码迷，mamicode.com
首页 > 其他好文 > 详细

基于Stm32的RFID-RC522模块的对RFID读写使用

时间：2018-08-14 17:05:34      阅读：173      评论：0      收藏：0      [点我收藏+]

标签：count   usr   mos   参数   one   ...   tco   序列   校验   

????RFID-RC522是一个淘宝上比较常见的一个识别RFID的一个模块。他可以做到对RFID的读写。
????MF RC522 是应用于13.56MHz 非接触式通信中高集成度读写卡系列芯片中的一员。是NXP公司针对“三表”应用推出的一款低电压、低成本、体积小的非接触式读写卡芯片，是智能仪表和便携 式手持设备研发的较好选择

RFID读写卡的过程

????读写卡主要有五个步骤：寻卡，防冲突，选卡，认证，读/写卡。

寻卡

// REQ_ALL代表寻天线区内所有卡，TagType为返回的卡的类型
status= PcdRequest( REQ_ALL , TagType );

TagType返回的卡类型有：
0x4400 = Mifare_UltraLight
0x0400 = Mifare_One(S50)
0x0200 = Mifare_One(S70)
0x0800 = Mifare_Pro(X)
0x4403 = Mifare_DESFire

防冲突

if(!status)
{
    status = PcdAnticoll(SelectedSnr);
    // ......
}

认证

if(!status)
{
    // 认证
    snr = 1;    // 扇区号1
    status = PcdAuthState(KEYA, (snr*4+3), DefaultKey, SelectedSnr);    // 校验1扇区密码，密码位于每一扇区第3块
    // ......
}

四个参数分别是：验证A密钥，块地址，扇区密码，卡序列号

读写卡

if(!status)
{
    //读写卡
    status = PcdRead((snr*4+0), buf);   // 读卡，读取1扇区0块数据到buf[0]-buf[16]
    status = PcdWrite((snr*4+0), "way2");   // 写卡，将buf[0]-buf[16]写入1扇区0块
    if(!status) 
    {
        //读写成功
        printf("read finish!\n");
        printf("读到的值是： %s\n",buf);
        WaitCardOff();
    }
}

代码

以下为核心代码：
main.c

#include "stm32f10x.h"
#include "delay.h"
#include "bsp_usart.h"
#include "RC522.h"

int main()
{
    char status;
    unsigned char snr, buf[16], TagType[2], SelectedSnr[4], DefaultKey[6] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
    
    delay_init();
    usart_init();
    
    PcdInit();
    PcdReset();
    PcdAntennaOff();
    PcdAntennaOn();
    M500PcdConfigISOType( ‘A‘ );

    printf( "init over!\n" );
    while(1){
        // 寻卡
        status= PcdRequest( REQ_ALL , TagType );    // REQ_ALL代表寻天线区内所有卡。TagType为返回的卡类型
        if(!status)
        {
            // 防冲突
            status = PcdAnticoll(SelectedSnr);
            if(!status)
            {
                // 选卡
                status=PcdSelect(SelectedSnr);
                if(!status)
                {
                    // 认证
                    snr = 1;    // 扇区号1
                    status = PcdAuthState(KEYA, (snr*4+3), DefaultKey, SelectedSnr);    // 校验1扇区密码，密码位于每一扇区第3块
                                          // 验证A密钥，块地址，扇区密码，卡序列号
                    {
                        if(!status)
                        {
                            //读写卡
                            status = PcdRead((snr*4+0), buf);   // 读卡，读取1扇区0块数据到buf[0]-buf[16]
//                          status = PcdWrite((snr*4+0), "way2");   // 写卡，将buf[0]-buf[16]写入1扇区0块
                            if(!status) 
                            {
                                //读写成功
                                printf("read finish!\n");
                                printf("读到的值是： %s\n",buf);
                                WaitCardOff();
                            }
                        }
                    }
                }
            }
        }
    }
}

RC522.h

#ifndef __RC522_H
#define __RC522_H

#define MF522_RST_PIN                    GPIO_Pin_11
#define MF522_RST_PORT                   GPIOB
#define MF522_RST_CLK                    RCC_APB2Periph_GPIOB

