标签：管理员 5.0 hang been down tables enc change 路由表
什么是静态路由？
静态路由是指由用户或网络管理员手工配置的路由信息。当网络的拓扑结构或链路的状态发生变化时，网络管理员需要手工去修改路由表中相关的静态路由信息。静态路由信息在缺省情况下是私有的，不会传递给其他的路由器。
实验环境：华为模拟器eNSP
现在有这样一个拓扑图：
很明显路由器R1和R3之间无法通信，ping一下试试。
[R1]ping 192.168.2.2
PING 192.168.2.2: 56 data bytes, press CTRL_C to break
Request time out
Request time out
Request time out
Request time out
Request time out
--- 192.168.2.2 ping statistics ---
5 packet(s) transmitted
0 packet(s) received
100.00% packet loss全部超时，现在通过添加静态路由使R1和R3之间相互通信，先来看一下R1的路由表：
<R1>dis ip routing-table
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
Destinations : 4 Routes : 4
Destination/Mask Proto Pre Cost Flags NextHop Interface
127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0
127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
192.168.1.0/24 Direct 0 0 D 192.168.1.1 Ethernet0/0/0
192.168.1.1/32 Direct 0 0 D 127.0.0.1 Ethernet0/0/0现在只有回环接口和本地IP，现在来给他添加去往R3的静态路由：
[R1]ip route-static 192.168.2.0 255.255.255.0 192.168.1.2
Jul 25 2018 20:37:00-08:00 R1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 3, the ch
ange loop count is 0, and the maximum number of records is 4095.查看一下路由表：
<R1>dis ip routing-table
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
Destinations : 5 Routes : 5
Destination/Mask Proto Pre Cost Flags NextHop Interface
127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0
127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
192.168.1.0/24 Direct 0 0 D 192.168.1.1 Ethernet0/0/0
192.168.1.1/32 Direct 0 0 D 127.0.0.1 Ethernet0/0/0
192.168.2.0/24 Static 60 0 RD 192.168.1.2 Ethernet0/0/0发现路由表中已经加进了去往R3的静态路由，现在来ping一下R3。
<R1>ping 192.168.2.2
PING 192.168.2.2: 56 data bytes, press CTRL_C to break
Request time out
Request time out
Request time out
Request time out
Request time out
--- 192.168.2.2 ping statistics ---
5 packet(s) transmitted
0 packet(s) received
100.00% packet loss看到无法ping通,因为现在只有去的路由，但是没有回来的路由，也就是说ping的数据包现在只知道怎么去，但是不知道怎么回来，那么现在来给他添加回程路由。
回程路由配在路由器R3上面。
[R3]ip route-static 192.168.1.0 255.255.255.0 192.168.2.1
Jul 25 2018 20:43:10-08:00 R3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 3, the ch
ange loop count is 0, and the maximum number of records is 4095.现在再去R1上面ping一下R3试试。
<R1>ping 192.168.2.2
PING 192.168.2.2: 56 data bytes, press CTRL_C to break
Reply from 192.168.2.2: bytes=56 Sequence=1 ttl=254 time=40 ms
Reply from 192.168.2.2: bytes=56 Sequence=2 ttl=254 time=60 ms
Reply from 192.168.2.2: bytes=56 Sequence=3 ttl=254 time=30 ms
Reply from 192.168.2.2: bytes=56 Sequence=4 ttl=254 time=90 ms
Reply from 192.168.2.2: bytes=56 Sequence=5 ttl=254 time=100 ms
--- 192.168.2.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 30/64/100 ms发现可以ping通了，说明静态路由添加成功。
配置静态路由的命令是ip route-static 要去网段 要去网段的子网掩码 下一跳。
标签：管理员 5.0 hang been down tables enc change 路由表
原文地址：https://www.cnblogs.com/Timesi/p/9368283.html
