码迷,mamicode.com
首页 > 其他好文 > 详细

keepalived问题

时间:2014-09-30 16:19:39      阅读:176      评论:0      收藏:0      [点我收藏+]

标签:blog   io   ar   for   文件   sp   div   2014   art   

  

Sep 30 11:41:34 XSXSH-LB2 Keepalived[2735]: Starting Keepalived v1.2.12 (04/08,2014)
Sep 30 11:41:34 XSXSH-LB2 Keepalived[2736]: Starting Healthcheck child process, pid=2737
Sep 30 11:41:34 XSXSH-LB2 Keepalived[2736]: Starting VRRP child process, pid=2738
Sep 30 11:41:34 XSXSH-LB2 Keepalived_healthcheckers[2737]: Netlink reflector reports IP 10.20.10.7 added
Sep 30 11:41:34 XSXSH-LB2 Keepalived_healthcheckers[2737]: Netlink reflector reports IP 10.20.10.7 added
Sep 30 11:41:34 XSXSH-LB2 Keepalived_healthcheckers[2737]: Registering Kernel netlink reflector
Sep 30 11:41:34 XSXSH-LB2 Keepalived_healthcheckers[2737]: Registering Kernel netlink command channel
Sep 30 11:41:34 XSXSH-LB2 Keepalived_vrrp[2738]: Netlink reflector reports IP 10.20.10.7 added
Sep 30 11:41:34 XSXSH-LB2 Keepalived_vrrp[2738]: Netlink reflector reports IP 10.20.10.7 added
Sep 30 11:41:34 XSXSH-LB2 Keepalived_vrrp[2738]: Registering Kernel netlink reflector
Sep 30 11:41:34 XSXSH-LB2 Keepalived_vrrp[2738]: Registering Kernel netlink command channel
Sep 30 11:41:34 XSXSH-LB2 Keepalived_vrrp[2738]: Registering gratuitous ARP shared channel
Sep 30 11:41:34 XSXSH-LB2 Keepalived_healthcheckers[2737]: Opening file ‘/etc/keepalived/keepalived.conf‘.
Sep 30 11:41:34 XSXSH-LB2 Keepalived_healthcheckers[2737]: Configuration is using : 7642 Bytes
Sep 30 11:41:34 XSXSH-LB2 Keepalived_vrrp[2738]: Opening file ‘/etc/keepalived/keepalived.conf‘.
Sep 30 11:41:34 XSXSH-LB2 Keepalived_vrrp[2738]: Configuration is using : 63387 Bytes
Sep 30 11:41:34 XSXSH-LB2 Keepalived_vrrp[2738]: Using LinkWatch kernel netlink reflector...
Sep 30 11:41:34 XSXSH-LB2 Keepalived_vrrp[2738]: VRRP_Instance(VI_1) Entering BACKUP STATE
Sep 30 11:41:34 XSXSH-LB2 Keepalived_vrrp[2738]: VRRP sockpool: [ifindex(2), proto(112), unicast(0), fd(10,11)]
Sep 30 11:41:34 XSXSH-LB2 Keepalived_healthcheckers[2737]: Using LinkWatch kernel netlink reflector...
Sep 30 11:41:38 XSXSH-LB2 Keepalived_vrrp[2738]: VRRP_Instance(VI_1) Transition to MASTER STATE
Sep 30 11:41:39 XSXSH-LB2 Keepalived_vrrp[2738]: VRRP_Instance(VI_1) Entering MASTER STATE
Sep 30 11:41:39 XSXSH-LB2 Keepalived_vrrp[2738]: VRRP_Instance(VI_1) setting protocol VIPs.
Sep 30 11:41:39 XSXSH-LB2 Keepalived_vrrp[2738]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for 10.20.10.10
Sep 30 11:41:39 XSXSH-LB2 Keepalived_healthcheckers[2737]: Netlink reflector reports IP 10.20.10.10 added

 

backup节点怎么自己提升为master了。master机器正常,不知道backup节点如何判断master失效的,然后提升自己为master 。
master机器正常 没啥异常。怎么backup节点提升了。
 
讨论导致如下信息
1) 配置文件
2) 路由设置
3) 防火墙 (广播地址 需放行)
 

keepalived问题

标签:blog   io   ar   for   文件   sp   div   2014   art   

原文地址:http://www.cnblogs.com/jimingsong/p/4001821.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!