#define MF522_MISO_PIN                   GPIO_Pin_10
#define MF522_MISO_PORT                  GPIOB
#define MF522_MISO_CLK                   RCC_APB2Periph_GPIOB

#define MF522_MOSI_PIN                   GPIO_Pin_1
#define MF522_MOSI_PORT                  GPIOB
#define MF522_MOSI_CLK                   RCC_APB2Periph_GPIOB

#define MF522_SCK_PIN                    GPIO_Pin_0
#define MF522_SCK_PORT                   GPIOB
#define MF522_SCK_CLK                    RCC_APB2Periph_GPIOB

#define MF522_NSS_PIN                    GPIO_Pin_7
#define MF522_NSS_PORT                   GPIOA
#define MF522_NSS_CLK                    RCC_APB2Periph_GPIOA

#define RST_H                            GPIO_SetBits(MF522_RST_PORT, MF522_RST_PIN)
#define RST_L                            GPIO_ResetBits(MF522_RST_PORT, MF522_RST_PIN)
#define MOSI_H                           GPIO_SetBits(MF522_MOSI_PORT, MF522_MOSI_PIN)
#define MOSI_L                           GPIO_ResetBits(MF522_MOSI_PORT, MF522_MOSI_PIN)
#define SCK_H                            GPIO_SetBits(MF522_SCK_PORT, MF522_SCK_PIN)
#define SCK_L                            GPIO_ResetBits(MF522_SCK_PORT, MF522_SCK_PIN)
#define NSS_H                            GPIO_SetBits(MF522_NSS_PORT, MF522_NSS_PIN)
#define NSS_L                            GPIO_ResetBits(MF522_NSS_PORT, MF522_NSS_PIN)
#define READ_MISO                        GPIO_ReadInputDataBit(MF522_MISO_PORT, MF522_MISO_PIN)

// 函数原型
void PcdInit(void);
char PcdReset(void);
void PcdAntennaOn(void);
void PcdAntennaOff(void);
char PcdRequest(unsigned char req_code,unsigned char *pTagType);
char PcdAnticoll(unsigned char *pSnr);
char PcdSelect(unsigned char *pSnr);
char PcdAuthState(unsigned char auth_mode,unsigned char addr,unsigned char *pKey,unsigned char *pSnr);
char PcdRead(unsigned char addr,unsigned char *pData);
char PcdWrite(unsigned char addr,unsigned char *pData);
char PcdValue(unsigned char dd_mode,unsigned char addr,unsigned char *pValue);
char PcdBakValue(unsigned char sourceaddr, unsigned char goaladdr);
char PcdHalt(void);
char PcdComMF522(unsigned char Command,
                 unsigned char *pInData, 
                 unsigned char InLenByte,
                 unsigned char *pOutData, 
                 unsigned int  *pOutLenBit);
void CalulateCRC(unsigned char *pIndata,unsigned char len,unsigned char *pOutData);
void WriteRawRC(unsigned char Address,unsigned char value);
unsigned char ReadRawRC(unsigned char Address);
void SetBitMask(unsigned char reg,unsigned char mask);
void ClearBitMask(unsigned char reg,unsigned char mask);
char M500PcdConfigISOType(unsigned char type);
void delay_10ms(unsigned int _10ms);
void WaitCardOff(void);

// MF522命令字
#define PCD_IDLE              0x00               //取消当前命令
#define PCD_AUTHENT           0x0E               //验证密钥
#define PCD_RECEIVE           0x08               //接收数据
#define PCD_TRANSMIT          0x04               //发送数据
#define PCD_TRANSCEIVE        0x0C               //发送并接收数据
#define PCD_RESETPHASE        0x0F               //复位
#define PCD_CALCCRC           0x03               //CRC计算


