标签：imp traceback 源码 read 好用 interface svc 重启 containe
目录
注意：在使用该文档之前，您应该要对k8s的组件有一些了解，我就不描述组件在集群中所担任的角色了, 如有需要请移步官网或其他博客。并且没有使用到证书
CentOS Linux release 7.4.1708 (Core)Kubernetes v1.9.1 （后面提供tar包）
etcd Version: 3.2.18（直接yum 安装）(源码包地址: https://github.com/coreos/etcd/releases)
flanneld Version: 0.7.1（直接yum安装）(源码包地址：https://github.com/coreos/flannel/releases)
docker Version: docker://1.13.1（直接yum安装）master：192.168.1.192 （kube-apiserver, kube-controller-manager, kube-scheduler, etcd, flannel(非必须)）
node1：192.168.1.193 （kubelet, kube-proxy, etcd, flannel）
node2：192.168.1.194 ( kubelet, kube-proxy, etcd, flannel）127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.1.192 master
192.168.1.193 node1
192.168.1.194 node2
# 将这个文件拷贝到所有的节点上（master, node1, node2）systemctl stop firewalld # 注意这里执行后 最好用 firewall-cmd --state再确认一下，如果是Not running表示关闭了
vim /etc/sysconfig/selinux
SELINUX=disabledcd /etc/yum.repos.d/
cat kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
enabled=1
gpgcheck=0
# 清除yum 缓存
yum clean all
# 建立缓存
yum makecacheyum -y install etcd
yum -y install docker# [member]
ETCD_NAME=infra1
ETCD_DATA_DIR="/var/lib/etcd"
ETCD_LISTEN_PEER_URLS="http://192.168.1.192:2380"
ETCD_LISTEN_CLIENT_URLS="http://192.168.1.192:2379"
#[cluster]
ETCD_INITIAL_ADVERTISE_PEER_URLS="http://192.168.1.192:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_ADVERTISE_CLIENT_URLS="http://192.168.1.192:2379"[Unit]
Description=Etcd Server
After=network.target
After=network-online.target
Wants=network-online.target
Documentation=https://github.com/coreos
[Service]
Type=notify
WorkingDirectory=/var/lib/etcd/
EnvironmentFile=-/etc/etcd/etcd.conf
ExecStart=/usr/bin/etcd --name ${ETCD_NAME} --initial-advertise-peer-urls ${ETCD_INITIAL_ADVERTISE_PEER_URLS} --listen-peer-urls ${ETCD_LISTEN_PEER_URLS} --listen-client-urls ${ETCD_LISTEN_CLIENT_URLS},http://127.0.0.1:2379 --advertise-client-urls ${ETCD_ADVERTISE_CLIENT_URLS} --initial-cluster-token ${ETCD_INITIAL_CLUSTER_TOKEN} --initial-cluster infra1=http://192.168.1.192:2380,infra2=http://192.168.1.193:2380,infra3=http://192.168.1.194:2380 --initial-cluster-state new \ # 设置该选项,那么在--initial-cluster中就要指定所有etcd集群成员
--data-dir=${ETCD_DATA_DIR}
Restart=on-failure
RestartSec=5
LimitNOFILE=65536
[Install]
WantedBy=multi-user.targetsystemctl daemon-reload
systemctl enable etcd
systemctl start etcdmkdir -p /root/local/bin && mkdir /etc/kubernetes（master和node上都要执行，下面就直接使用了）
# 将/root/local/bin追加到系统PATH路径后
cat /root/.bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin:/root/local/bin #就是这里啦
export PATHsource /root/.bash_profile
# cd /usr/src
wget https://storage.googleapis.com/kubernetes-release/release/v1.9.1/kubernetes-server-linux-amd64.tar.gz
tar -xf kubernetes-server-linux-amd64.tar.gz
cd kubernetes/server/bin
cp -r kube-apiserver kube-controller-manager kubectl kube-scheduler /root/local/bin配置kube-apiserver
cat /etc/kubernetes/apiserver
###
# kubernetes system config
#
# The following values are used to configure the kube-apiserver
#
# The address on the local server to listen to.
KUBE_API_ADDRESS="--insecure-bind-address=0.0.0.0"
# The port on the local server to listen on.
# KUBE_API_PORT="--port=8080"
# Port minions listen on
# KUBELET_PORT="--kubelet-port=10250"
# Comma separated list of nodes in the etcd cluster
KUBE_ETCD_SERVERS="--etcd-servers=http://192.168.1.192:2379,http://192.168.1.193:2379,http://192.168.1.194:2379"
# Address range to use for services
KUBE_SERVICE_ADDRESSES="--service-cluster-ip-range=10.254.0.0/16"
# default admission control policies
#KUBE_ADMISSION_CONTROL="--admission-control=NamespaceLifecycle,NamespaceExists,LimitRanger,SecurityContextDeny,ServiceAccount,ResourceQuota"
KUBE_ADMISSION_CONTROL="--admission-control=NamespaceLifecycle,NamespaceExists,LimitRanger,SecurityContextDeny,ResourceQuota"
