APUE信号-程序汇总

#include<signal.h>
#include<unistd.h>


/**存在的问题是，可能在一个繁忙的系统中调用pause之前超时，
 * 直接调用信号处理程序，pause后如果没有捕捉到其他信号，
 * 该程序将永远被挂起
 */
static void
sig_alrm(int signo)
{
        /* nothing to d o, just return to wake up the pause */
}

unsigned int
sleep1(unsigned int nsecs)
{
    if (signal(SIGALRM, sig_alrm) == SIG_ERR)
        return(nsecs);
    alarm(nsecs);/*      start the timer */
    pause();/* next caught signal wakes us up */
    return(alarm(0));/* turn off timer, return unslept time */
}

#include<setjmp.h>
#include<signal.h>
#include<unistd.h>

static jmp_buf env_alrm;

static void
sig_alrm(int signo)
{
    longjmp(env_alrm, 1);
}

unsigned int
sleep2(unsigned int nsecs)
{
    if (signal(SIGALRM, sig_alrm) == SIG_ERR)
        return(nsecs);
    if(setjmp(env_alrm) == 0){
        alarm(nsecs);/*      start the timer */
        pause();/* next caught signal wakes us up */
    }
    
    return(alarm(0));/* turn off timer, return unslept time */
}

#include "util.h"
#include <setjmp.h>

static void sig_alrm(int);
static jmp_buf env_alrm;

int         
main(void)
{
    int n;
    char line[MAXLINE];
    if (signal(SIGALRM, sig_alrm) == SIG_ERR)
        err_sys("signal(SIGALRM) error");
    if (setjmp(env_alrm) != 0)
        err_quit("read timeout");
    
    alarm(10);
    if ((n = read(STDIN_FILENO, line, MAXLINE)) < 0)
        err_sys("read error");
    alarm(0);
    
    write(STDOUT_FILENO, line, n);
    exit(0);
}

static void
sig_alrm(int signo)
{
    longjmp(env_alrm, 1);
}

#include<signal.h>
#include<errno.h>
/**
 * 假设把 sigset_t 视为整数，各种位操作
 */
/* <signal.h> usually defines NSIG to include signa l number 0 */
#define SIGBAD(signo)((signo) <= 0 || (signo) >= NSIG)

int sigaddset(sigset_t *set, int signo)
{
    if (SIGBAD(signo)) { errno = EINVAL; return(-1); }
    
    *set |= 1 << (signo - 1);/* turn bit on */
    return(0);
}       

int
sigdelset(sigset_t *set, int signo)
{
    if (SIGBAD(signo)) { errno = EINVAL; return(-1); }
    *set &= ~(1 << (signo - 1));/* turn bit off */
    retur   n(0);
}

int
sigismember(const sigset_t *set, int signo)
{
    if (SIGBAD(signo)) { errno = EINVAL; return(-1); }
    return((*set & (1 << (signo - 1))) != 0);
}

#include "util.h"
#include<errno.h>

void
pr_mask(const char *str){
	sigset_t sigset;
	int errno_save;

	errno_save = errno;
	if(sigprocmask(0, NULL, &sigset) < 0)
		err_sys("sigpromask failed.");
	printf("%s",str);
	if(sigismember(&sigset, SIGINT)) 
        printf("SIGINT ");
	if(sigismember(&sigset, SIGQUIT)) 
        printf("SIGQUIT ");
	if(sigismember(&sigset, SIGUSR1)) 
        printf("SIGUSR1 ");
	if(sigismember(&sigset, SIGALRM)) 
        printf("SIGARM ");

	//remaining signals can get here.
	printf("\n");
	errno = errno_save;
}

#include "util.h"

static void sig_quit(int);

int
main(void)
{
    sigset_t newmask, oldmask, pendmask;
    if (signal(SIGQUIT, sig_quit) == SIG_ERR)
        err_sys("can't catch SIGQUIT");
    /*
    * Block SIGQUIT and save current signal mask.
    */
    sigemptyset(&newmask);
    sigaddset(&newmask, SIGQUIT);
    if (sigprocmask(SIG_BLOCK, &newmask, &oldmask) < 0)
        err_sys("SIG_BLOCK error");
    
    sleep(5);/* SIGQUIT here will remain pending */

    if (sigpending(&pendmask) < 0)
        err_sys("sigpending error");
    if (sigismember(&pendmask, SIGQUIT))
        printf("\nSIGQUIT pending\n");
    
