospector specific configurations.

- input_type: log
  # Paths that should be crawled and fetched. Glob based paths.
  paths:
    - /var/log/**/*.log
 
    #- c:\programdata\elasticsearch\logs\*

  # Exclude lines. A list of regular expressions to match. It drops the lines that are
  # matching any regular expression from the list.
  #exclude_lines: ["^DBG"]

  # Include lines. A list of regular expressions to match. It exports the lines that are
  # matching any regular expression from the list.
  #include_lines: ["^ERR", "^WARN"]

  # Exclude files. A list of regular expressions to match. Filebeat drops the files that
  # are matching any regular expression from the list. By default, no files are dropped.
#  exclude_files: [".gz$"]

  # Optional additional fields. These field can be freely picked
  # to add additional information to the crawled log files for filtering
  #fields:
  #  level: debug
  #  review: 1

  ### Multiline options

  # Mutiline can be used for log messages spanning multiple lines. This is common
  # for Java Stack Traces or C-Line Continuation

  # The regexp Pattern that has to be matched. The example pattern matches all lines starting with [
  multiline.pattern: ^\[

  # Defines if the pattern set under pattern should be negated or not. Default is false.
  multiline.negate: false

  # Match can be set to "after" or "before". It is used to define if lines should be append to a pattern
  # that was (not) matched before or after or as long as a pattern is not matched based on negate.
  # Note: After is the equivalent to previous and before is the equivalent to to next in Logstash
  multiline.match: after


#================================ General =====================================

# The name of the shipper that publishes the network data. It can be used to group
# all the transactions sent by a single shipper in the web interface.
name: "storm"

# The tags of the shipper are included in their own field with each
# transaction published.
tags: ["storm", "web-tier"]

# Optional fields that you can specify to add additional information to the
# output.
#fields:
#  env: TonyBen
# Set to false to disable template loading.

# Configure what outputs to use when sending the data collected by the beat.
# Multiple outputs may be used.

#-------------------------- Elasticsearch output ------------------------------
output.elasticsearch:
  # Array of hosts to connect to.
  hosts: ["pet-cloud01:9200","pet-cloud01:9201"]
  indices:
    - index: "filebeat-%{[beat.name]}-%{[beat.version]}-%{+yyyy.MM.dd}"
#      when.contains:
#        source: "mongo"
  #index: "storm1"
  # Optional protocol and basic auth credentials.
  #protocol: "https"
  #username: "elastic"
  #password: "changeme"

#----------------------------- Logstash output --------------------------------
#output.logstash:
  # The Logstash hosts
#  hosts: ["172.23.46.21:5000"]
#  index: "storm"
  # Optional SSL. By default is off.
  # List of root certificates for HTTPS server verifications
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Certificate for SSL client authentication
  #ssl.certificate: "/etc/pki/client/cert.pem"

  # Client Certificate Key
  #ssl.key: "/etc/pki/client/cert.key"

#================================ Logging =====================================

# Sets log level. The default log level is info.
# Available log levels are: critical, error, warning, info, debug
logging.level: debug

# At debug level, you can selectively enable logging only for some components.
# To enable all selectors use ["*"]. Examples of other selectors are "beat",
# "publish", "service".
#logging.selectors: ["*"]

 

filebeat configure

标签:mat   ===   general   template   config   messages   username   trace   protocol   

原文地址:https://www.cnblogs.com/tben/p/8960963.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!