# Add your own!
KUBE_API_ARGS=""cat /etc/kubernetes/config
###
# kubernetes system config
#
# The following values are used to configure various aspects of all
# kubernetes services, including
#
# kube-apiserver.service #请注意到这里的说明，这个文件是所有节点都需要的，所以要分发到所有的节点对应的路径下
# kube-controller-manager.service
# kube-scheduler.service
# kubelet.service
# kube-proxy.service
# logging to stderr means we get it in the systemd journal
KUBE_LOGTOSTDERR="--logtostderr=true"
# journal message level, 0 is debug
KUBE_LOG_LEVEL="--v=0"
# Should this cluster be allowed to run privileged docker containers
KUBE_ALLOW_PRIV="--allow-privileged=false"
# How the controller-manager, scheduler, and proxy find the apiserver
KUBE_MASTER="--master=http://192.168.1.192:8080"cd /usr/lib/systemd/system/
cat kube-apiserver.service
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=network.target
After=etcd.service
[Service]
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/apiserver
ExecStart=/root/local/bin/kube-apiserver $KUBE_LOGTOSTDERR $KUBE_LOG_LEVEL $KUBE_ETCD_SERVERS $KUBE_API_ADDRESS $KUBE_API_PORT $KUBELET_PORT $KUBE_ALLOW_PRIV $KUBE_SERVICE_ADDRESSES $KUBE_ADMISSION_CONTROL $KUBE_API_ARGS
Restart=on-failure
Type=notify
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target配置kube-controller-manager
###
# The following values are used to configure the kubernetes controller-manager
# defaults from config and apiserver should be adequate
# Add your own!
KUBE_CONTROLLER_MANAGER_ARGS=""cat /usr/lib/systemd/system/kube-controller-manager.service
[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
[Service]
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/controller-manager
ExecStart=/root/local/bin/kube-controller-manager $KUBE_LOGTOSTDERR $KUBE_LOG_LEVEL $KUBE_MASTER $KUBE_CONTROLLER_MANAGER_ARGS
Restart=on-failure
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target配置kube-scheduler
###
# kubernetes scheduler config
# default config should be adequate
# Add your own!
#KUBE_SCHEDULER_ARGS="--loglevel=0"
KUBE_SCHEDULER_ARGS="--address=127.0.0.1"[Unit]
Description=Kubernetes Scheduler Plugin
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
[Service]
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/scheduler
ExecStart=/root/local/bin/kube-scheduler $KUBE_LOGTOSTDERR $KUBE_LOG_LEVEL $KUBE_MASTER $KUBE_SCHEDULER_ARGS
Restart=on-failure
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target启动服务
for i in ‘kube-apiserver,kube-controller-manager,kube-scheduler‘
do
systemctl enabld $i
systemctl start $i
done因为没有配置TLS所以我们需要修改一下docker.service文件
[Unit]
Description=Docker Application Container Engine
Documentation=http://docs.docker.com
After=network.target rhel-push-plugin.socket registries.service
Wants=docker-storage-setup.service
Requires=docker-cleanup.timer
[Service]
Type=notify
NotifyAccess=all
EnvironmentFile=-/run/containers/registries.conf
EnvironmentFile=-/etc/sysconfig/docker
EnvironmentFile=-/etc/sysconfig/docker-storage
EnvironmentFile=-/etc/sysconfig/docker-network
Environment=GOTRACEBACK=crash
Environment=DOCKER_HTTP_HOST_COMPAT=1
Environment=PATH=/usr/libexec/docker:/usr/bin:/usr/sbin
ExecStart=/usr/bin/dockerd-current --add-runtime docker-runc=/usr/libexec/docker/docker-runc-current --default-runtime=docker-runc --exec-opt native.cgroupdriver=systemd --userland-proxy-path=/usr/libexec/docker/docker-proxy-current --init-path=/usr/libexec/docker/docker-init-current --seccomp-profile=/etc/docker/seccomp.json --insecure-registry=192.168.1.192:5000 \ # 就是这里啦，来访问该IP:PROT时不用https，node1和node2的docker这里也是需要这样配置，后面就不赘述docker的配置了
$OPTIONS $DOCKER_STORAGE_OPTIONS $DOCKER_NETWORK_OPTIONS $ADD_REGISTRY $BLOCK_REGISTRY $INSECURE_REGISTRY $REGISTRIES
ExecReload=/bin/kill -s HUP $MAINPID
LimitNOFILE=1048576
LimitNPROC=1048576
LimitCORE=infinity
TimeoutStartSec=0
Restart=on-abnormal
KillMode=process
[Install]
WantedBy=multi-user.targetsystemctl enable docker
systemctl start docker[root@master ~]# docker search registry #结果太多就列这么多吧
INDEX NAME DESCRIPTION STARS OFFICIAL AUTOMATED
docker.io docker.io/registry The Docker Registry 2.0 implementation for... 2093 [OK]