    /*
    * Reset signal mask which unblocks SIGQUIT.
    */
    if (sigprocmask(SIG_SETMASK, &oldmask, NULL) < 0)
        err_sys("SIG_SETMASK error");
    printf("SIGQUIT unblocked\n");
    
    sleep(5);/* SIGQUIT here will terminate with core file */
    exit(0);
}

static void
sig_quit(int signo)
{
    printf("caught SIGQUIT\n");
    if (signal(SIGQUIT, SIG_DFL) == SIG_ERR)
        err_sys("can't reset SIGQUIT");
}

#include "util.h"
// Reliable version of signal(),using POSIX sigaction;
Sigfunc *signal(int signo,Sigfunc *func){
	struct sigaction act,oact;
	
	act.sa_handler = func;
	sigemptyset(&act.sa_mask);
	act.sa_flags = 0;
	if(signo == SIGALRM){
		#ifdef SA_INTERRUPT
			act.sa_flags |= SA_INTERRUPT;
		#endif
	}else{
		#ifdef SA_RESTART
			act.sa_flags |= SA_RESTART;
		#endif
	}
	if(sigaction(signo,&act,&oact)<0)
		return(SIG_ERR);
	return(oact.sa_handler);
}

#include "util.h"

// will stop all the inttrupted signal,that is sigaction's 
//default behavior ,so deal with the early aspects;
Sigfunc *
signal_intr(int signo, Sigfunc *func)
{
    struct sigaction    act, oact;
    act.sa_handler = func;
    sigemptyset(&act.sa_mask);
    act.sa_flags = 0;

#ifdef SA_INTERRUPT
    act.sa_flags |= SA_INTERRUPT;
#endif
    if (sigaction(signo, &act, &oact) < 0)
        return(SIG_ERR);
    return(oact.sa_handler);
}

#include "util.h"
#include<setjmp.h>
#include<time.h>

static void sig_usr(int),sig_alrm(int);
static sigjmp_buf jmpbuf;
static volatile sig_atomic_t canjmp;

int 
main(void){
	if(signal(SIGUSR1,sig_usr) == SIG_ERR)
		err_sys("register signal SIGUSR1 error");
	if(signal(SIGALRM,sig_alrm) == SIG_ERR)
		err_sys("register signal SIGALRM error");
	
	pr_mask("starting main:");
	
	if(sigsetjmp(jmpbuf,1)){
		pr_mask("ending main:");
		exit(0);
	}
	
	canjmp = 1;// now sigsetjmp is ok ,can jmp there
	for(;;)
		pause();
}

static void
sig_usr(int signo){
	time_t starttime;
	if(canjmp == 0)
		return;//not prepare well,so ignore it ;
	pr_mask("starting sig_usr:");
	alarm(3); // SIGALRM in 3 sec
	starttime = time(NULL);
	for(;;)
		if(time(NULL) > starttime + 5)	
			break;
	pr_mask("ending sig_usr:");
	
	canjmp = 0;
	siglongjmp(jmpbuf,1);
}

static void
sig_alrm(int signo){
	pr_mask("in sig_alrm:");
}

#include "util.h"

static void sig_int(int);

int
main(void)
{
    sigset_t newmask, oldmask, waitmask;
    pr_mask("program start: ");
    if (signal(SIGINT, sig_int) == SIG_ERR)
        err_sys("signal(SIGINT) error");
    sigemptyset(&waitmask);
    sigaddset(&waitmask, SIGUSR1);
    sigemptyset(&newmask);
    sigaddset(&newmask, SIGINT);
    /*
     * Block SIGINT and save current signal mask.
     * */
    if (sigprocmask(SIG_BLOCK, &newmask, &oldmask) < 0)
        err_sys("SIG_BLOCK error");
    /*
     * Critical region of code.
     */
    pr_mask("in critical region: ");
    /*
     * * Pause, allowing all signals except SIGUSR1.
     */
    if (sigsuspend(&waitmask) != -1)
        err_sys("sigsuspend error");
    pr_mask("after return from sigsuspend: ");
    /*
     * Reset signal mask which unblocks SIGINT.
     */
    if (sigprocmask(SIG_SETMASK, &oldmask, NULL) < 0)
        err_sys("SIG_SETMASK error");
    