// Mifare_One卡片命令字
#define PICC_REQIDL           0x26               //寻天线区内未进入休眠状态
#define PICC_REQALL           0x52               //寻天线区内全部卡
#define PICC_ANTICOLL1        0x93               //防冲撞
#define PICC_ANTICOLL2        0x95               //防冲撞
#define PICC_AUTHENT1A        0x60               //验证A密钥
#define PICC_AUTHENT1B        0x61               //验证B密钥
#define PICC_READ             0x30               //读块
#define PICC_WRITE            0xA0               //写块
#define PICC_DECREMENT        0xC0               //扣款
#define PICC_INCREMENT        0xC1               //充值
#define PICC_RESTORE          0xC2               //调块数据到缓冲区
#define PICC_TRANSFER         0xB0               //保存缓冲区中数据
#define PICC_HALT             0x50               //休眠

// MF522 FIFO长度定义
#define DEF_FIFO_LENGTH       64                 //FIFO size=64byte

// MF522寄存器定义
// PAGE 0
#define     RFU00                 0x00    
#define     CommandReg            0x01    
#define     ComIEnReg             0x02    
#define     DivlEnReg             0x03    
#define     ComIrqReg             0x04    
#define     DivIrqReg             0x05
#define     ErrorReg              0x06    
#define     Status1Reg            0x07    
#define     Status2Reg            0x08    
#define     FIFODataReg           0x09
#define     FIFOLevelReg          0x0A
#define     WaterLevelReg         0x0B
#define     ControlReg            0x0C
#define     BitFramingReg         0x0D
#define     CollReg               0x0E
#define     RFU0F                 0x0F
// PAGE 1     
#define     RFU10                 0x10
#define     ModeReg               0x11
#define     TxModeReg             0x12
#define     RxModeReg             0x13
#define     TxControlReg          0x14
#define     TxAutoReg             0x15
#define     TxSelReg              0x16
#define     RxSelReg              0x17
#define     RxThresholdReg        0x18
#define     DemodReg              0x19
#define     RFU1A                 0x1A
#define     RFU1B                 0x1B
#define     MifareReg             0x1C
#define     RFU1D                 0x1D
#define     RFU1E                 0x1E
#define     SerialSpeedReg        0x1F
// PAGE 2    
#define     RFU20                 0x20  
#define     CRCResultRegM         0x21
#define     CRCResultRegL         0x22
#define     RFU23                 0x23
#define     ModWidthReg           0x24
#define     RFU25                 0x25
#define     RFCfgReg              0x26
#define     GsNReg                0x27
#define     CWGsCfgReg            0x28
#define     ModGsCfgReg           0x29
#define     TModeReg              0x2A
#define     TPrescalerReg         0x2B
#define     TReloadRegH           0x2C
#define     TReloadRegL           0x2D
#define     TCounterValueRegH     0x2E
#define     TCounterValueRegL     0x2F
// PAGE 3      
#define     RFU30                 0x30
#define     TestSel1Reg           0x31
#define     TestSel2Reg           0x32
#define     TestPinEnReg          0x33
#define     TestPinValueReg       0x34
#define     TestBusReg            0x35
#define     AutoTestReg           0x36
#define     VersionReg            0x37
#define     AnalogTestReg         0x38
#define     TestDAC1Reg           0x39  
#define     TestDAC2Reg           0x3A   
#define     TestADCReg            0x3B   
#define     RFU3C                 0x3C   
#define     RFU3D                 0x3D   
#define     RFU3E                 0x3E   
#define     RFU3F                 0x3F


#define     REQ_ALL               0x52
#define     KEYA                  0x60

// 和MF522通讯时返回的错误代码
#define MI_OK                          (char)0
#define MI_NOTAGERR                    (char)(-1)
#define MI_ERR                         (char)(-2)

#endif

RC522.c

#include "RC522.H"
#include "stm32f10x_gpio.h"

#define MAXRLEN 18                        

void PcdInit()
{
      GPIO_InitTypeDef  GPIO_InitStructure;

      /* Enable the GPIO Clock */
      RCC_APB2PeriphClockCmd(MF522_RST_CLK, ENABLE);

      /* Configure the GPIO pin */
      GPIO_InitStructure.GPIO_Pin = MF522_RST_PIN;
      GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
      GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;

      GPIO_Init(MF522_RST_PORT, &GPIO_InitStructure);

      /* Enable the GPIO Clock */
      RCC_APB2PeriphClockCmd(MF522_MISO_CLK, ENABLE);

