RMAN命令DELETE操作总结

标签：figure   lang   use   new   width   ascii   lis   ESS   port   

本篇总结一下RMAN命令中的DELETE操作，DELETE命令用于删除RMAN备份记录以及相应的物理文件。

To delete physical backups and copies as well as do the following:

1： Update their repository records in the target control file to status DELETED

2： Remove their repository records from the recovery catalog (if you use a catalog)

When running RMAN interactively, DELETE displays a list of the files and prompts

you for confirmation before deleting any file in the list. When reading commands from

a command file, RMAN will not prompt for confirmation.

DELETE removes the physical files from the backup media, deletes the record of

the backup from the recovery catalog (if RMAN is connected to a recovery catalog),

and updates the records of these backups in the control file to status DELETED

删除归档日志

删除某个Sequence之前（包含该Sequence）的归档日志

RMAN>delete archivelog until sequence xxx;

RMAN>delete archivelog from sequence xxx until  sequence xxx;

删除系统时间1天以前的归档日志，不会删除闪回区有效的归档日志(可以指定删除多久日志)

RMAN>delete archivelog all completed before ‘sysdate-1‘;

force参数表示会删除有效归档日志

RMAN>delete force archivelog all completed before ‘sysdate-1‘;

删除某个时间段的归档日志，例如删除20天前到2天前的归档日志。

RMAN>delete archivelog from time ‘sysdate-20‘ until time ‘sysdate-2‘;

RMAN>delete archivelog from time ‘sysdate-1‘;

注意：此命令会删除闪回区的有效归档日志。

删除所有的归档日志。

RMAN>delete noprompt archivelog all;   

RMAN>delete noprompt archivelog all completed before ‘sysdate‘; 

RMAN> delete expired archivelog all;

 注意：delete expired archivelog all  实际上此命令不会真正删除归档日志，它删除的是那些本来RMAN以为存在但是实际上在磁盘或者磁带上已经被删除了文件的信息，实际删除的只是RMAN资料库或控制文件中的记录；

RMAN> delete obsolete;

RMAN> delete noprompt obsolete;

 注意：delete obsolete这个是清理过期备份，它也会删除过期的归档日志。但是特殊情况下，除闪回区有效的归档日志不会删除。

 上面都是使用RMAN命令删除归档日志，最后一种方式，也是最不推荐的一种方式就是使用命令从系统系统删除归档日志，使用rm删除了备份文件后，需要执行crosscheck archivelog all命令校检归档日志是否失效。

删除备份

删除过期备份

删除过期备份，RMAN会根据备份冗余策略确定备份是否过期。然后删除过期的备份。

RMAN> report obsolete;

RMAN> delete obsolete;

RMAN retention policy will be applied to the command

RMAN retention policy is set to redundancy 1

using channel ORA_DISK_1

Deleting the following obsolete backups and copies:

Type                 Key    Completion Time    Filename/Handle

-------------------- ------ ------------------ --------------------

Backup Set           1      18-MAY-17         

  Backup Piece       1      18-MAY-17           /u03/backup/backupsets/ora_df944345823_s1_s1

Control File Copy     1      18-MAY-17          /u03/backup/backupsets/controlfile.copy

Do you really want to delete the above objects (enter YES or NO)? yes

deleted backup piece

backup piece handle=/u03/backup/backupsets/ora_df944345823_s1_s1 recid=1 stamp=944345824

deleted control file copy

control file copy filename=/u03/backup/backupsets/controlfile.copy recid=1 stamp=944347366

Deleted 2 objects

删除无效备份

  RMAN> delete expired backup;

关于delete obsolete 与delete expired backup的区别：

备份集有两种状态A(Available,RMAN认为该项存在于备份介质上)， X(Expired，备份存在于控制文件或恢复目录中，但是并没有物理存在于备份介质上），一般要运行CROSSCHECK才能检查，关于delete expired与delete obsolete的区别

  delete obsolete 会删除旧于备份保留策略定义的备份数据同时也更新RMAN资料库以及控制文件。

  delete expired 删除的是那些本来RMAN以为存在但是实际上在磁盘或者磁带上已经被删除了的信息，删除的只是RMAN资料库中的记录信息，也就是说delete expired是不会删除备份集文件的。

 英文相关资料资料如下：

RMAN> delete obsolete;

Removes only files whose status in the repository is EXPIRED. RMAN marks backups and copies as expired when you run a CROSSCHECK command and the files are absent or inaccessible. To determine which files are expired, run a LIST EXPIRED command.

RMAN> delete obsolete;

Deletes data file backups and copies recorded in the RMAN repository that are obsolete, that is, no longer needed (see Example 2-66). RMAN also deletes obsolete archived redo log files and log backups.

RMAN determines which backups and copies of data files are no longer needed, which in turn determines when logs (and backups of logs) are no longer needed. RMAN considers the creation of a data file as a backup when deciding which logs to keep.

RMAN first uses the options specified with obsOperandList to determine which files are obsolete. If you do not specify options in obsOperandList, then RMAN uses the options specified in CONFIGURE RETENTION POLICY.

Note: DELETE OBSOLETE considers only the backup retention policy and does not use the configured archived log deletion policy to determine which logs are obsolete. In contrast, DELETE ARCHIVELOG ALL considers only the configured archived log deletion policy.

Note: If you make a backup with the KEEP UNTIL TIME clause, then this backup becomes obsolete after the specified KEEP time passes and is removed by DELETE OBSOLETE. RMAN does not consider the backup retention policy for archival backups whose KEEP time has expired.

删除EXPIRED副本

RMAN> delete expired copy;

删除特定印象副本

RMAN> delete datafile copy ‘xxxxxxxxxxx‘;

删除特定备份集

RMAN> delete backupset 24;

using channel ORA_DISK_1

List of Backup Pieces

BP Key  BS Key  Pc# Cp# Status      Device Type Piece Name

------- ------- --- --- ----------- ----------- ----------

24      24      1   1   AVAILABLE   DISK        /u01/app/oracle/flash_recovery_area/GSP/backupset/kerryfull_GSP_20170520_25

Do you really want to delete the above objects (enter YES or NO)? yes

deleted backup piece

backup piece handle=/u01/app/oracle/flash_recovery_area/GSP/backupset/kerryfull_GSP_20170520_25 RECID=24 STAMP=944472557

Deleted 1 objects

删除特定备份片

RMAN> delete backuppiece ‘/u01/app/oracle/flash_recovery_area/GSP/backupset/kerryfull_GSP_20170520_26‘;

using channel ORA_DISK_1

List of Backup Pieces

BP Key  BS Key  Pc# Cp# Status      Device Type Piece Name

------- ------- --- --- ----------- ----------- ----------

25      25      1   1   AVAILABLE   DISK        /u01/app/oracle/flash_recovery_area/GSP/backupset/kerryfull_GSP_20170520_26

Do you really want to delete the above objects (enter YES or NO)? yes

deleted backup piece

backup piece handle=/u01/app/oracle/flash_recovery_area/GSP/backupset/kerryfull_GSP_20170520_26 RECID=25 STAMP=944472653

Deleted 1 objects

删除所有备份集

RMAN> delete backup;

RMAN> delete noprompt backup;

删除所有备份文件副本

RMAN> delete datafilecopy all;

删除某个备份文件副本

RMAN> delete datafilecopy xxx;

RMAN命令DELETE操作总结

标签：figure   lang   use   new   width   ascii   lis   ESS   port   

原文地址：https://www.cnblogs.com/kerrycode/p/9046372.html