码迷,mamicode.com
首页 > 其他好文 > 详细

树莓派3B安装LEDE

时间:2018-07-17 00:12:49      阅读:1000      评论:0      收藏:0      [点我收藏+]

标签:地址   pil   ems   官网   树莓派   err   https   targe   led   

本来想安装openwrt的,但是op官方没有支持pi3,甚至op都不怎么发新版了,仅LEDE分支有缓慢的更新。。离题了,之前给pi3装过LEDE,体验不是很好。今天到openwrt官网看了下,发现之前lede不支持pi3,之前刷的固件是为pi2准备的。好在现在已经为pi3做了适配。

根据官方的说法, The Raspberry Pi is supported in the brcm2708 target. Subtargets are bcm2708 for Raspberry Pi 1, bcm2709 for the Raspberry Pi 2, bcm2710 for the Raspberry Pi 3. Raspberry Pi Zero is not currently supported by any release, but bcm2708 subtarget compiled from a later trunk seems to work.

树莓派3b需要下载bcm2710版本的镜像,一开使没找到,原来把它放在bcm2708里面了。

下载地址:https://downloads.openwrt.org/releases/17.01.4/targets/brcm2708/bcm2710/

树莓派3B安装LEDE

标签:地址   pil   ems   官网   树莓派   err   https   targe   led   

原文地址:https://www.cnblogs.com/sherlock-merlin/p/9321114.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!