      /* Configure the GPIO pin */
      GPIO_InitStructure.GPIO_Pin = MF522_MISO_PIN;
      GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
      GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;

      GPIO_Init(MF522_MISO_PORT, &GPIO_InitStructure);

      /* Enable the GPIO Clock */
      RCC_APB2PeriphClockCmd(MF522_MOSI_CLK, ENABLE);

      /* Configure the GPIO pin */
      GPIO_InitStructure.GPIO_Pin = MF522_MOSI_PIN;
      GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
      GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;

      GPIO_Init(MF522_MOSI_PORT, &GPIO_InitStructure);

      /* Enable the GPIO Clock */
      RCC_APB2PeriphClockCmd(MF522_SCK_CLK, ENABLE);

      /* Configure the GPIO pin */
      GPIO_InitStructure.GPIO_Pin = MF522_SCK_PIN;
      GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
      GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;

      GPIO_Init(MF522_SCK_PORT, &GPIO_InitStructure);

      /* Enable the GPIO Clock */
      RCC_APB2PeriphClockCmd(MF522_NSS_CLK, ENABLE);

      /* Configure the GPIO pin */
      GPIO_InitStructure.GPIO_Pin = MF522_NSS_PIN;
      GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
      GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;

      GPIO_Init(MF522_NSS_PORT, &GPIO_InitStructure);
}

//功    能：寻卡
//参数说明: req_code[IN]:寻卡方式
//                0x52 = 寻感应区内所有符合14443A标准的卡
//                0x26 = 寻未进入休眠状态的卡
//                pTagType[OUT]：卡片类型代码
//                0x4400 = Mifare_UltraLight
//                0x0400 = Mifare_One(S50)
//                0x0200 = Mifare_One(S70)
//                0x0800 = Mifare_Pro(X)
//                0x4403 = Mifare_DESFire
//返    回: 成功返回MI_OK
char PcdRequest(unsigned char req_code,unsigned char *pTagType)
{
   char status;  
   unsigned int  unLen;
   unsigned char ucComMF522Buf[MAXRLEN]; 
//  unsigned char xTest ;
   ClearBitMask(Status2Reg,0x08);
   WriteRawRC(BitFramingReg,0x07);

//  xTest = ReadRawRC(BitFramingReg);
//  if(xTest == 0x07 )
 //   { LED_GREEN  =0 ;}
 // else {LED_GREEN =1 ;while(1){}}
   SetBitMask(TxControlReg,0x03);
 
   ucComMF522Buf[0] = req_code;

   status = PcdComMF522(PCD_TRANSCEIVE,ucComMF522Buf,1,ucComMF522Buf,&unLen);
//     if(status  == MI_OK )
//   { LED_GREEN  =0 ;}
//   else {LED_GREEN =1 ;}
   if ((status == MI_OK) && (unLen == 0x10))
   {    
       *pTagType     = ucComMF522Buf[0];
       *(pTagType+1) = ucComMF522Buf[1];
   }
   else
   {   status = MI_ERR;   }
   
   return status;
}

//功    能：防冲撞
//参数说明: pSnr[OUT]:卡片序列号，4字节
//返    回: 成功返回MI_OK
char PcdAnticoll(unsigned char *pSnr)
{
    char status;
    unsigned char i,snr_check=0;
    unsigned int  unLen;
    unsigned char ucComMF522Buf[MAXRLEN]; 
    

    ClearBitMask(Status2Reg,0x08);
    WriteRawRC(BitFramingReg,0x00);
    ClearBitMask(CollReg,0x80);
 
    ucComMF522Buf[0] = PICC_ANTICOLL1;
    ucComMF522Buf[1] = 0x20;

    status = PcdComMF522(PCD_TRANSCEIVE,ucComMF522Buf,2,ucComMF522Buf,&unLen);

    if (status == MI_OK)
    {
         for (i=0; i<4; i++)
         {   
             *(pSnr+i)  = ucComMF522Buf[i];
             snr_check ^= ucComMF522Buf[i];
         }
         if (snr_check != ucComMF522Buf[i])
         {   status = MI_ERR;    }
    }
    