    /*
     * And continue processing ...
     */
    pr_mask("program exit: ");
    
    exit(0);
}

static void
sig_int(int signo)
{
    pr_mask("\nin sig_int: ");
}

#include "util.h"

volatile sig_atomic_t	quitflag;	/* set nonzero by signal handler */

static void
sig_int(int signo)	/* one signal handler for SIGINT and SIGQUIT */
{
	if (signo == SIGINT)
		printf("\ninterrupt\n");
	else if (signo == SIGQUIT)
		quitflag = 1;	/* set flag for main loop */
}

int
main(void)
{
	sigset_t	newmask, oldmask, zeromask;

	if (signal(SIGINT, sig_int) == SIG_ERR)
		err_sys("signal(SIGINT) error");
	if (signal(SIGQUIT, sig_int) == SIG_ERR)
		err_sys("signal(SIGQUIT) error");

	sigemptyset(&zeromask);
	sigemptyset(&newmask);
	sigaddset(&newmask, SIGQUIT);

	/*
	 * Block SIGQUIT and save current signal mask.
	 */
	if (sigprocmask(SIG_BLOCK, &newmask, &oldmask) < 0)
		err_sys("SIG_BLOCK error");

	while (quitflag == 0)
		sigsuspend(&zeromask);
	// suspend will use zeromask to replace the new mask , this is to say ,
	//here we temporarily change the signal mask, can catch any signal ;
	/*
	 * SIGQUIT has been caught and is now blocked; do whatever.
	 */
	quitflag = 0;

	/*
	 * Reset signal mask which unblocks SIGQUIT.
	 */
	if (sigprocmask(SIG_SETMASK, &oldmask, NULL) < 0)
		err_sys("SIG_SETMASK error");

	exit(0);
}

#include "util.h"

static volatile sig_atomic_t sigflag; 	/* set nonzero by sig handler */
static sigset_t newmask, oldmask, zeromask;

static void sig_usr(int signo)	/* one signal handler for SIGUSR1 and SIGUSR2 */
{
	sigflag = 1;
}

void TELL_WAIT(void)
{
	if (signal(SIGUSR1, sig_usr) == SIG_ERR)
		err_sys("signal(SIGUSR1) error");
	if (signal(SIGUSR2, sig_usr) == SIG_ERR)
		err_sys("signal(SIGUSR2) error");
	sigemptyset(&zeromask);
	sigemptyset(&newmask);
	sigaddset(&newmask, SIGUSR1);
	sigaddset(&newmask, SIGUSR2);

	/*
	 * Block SIGUSR1 and SIGUSR2, and save current signal mask.
	 */
	if (sigprocmask(SIG_BLOCK, &newmask, &oldmask) < 0)
		err_sys("SIG_BLOCK error");
}

void TELL_PARENT(pid_t pid)
{
	kill(pid, SIGUSR2);		/* tell parent we're done */
}

void WAIT_PARENT(void)
{
	while (sigflag == 0)
		sigsuspend(&zeromask);	/* and wait for parent */
	sigflag = 0;

	/*
	 * Reset signal mask to original value.
	 */
	if (sigprocmask(SIG_SETMASK, &oldmask, NULL) < 0)
		err_sys("SIG_SETMASK error");
}

void TELL_CHILD(pid_t pid)
{
	kill(pid, SIGUSR1);			/* tell child we're done */
}

void WAIT_CHILD(void)
{
	while (sigflag == 0)
		sigsuspend(&zeromask);	/* and wait for child */
	sigflag = 0;

	/*
	 * Reset signal mask to original value.
	 */
	if (sigprocmask(SIG_SETMASK, &oldmask, NULL) < 0)
		err_sys("SIG_SETMASK error");
}

#include <signal.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>

void
abort(void)         /* POSIX-style abort() function */
{
    sigset_t            mask;
    struct sigaction action;
    
    /*
     * * Caller can't ignore SIGABRT, i   f so reset to default.
     * *       */
    sigaction(SIGABRT, NULL, &action);
    if (action.sa_handler == SIG_IGN) {
        action.sa_handler = SIG_DFL;
        sigaction(SIGABRT, &action, NULL);
    }
    
    if (action.sa_handler == SIG_DFL)
        fflush(NULL);/* flush all open stdio streams */
    /*
     * *   * Caller can't block SIGA          BRT; make sure it's unblocked.
     * *       */
    sigfillset(&mask);
    igdelset(&mask, SIGABRT);/* mask has only SIGABRT turned off */
    sigprocmask(SIG_SETMASK, &mask, NULL);
    kill(getpid(), SIGABRT);/* send the signal */
    
