标签：Keepalived单双主模型配置 Keepalived
Keepalived单双主模型配置[root@keepalived-1 ~]# hostnamectl set-hostname keepalived-1
[root@keepalived-1 ~]# yum install keepalived.x86_64主配置文件：/etc/keepalived/keepalived.conf
主程序文件：/usr/sbin/keepalived
主keepalived服务器：
[root@keepalived-1 ~]# vim /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
notification_email {
root@localhost
}
notification_email_from keepalived@localhost
smtp_server 127.0.0.1
smtp_connect_timeout 5
router_id 10.10.10.101
vrrp_mcast_group4 224.0.122.22
}
vrrp_instance VI_1 {
state MASTER
interface ens33
virtual_router_id 11
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass 11112222
}
virtual_ipaddress {
10.10.1.1/16 dev ens33
}
}备服务器：
抓包结果如下：
13:47:53.028784 IP 10.10.10.102 > 224.0.122.22: VRRPv2, Advertisement, vrid 11, prio 98, authtype simple, intvl 1s, length 20
13:47:54.030591 IP 10.10.10.102 > 224.0.122.22: VRRPv2, Advertisement, vrid 11, prio 98, authtype simple, intvl 1s, length 20
13:47:55.032137 IP 10.10.10.102 > 224.0.122.22: VRRPv2, Advertisement, vrid 11, prio 98, authtype simple, intvl 1s, length 20
13:47:56.033873 IP 10.10.10.102 > 224.0.122.22: VRRPv2, Advertisement, vrid 11, prio 98, authtype simple, intvl 1s, length 20
13:47:56.033883 IP 10.10.10.101 > 224.0.122.22: VRRPv2, Advertisement, vrid 11, prio 100, authtype simple, intvl 1s, length 20
13:47:57.040529 IP 10.10.10.101 > 224.0.122.22: VRRPv2, Advertisement, vrid 11, prio 100, authtype simple, intvl 1s, length 20
13:47:58.041992 IP 10.10.10.101 > 224.0.122.22: VRRPv2, Advertisement, vrid 11, prio 100, authtype simple, intvl 1s, length 20
13:47:59.043760 IP 10.10.10.101 > 224.0.122.22: VRRPv2, Advertisement, vrid 11, prio 100, authtype simple, intvl 1s, length 20日志结果如下：
主：
May 25 13:41:31 keepalived-1 Keepalived_vrrp[1872]: Sending gratuitous ARP on ens33 for 10.10.1.1
May 25 13:41:31 keepalived-1 Keepalived_vrrp[1872]: VRRP_Instance(VI_1) Sending/queueing gratuitous ARPs on ens33 for 10.10.1.1
May 25 13:41:31 keepalived-1 Keepalived_vrrp[1872]: Sending gratuitous ARP on ens33 for 10.10.1.1
备：
May 25 13:41:25 keepalived-2 Keepalived_vrrp[1761]: VRRP_Instance(VI_1) Received advert with higher priority 100, ours 98
May 25 13:41:25 keepalived-2 Keepalived_vrrp[1761]: VRRP_Instance(VI_1) Entering BACKUP STATE
May 25 13:41:25 keepalived-2 Keepalived_vrrp[1761]: VRRP_Instance(VI_1) removing protocol VIPs.使用ip a l 命令查看ip地址
主
ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:98:88:45 brd ff:ff:ff:ff:ff:ff
inet 10.10.10.101/16 brd 10.10.255.255 scope global ens33
valid_lft forever preferred_lft forever
inet 10.10.1.1/16 scope global secondary ens33
valid_lft forever preferred_lft forever
inet6 fe80::20c:29ff:fe98:8845/64 scope link
备
ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:92:37:53 brd ff:ff:ff:ff:ff:ff
inet 10.10.10.102/16 brd 10.10.255.255 scope global ens33
valid_lft forever preferred_lft forever
inet6 fe80::20c:29ff:fe92:3753/64 scope link再次停止主keepalived-server查看
日志：
May 25 13:48:29 keepalived-2 Keepalived_vrrp[1781]: Sending gratuitous ARP on ens33 for 10.10.1.1
May 25 13:48:29 keepalived-2 Keepalived_vrrp[1781]: VRRP_Instance(VI_1) Sending/queueing gratuitous ARPs on ens33 for 10.10.1.1
May 25 13:48:29 keepalived-2 Keepalived_vrrp[1781]: Sending gratuitous ARP on ens33 for 10.10.1.1抓包：
13:48:22.073929 IP 10.10.10.101 > 224.0.122.22: VRRPv2, Advertisement, vrid 11, prio 100, authtype simple, intvl 1s, length 20
13:48:22.701737 IP 10.10.10.101 > 224.0.122.22: VRRPv2, Advertisement, vrid 11, prio 0, authtype simple, intvl 1s, length 20
13:48:23.320348 IP 10.10.10.102 > 224.0.122.22: VRRPv2, Advertisement, vrid 11, prio 98, authtype simple, intvl 1s, length 20
13:48:24.321473 IP 10.10.10.102 > 224.0.122.22: VRRPv2, Advertisement, vrid 11, prio 98, authtype simple, intvl 1s, length 20Ip地址信息：
ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:92:37:53 brd ff:ff:ff:ff:ff:ff
inet 10.10.10.102/16 brd 10.10.255.255 scope global ens33
valid_lft forever preferred_lft forever
inet 10.10.1.1/16 scope global secondary ens33
valid_lft forever preferred_lft forever
inet6 fe80::20c:29ff:fe92:3753/64 scope link实验结果：（抢占模式分析）
备keepalived先启动是会发起arp免费广播，当局域网中已有且只有它一个的话，他会将模式更改为：MASTER，将ip地址添加到自己的路由中，同时也会继续向局域中发送arp广播，（只在组播地址中发送，抓包监听也只能监听组播地址。）
当主keepalived-server开启服务器后（宕机恢复后也是如此），同时也接受道备keepalived发送的ARP广播中附带的优先级的值98，与自己的优先级进行比对，自己的优先级高于备keepalived-server的优先级，发送arp广播，他会向组播网络中发送免费的arp广播并附带优先级100的值，备keepalived-server收到后，与自己的优先级比对，没有100高则转换模式进入BACKUP模式；主keepalived-server开始发起免费的ARP广播；模式切换完成。
当主keepalived-server宕机或关闭是会发送一个优先级为0的arp广播，备keepalived-server接收到主keepalived的广播后，发起arp广播并将自己的模式改为MASTER模式（如果组内拥有三台以上主机优先级最低的不会发起arp广播，也没有日志信息。只有所有高于最低优先级的keepalived-server都宕机了，才会抢占，否则不会。）
非抢占模式：优先级高的主机宕机恢复后，不会抢占，只有当现运行的keepalived-server出现宕机，它才会抢占MASTER，称为主keepalived-server，（一般不设置此模式，）
如果主server的性能高于备server，建议设置成抢占模式或配置成双主，非抢占模式不适用双主模式。
Keepalived-server1上配置：在上边单主模型基础上添加添置：
下边为单主模型的配置，只是copy一份，没有更改。
! Configuration File for keepalived
global_defs {
notification_email {
root@localhost
}
notification_email_from keepalived@localhost
smtp_server 127.0.0.1
smtp_connect_timeout 5
router_id 10.10.10.101
vrrp_mcast_group4 224.0.122.22
}
vrrp_instance VI_1 {
state MASTER
interface ens33
virtual_router_id 11
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass 11112222
}
virtual_ipaddress {
10.10.1.1/16 dev ens33
}
}Keepalived-server1上配置,下边为新添加配置：
vrrp_instance VI_2 {
state BACKUP
interface ens33
virtual_router_id 21
priority 98
advert_int 1
authentication {
auth_type PASS
auth_pass 22221111
}
virtual_ipaddress {
10.10.1.2/16 dev ens33
}
}Keepalived-server2上配置：在下边keepalived-2单主模型基础上添加添置：
vrrp_instance VI_22{
state MASTER
interface ens33
virtual_router_id 21
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass 22221111
}
virtual_ipaddress {
10.10.1.2/16 dev ens33
}
}启动时查看地址：
先开启server-2（两个地址都在server2上）
ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:72:5b:f2 brd ff:ff:ff:ff:ff:ff
inet 10.10.10.102/16 brd 10.10.255.255 scope global ens33
valid_lft forever preferred_lft forever
inet 10.10.1.2/16 scope global secondary ens33
valid_lft forever preferred_lft forever
inet 10.10.1.1/16 scope global secondary ens33
valid_lft forever preferred_lft forever
inet6 fe80::20c:29ff:fe72:5bf2/64 scope link再开启server-1（server-1将1.1的地址抢占回去，server1和server2每个设备上各一个地址，互为主同时也互为备）
Server-1：
ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:98:88:45 brd ff:ff:ff:ff:ff:ff
inet 10.10.10.101/16 brd 10.10.255.255 scope global ens33
valid_lft forever preferred_lft forever
inet 10.10.1.1/16 scope global secondary ens33
valid_lft forever preferred_lft forever
inet6 fe80::20c:29ff:fe98:8845/64 scope link
Server-2：
ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:72:5b:f2 brd ff:ff:ff:ff:ff:ff
inet 10.10.10.102/16 brd 10.10.255.255 scope global ens33
valid_lft forever preferred_lft forever
inet 10.10.1.2/16 scope global secondary ens33
valid_lft forever preferred_lft forever
inet6 fe80::20c:29ff:fe72:5bf2/64 scope link关闭server-2（当server2关闭服务器，两个地址全都在server1上。）
ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:98:88:45 brd ff:ff:ff:ff:ff:ff
inet 10.10.10.101/16 brd 10.10.255.255 scope global ens33
valid_lft forever preferred_lft forever
inet 10.10.1.1/16 scope global secondary ens33
valid_lft forever preferred_lft forever
inet 10.10.1.2/16 scope global secondary ens33
valid_lft forever preferred_lft forever
inet6 fe80::20c:29ff:fe98:8845/64 scope link结果：
先开启server-2（两个地址都在server2上）
再开启server-1（server-1将1.1的地址抢占回去，server1和server2每个设备上各一个地址，互为主同时也互为备）
关闭server-2（当server2关闭服务器，两个地址全都在server1上。）
标签：Keepalived单双主模型配置 Keepalived
原文地址：http://blog.51cto.com/12105235/2125059