    SetBitMask(CollReg,0x80);
    return status;
}

//功    能：选定卡片
//参数说明: pSnr[IN]:卡片序列号，4字节
//返    回: 成功返回MI_OK
char PcdSelect(unsigned char *pSnr)
{
    char status;
    unsigned char i;
    unsigned int  unLen;
    unsigned char ucComMF522Buf[MAXRLEN]; 
    
    ucComMF522Buf[0] = PICC_ANTICOLL1;
    ucComMF522Buf[1] = 0x70;
    ucComMF522Buf[6] = 0;
    for (i=0; i<4; i++)
    {
        ucComMF522Buf[i+2] = *(pSnr+i);
        ucComMF522Buf[6]  ^= *(pSnr+i);
    }
    CalulateCRC(ucComMF522Buf,7,&ucComMF522Buf[7]);
  
    ClearBitMask(Status2Reg,0x08);

    status = PcdComMF522(PCD_TRANSCEIVE,ucComMF522Buf,9,ucComMF522Buf,&unLen);
    
    if ((status == MI_OK) && (unLen == 0x18))
    {   status = MI_OK;  }
    else
    {   status = MI_ERR;    }

    return status;
}

//功    能：验证卡片密码
//参数说明: auth_mode[IN]: 密码验证模式
//                 0x60 = 验证A密钥
//                 0x61 = 验证B密钥 
//          addr[IN]：块地址
//          pKey[IN]：密码
//          pSnr[IN]：卡片序列号，4字节
//返    回: 成功返回MI_OK       
char PcdAuthState(unsigned char auth_mode,unsigned char addr,unsigned char *pKey,unsigned char *pSnr)
{
    char status;
    unsigned int  unLen;
    unsigned char i,ucComMF522Buf[MAXRLEN]; 

    ucComMF522Buf[0] = auth_mode;
    ucComMF522Buf[1] = addr;
    for (i=0; i<6; i++)
    {    ucComMF522Buf[i+2] = *(pKey+i);   }
    for (i=0; i<6; i++)
    {    ucComMF522Buf[i+8] = *(pSnr+i);   }
 //   memcpy(&ucComMF522Buf[2], pKey, 6); 
 //   memcpy(&ucComMF522Buf[8], pSnr, 4); 
    
    status = PcdComMF522(PCD_AUTHENT,ucComMF522Buf,12,ucComMF522Buf,&unLen);
    if ((status != MI_OK) || (!(ReadRawRC(Status2Reg) & 0x08)))
    {   status = MI_ERR;   }
    
    return status;
}

//功    能：读取M1卡一块数据
//参数说明: addr[IN]：块地址
//          pData[OUT]：读出的数据，16字节
//返    回: 成功返回MI_OK
char PcdRead(unsigned char addr,unsigned char *pData)
{
    char status;
    unsigned int  unLen;
    unsigned char i,ucComMF522Buf[MAXRLEN]; 

    ucComMF522Buf[0] = PICC_READ;
    ucComMF522Buf[1] = addr;
    CalulateCRC(ucComMF522Buf,2,&ucComMF522Buf[2]);
   
    status = PcdComMF522(PCD_TRANSCEIVE,ucComMF522Buf,4,ucComMF522Buf,&unLen);
    if ((status == MI_OK) && (unLen == 0x90))
 //   {   memcpy(pData, ucComMF522Buf, 16);   }
    {
        for (i=0; i<16; i++)
        {    *(pData+i) = ucComMF522Buf[i];   }
    }
    else
    {   status = MI_ERR;   }
    
    return status;
}

//功    能：写数据到M1卡一块
//参数说明: addr[IN]：块地址
//          pData[IN]：写入的数据，16字节
//返    回: 成功返回MI_OK         
char PcdWrite(unsigned char addr,unsigned char *pData)
{
    char status;
    unsigned int  unLen;
    unsigned char i,ucComMF522Buf[MAXRLEN]; 
    
    ucComMF522Buf[0] = PICC_WRITE;
    ucComMF522Buf[1] = addr;
    CalulateCRC(ucComMF522Buf,2,&ucComMF522Buf[2]);
 