    /*
     * *   * If we're here, p rocess caught SIGABRT and returned.
     * *       */
    fflush(NULL);/* flush all                open stdio streams */
    action.sa_handler = SIG_DFL;
    sigaction(SIGABRT, &action, NULL);/* reset to default */
    igprocmask(SIG_SETMASK, &mask, NU  LL);/* just in case ... */
    kill(getpid(), SIGABRT);/* and one mor                  e time */
    exit(1);/* this should never be executed ... */
}

#include "util.h"

static void sig_int(int signo){
    printf("Caught SIGINT \n");
}
static void sig_chld(int signo){
    printf("Caught SIGCHLD \n");
}
int main(){
 if(signal(SIGINT, sig_int)  == SIG_ERR)
     err_sys("signal(SIGINT) error");
 if(signal(SIGCHLD, sig_chld) == SIG_ERR)
     err_sys("signal(SIGCHLD) error");

 if(system("/bin/ed") < 0)
     err_sys("system(ed) error");

 exit(0);
}

#include<sys/wait.h>
#include<errno.h>
#include<signal.h>
#include<unistd.h>
#include <stdio.h>

int
system(  const char *cmdstring)/* with appropriate signal handling */
{
    pid_t                   pid;
    int status;
    struct sigaction ignore, saveintr, savequit;
    sigset_t chldmask, savemask;
    if (cmdstring == NULL)
        return(1);                  /* always a command processor with UNIX */
    
    ignore.sa_handler = SIG_IGN;/* ignore SIGINT and SIGQUIT */
    sigemptyset(&ignore.sa_mask);
    ignore.sa_flags = 0;
    if (sigaction(SIGINT, &ignore, &saveintr) < 0)
        return(-1);
    if (sigaction(SIGQUIT, &ignore, &savequit) < 0)
        return(-1);
    sigemptyset(&chldmask);/* now block SIGCHLD */
    sigaddset(&chldmask, SIGCHLD);
    if(sigprocmask(SIG_BLOCK, &chldmask, &savemask) < 0)
        return(-1);
    
    if ((pid = fork()) < 0) {
        status = -1;/* probably out of processes */
    } else if (pid == 0)     {/* child */
        /* restore previous signal actions & reset signal ma           sk */
        sigaction(SIGINT, &saveintr, NULL);
        sigaction(SIGQUIT, &savequit, NULL);
        sigprocmask(SIG_SETMASK, &savemask, NULL);
        
        execl("/bin/sh", "sh", "-c", cmdstring, (char *)0);
        _exit(127);/* exec error */
    } else {                                /* parent */
        while (waitpid(pid, &status, 0) < 0)
            if (errno != EINTR) {
                status = -1; /* error other than EINTR from waitpid() */
                break;
            }
    }
    
    /* restore previous signal actions & reset signal mask */
    if (sigaction(SIGINT, &saveintr, NULL) < 0)
        return(-1);
    if (sigaction(SIGQUIT, &savequit, NULL) < 0)
        return(-1);
    printf("before unblock SIGCHLD...\n");
    if (sigprocmask(SIG_SETMASK, &savemask, NULL) < 0)
        return(-1);
    
    return(status);
}

#include "util.h"

static void
sig_alrm(int signo)
{
    /* nothing to do, just returning wakes up sigsuspend() */
}

unsigned int
sleep(unsigned int nsecs)
{
    struct sigaction newact, oldact;
    sigset_t                newmask, oldmask, suspmask;
    unsigned int unslept;
    
    /* set our handler, save previous information */
    newact.sa_handler = sig_alrm;
    sigemptyset(&newact.sa_mask);
    newact.sa_flags = 0;
    sigaction(SIGALRM, &newact, &oldact);
    
    /* block SIGALRM and save current signal mask */
    sigemptyset(&newmask);
    sigaddset(&newmask, SIGALRM);
    sigprocmask(SIG_BLOCK, &newmask, &oldmask);
    
    alarm(nsecs);
    
    suspmask = oldmask;
    sigdelset(&suspmask, SIGALRM);/* make sure SIGALRM isn't    blocked */
    sigsuspend(&suspmask);/* wait for any signal to be caught */
    
    /* some signal has been caught, SIGALRM is now blocked */
    
    unslept = alarm(0);
    sigaction(SIGALRM, &oldact, NULL);/* reset previous action */
    
    /* reset signal mask, which unblocks SIGALRM  */
        sigprocmask(SIG_SETMASK, &oldmask, NULL);
    return(unslept);
}