    status = PcdComMF522(PCD_TRANSCEIVE,ucComMF522Buf,4,ucComMF522Buf,&unLen);

    if ((status != MI_OK) || (unLen != 4) || ((ucComMF522Buf[0] & 0x0F) != 0x0A))
    {   status = MI_ERR;   }
        
    if (status == MI_OK)
    {
        //memcpy(ucComMF522Buf, pData, 16);

        for (i=0; i<16; i++)
        {    ucComMF522Buf[i] = *(pData+i);   }
        CalulateCRC(ucComMF522Buf,16,&ucComMF522Buf[16]);

        status = PcdComMF522(PCD_TRANSCEIVE,ucComMF522Buf,18,ucComMF522Buf,&unLen);
        if ((status != MI_OK) || (unLen != 4) || ((ucComMF522Buf[0] & 0x0F) != 0x0A))
        {   status = MI_ERR;   }
    }
    
    return status;
}

//功    能：命令卡片进入休眠状态
//返    回: 成功返回MI_OK
char PcdHalt(void)
{
    unsigned int  unLen;
    unsigned char ucComMF522Buf[MAXRLEN]; 

    ucComMF522Buf[0] = PICC_HALT;
    ucComMF522Buf[1] = 0;
    CalulateCRC(ucComMF522Buf,2,&ucComMF522Buf[2]);
 
    PcdComMF522(PCD_TRANSCEIVE,ucComMF522Buf,4,ucComMF522Buf,&unLen);

    return MI_OK;
}

//用MF522计算CRC16函数
void CalulateCRC(unsigned char *pIndata,unsigned char len,unsigned char *pOutData)
{
    unsigned char i,n;
    ClearBitMask(DivIrqReg,0x04);
    WriteRawRC(CommandReg,PCD_IDLE);
    SetBitMask(FIFOLevelReg,0x80);
    for (i=0; i<len; i++)
    {   WriteRawRC(FIFODataReg, *(pIndata+i));   }
    WriteRawRC(CommandReg, PCD_CALCCRC);
    i = 0xFF;
    do 
    {
        n = ReadRawRC(DivIrqReg);
        i--;
    }
    while ((i!=0) && !(n&0x04));
    pOutData[0] = ReadRawRC(CRCResultRegL);
    pOutData[1] = ReadRawRC(CRCResultRegM);
}

//功    能：复位RC522
//返    回: 成功返回MI_OK
char PcdReset(void)
{
    RST_H;
    delay_10ms(1);
    RST_L;
    delay_10ms(1);
    RST_H;
      delay_10ms(10);
    
        if(ReadRawRC(0x02) == 0x80)
        {
        }

    WriteRawRC(CommandReg,PCD_RESETPHASE);
    
    WriteRawRC(ModeReg,0x3D);            //和Mifare卡通讯，CRC初始值0x6363
    WriteRawRC(TReloadRegL,30);           
    WriteRawRC(TReloadRegH,0);
    WriteRawRC(TModeReg,0x8D);
    WriteRawRC(TPrescalerReg,0x3E);
    WriteRawRC(TxAutoReg,0x40);     
    return MI_OK;
}

//设置RC632的工作方式 
char M500PcdConfigISOType(unsigned char type)
{
   if (type == ‘A‘)                     //ISO14443_A
   { 
       ClearBitMask(Status2Reg,0x08);

 /*     WriteRawRC(CommandReg,0x20);    //as default   
       WriteRawRC(ComIEnReg,0x80);     //as default
       WriteRawRC(DivlEnReg,0x0);      //as default
       WriteRawRC(ComIrqReg,0x04);     //as default
       WriteRawRC(DivIrqReg,0x0);      //as default
       WriteRawRC(Status2Reg,0x0);//80    //trun off temperature sensor
       WriteRawRC(WaterLevelReg,0x08); //as default
       WriteRawRC(ControlReg,0x20);    //as default
       WriteRawRC(CollReg,0x80);    //as default
*/
       WriteRawRC(ModeReg,0x3D);//3F
/*     WriteRawRC(TxModeReg,0x0);      //as default???
       WriteRawRC(RxModeReg,0x0);      //as default???
       WriteRawRC(TxControlReg,0x80);  //as default???

       WriteRawRC(TxSelReg,0x10);      //as default???
   */
       WriteRawRC(RxSelReg,0x86);//84
 //      WriteRawRC(RxThresholdReg,0x84);//as default
 //      WriteRawRC(DemodReg,0x4D);      //as default

 //      WriteRawRC(ModWidthReg,0x13);//26
       WriteRawRC(RFCfgReg,0x7F);   //4F
    /*   WriteRawRC(GsNReg,0x88);        //as default???
       WriteRawRC(CWGsCfgReg,0x20);    //as default???
       WriteRawRC(ModGsCfgReg,0x20);   //as default???
*/
       WriteRawRC(TReloadRegL,30);//tmoLength);// TReloadVal = ‘h6a =tmoLength(dec) 
       WriteRawRC(TReloadRegH,0);
       WriteRawRC(TModeReg,0x8D);
       WriteRawRC(TPrescalerReg,0x3E);
       

  //     PcdSetTmo(106);
       delay_10ms(1);
       PcdAntennaOn();
   }
   else{ return (char)-1; }
   
   return MI_OK;
}

//功    能：读RC632寄存器
//参数说明：Address[IN]:寄存器地址
//返    回：读出的值
unsigned char ReadRawRC(unsigned char Address)
{
     unsigned char i, ucAddr;
     unsigned char ucResult=0;

     NSS_L;
     ucAddr = ((Address<<1)&0x7E)|0x80;

     for(i=8;i>0;i--)
     {
         SCK_L;
         if(ucAddr&0x80)
            MOSI_H;
         else
                 MOSI_L;
         SCK_H;
         ucAddr <<= 1;
     }

     for(i=8;i>0;i--)
     {
         SCK_L;
         ucResult <<= 1;
         SCK_H;
         if(READ_MISO == 1)
            ucResult |= 1;
     }

     NSS_H;
     SCK_H;
     return ucResult;
}

//功    能：写RC632寄存器
//参数说明：Address[IN]:寄存器地址
//          value[IN]:写入的值
void WriteRawRC(unsigned char Address, unsigned char value)
{  
    unsigned char i, ucAddr;

    SCK_L;
    NSS_L;
    ucAddr = ((Address<<1)&0x7E);

    for(i=8;i>0;i--)
    {
        if(ucAddr&0x80)
            MOSI_H;
        else
            MOSI_L;
        SCK_H;
        ucAddr <<= 1;
        SCK_L;
    }

    for(i=8;i>0;i--)
    {
        if(value&0x80)
            MOSI_H;
        else
            MOSI_L;
        SCK_H;
        value <<= 1;
        SCK_L;
    }
    NSS_H;
    SCK_H;
}

//功    能：置RC522寄存器位
//参数说明：reg[IN]:寄存器地址
//          mask[IN]:置位值
void SetBitMask(unsigned char reg,unsigned char mask)  
{
    char tmp = 0x0;
    tmp = ReadRawRC(reg);
    WriteRawRC(reg,tmp | mask);  // set bit mask
}

//功    能：清RC522寄存器位
//参数说明：reg[IN]:寄存器地址
//          mask[IN]:清位值
void ClearBitMask(unsigned char reg,unsigned char mask)  
{
    char tmp = 0x0;
    tmp = ReadRawRC(reg);
    WriteRawRC(reg, tmp & ~mask);  // clear bit mask
} 

//功    能：通过RC522和ISO14443卡通讯
//参数说明：Command[IN]:RC522命令字
//          pInData[IN]:通过RC522发送到卡片的数据
//          InLenByte[IN]:发送数据的字节长度
//          pOutData[OUT]:接收到的卡片返回数据
//          *pOutLenBit[OUT]:返回数据的位长度
char PcdComMF522(unsigned char Command, 
                 unsigned char *pInData, 
                 unsigned char InLenByte,
                 unsigned char *pOutData, 
                 unsigned int  *pOutLenBit)
{
    char status = MI_ERR;
    unsigned char irqEn   = 0x00;
    unsigned char waitFor = 0x00;
    unsigned char lastBits;
    unsigned char n;
    unsigned int i;
    switch (Command)
    {
       case PCD_AUTHENT:
          irqEn   = 0x12;
          waitFor = 0x10;
          break;
       case PCD_TRANSCEIVE:
          irqEn   = 0x77;
          waitFor = 0x30;
          break;
       default:
         break;
    }
   
    WriteRawRC(ComIEnReg,irqEn|0x80);
    ClearBitMask(ComIrqReg,0x80);
    WriteRawRC(CommandReg,PCD_IDLE);
    SetBitMask(FIFOLevelReg,0x80);
    
    for (i=0; i<InLenByte; i++)
    {   WriteRawRC(FIFODataReg, pInData[i]);    }
    WriteRawRC(CommandReg, Command);
   
    
    if (Command == PCD_TRANSCEIVE)
    {    SetBitMask(BitFramingReg,0x80);  }
    
//    i = 600;//根据时钟频率调整，操作M1卡最大等待时间25ms
 i = 2000;
    do 
    {
         n = ReadRawRC(ComIrqReg);
         i--;
    }
    while ((i!=0) && !(n&0x01) && !(n&waitFor));
    ClearBitMask(BitFramingReg,0x80);
          
    if (i!=0)
    {    
         if(!(ReadRawRC(ErrorReg)&0x1B))
         {
             status = MI_OK;
             if (n & irqEn & 0x01)
             {   status = MI_NOTAGERR;   }
             if (Command == PCD_TRANSCEIVE)
             {
                n = ReadRawRC(FIFOLevelReg);
                lastBits = ReadRawRC(ControlReg) & 0x07;
                if (lastBits)
                {   *pOutLenBit = (n-1)*8 + lastBits;   }
                else
                {   *pOutLenBit = n*8;   }
                if (n == 0)
                {   n = 1;    }
                if (n > MAXRLEN)
                {   n = MAXRLEN;   }
                for (i=0; i<n; i++)
                {   pOutData[i] = ReadRawRC(FIFODataReg);    }
            }
         }
         else
         {   status = MI_ERR;   }
        
   }
   

   SetBitMask(ControlReg,0x80);           // stop timer now
   WriteRawRC(CommandReg,PCD_IDLE); 
   return status;
}

//开启天线  
//每次启动或关闭天险发射之间应至少有1ms的间隔
void PcdAntennaOn()
{
    unsigned char i;
    i = ReadRawRC(TxControlReg);
    if (!(i & 0x03))
    {
        SetBitMask(TxControlReg, 0x03);
    }
}

//关闭天线
void PcdAntennaOff()
{
    ClearBitMask(TxControlReg, 0x03);
}

//等待卡离开
void WaitCardOff(void)
{
    char          status;
  unsigned char TagType[2];

    while(1)
    {
        status = PcdRequest(REQ_ALL, TagType);
        if(status)
        {
            status = PcdRequest(REQ_ALL, TagType);
            if(status)
            {
                status = PcdRequest(REQ_ALL, TagType);
                if(status)
                {
                    return;
                }
            }
        }
        delay_10ms(10);
    }
}

// Delay 10ms
void delay_10ms(unsigned int _10ms)
{
    unsigned int i, j;

    for(i=0; i<_10ms; i++)
    {
        for(j=0; j<60000; j++);
    }
}

基于Stm32的RFID-RC522模块的对RFID读写使用

标签：count   usr   mos   参数   one   ...   tco   序列   校验   

原文地址：https://www.cnblogs.com/RootChu/p/9475323.html
踩
(0)
赞
(0)
   
举报
评论 一句话评论（0）
登录后才能评论！
分享档案
更多>
2021年07月29日 (22)
2021年07月28日 (40)
2021年07月27日 (32)
2021年07月26日 (79)
2021年07月23日 (29)
2021年07月22日 (30)
2021年07月21日 (42)
2021年07月20日 (16)
2021年07月19日 (90)
2021年07月16日 (35)
周排行
mamicode.com排行更多图片
更多
友情链接
兰亭集智   国之画   百度统计   站长统计   阿里云   chrome插件   新版天听网
关于我们 - 联系我们 - 留言反馈
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码！