docker.io docker.io/konradkleine/docker-registry-frontend Browse and modify your Docker registry in ... 194 [OK]
docker.io docker.io/hyper/docker-registry-web Web UI, authentication service and event r... 140 [OK]
docker.io docker.io/atcol/docker-registry-ui A web UI for easy private/local Docker Reg... 106 [OK]
# 我们直接用第一个
docker pull docker.io/registry
# 查看我们的镜像
docker images
[root@master ~]# docker images
REPOSITORY TAG IMAGE ID CREATED SIZE
docker.io/registry latest b2b03e9146e1 12 days ago 33.3 MB
# 启动registry镜像
mkdir -p /home/belle/docker_registry/
docker run -d -p 5000:5000 -v /home/belle/docker_registry/:/var/lib/registry registry
# 查看在运行的容器
[root@master ~]# docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
e43cd73f7f76 registry "/entrypoint.sh /e..." 5 days ago Restarting (1) 46 seconds ago suspicious_sinoussi
# 下面就是将我们需要的镜像下载下来 然后push到我们的刚刚启动的容器中
# 下载一个之后实验会用到的镜像 hello-world-nginx
# 给docker.io/kitematic/hello-world-nginx 镜像打tag
docker tag docker.io/kitematic/hello-world-nginx 192.168.1.192:5000/hello-world-nginx
# push
The push refers to a repository [192.168.1.192:5000/hello-world-nginx]
5f70bf18a086: Preparing
5f70bf18a086: Preparing
5f70bf18a086: Preparing
b51acdd3ef48: Preparing
3f47ff454588: Preparing
f19fb69b288a: Preparing
b11278aeb507: Preparing
fb85701f3991: Preparing
15235e629864: Preparing
86882fc1175f: Preparing
fb85701f3991: Waiting
15235e629864: Waiting
86882fc1175f: Waiting
9e8c93c7ea7e: Preparing
e66f0ebc2eef: Preparing
6a15a6c08ef6: Preparing
461f75075df2: Preparing
9e8c93c7ea7e: Waiting
e66f0ebc2eef: Waiting
6a15a6c08ef6: Waiting
461f75075df2: Waiting
f19fb69b288a: Layer already exists
b11278aeb507: Layer already exists
fb85701f3991: Layer already exists
15235e629864: Layer already exists
86882fc1175f: Layer already exists
b51acdd3ef48: Layer already exists
3f47ff454588: Layer already exists
5f70bf18a086: Layer already exists
6a15a6c08ef6: Layer already exists
e66f0ebc2eef: Layer already exists
9e8c93c7ea7e: Layer already exists
461f75075df2: Layer already exists
latest: digest: sha256:583f0c9ca89415140fa80f70f8079f5138180a6dda2c3ff3920353b459e061a3 size: 3226
# 这个结果是因为我之前就已经Push过了node1和node2上相似，因为有些地方需要修改ip指向,这里以node1为例
cat /etc/kubernetes/kubeconfig
apiVersion: v1
clusters:
- cluster:
server: http://192.168.1.192:8080
name: myk8s
contexts:
- context:
cluster: myk8s
user: ""
name: myk8s-context
current-context: myk8s-context
kind: Config
preferences: {}
users: []cd /usr/src/kubernetes/server/bin/
scp kubelet kube-proxy root@192.168.1.193:/root/local/bin
scp kubelet kube-proxy root@192.168.1.194:/root/local/bincat /etc/kubernetes/kubelet
###
# kubernetes kubelet (minion) config
# The address for the info server to serve on (set to 0.0.0.0 or "" for all interfaces)
KUBELET_ADDRESS="--address=192.168.1.193"
# The port for the info server to serve on
KUBELET_PORT="--port=10250"
# You may leave this blank to use the actual hostname
KUBELET_HOSTNAME="--hostname-override=node1"
# location of the api-server
##KUBELET_API_SERVER="--api-servers=http://127.0.0.1:8080"
# pod infrastructure container
KUBELET_POD_INFRA_CONTAINER="--pod-infra-container-image=192.168.1.192:5000/pause-amd64"
# Add your own!
KUBELET_ARGS="--cluster-dns=10.254.0.2 --cluster-domain=cluster.local --runtime-cgroups=/systemd/system.slice --kubelet-cgroups=/systemd/system.slice --fail-swap-on=false --cgroup-driver=systemd --kubeconfig=/etc/kubernetes/kubeconfig"注意：KUBELET_ARGS中 一定要指定--cluster-dns --cluster-domain 不然之后创建deployment后 pods永远是containercreating状态，并会报错：Warning MissingClusterDNS 13s (x9 over 12m) kubelet, node2 pod: "nginx-7ff779f954-j4t55_default(7dff9ffa-8afa-11e8-b3ac-000c290991f6)". kubelet does not have ClusterDNS IP configured and cannot create Pod using "ClusterFirst" policy. Falling back to "Default" policy.
如果--cgroup-driver=systemd那么要增加配置--runtime-cgroups=/systemd/system.slice --kubelet-cgroups=/systemd/system.slice
cd /usr/lib/systemcd/system
cat kubelet.service
[Unit]
Description=Kubernetes Kubelet Server
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=docker.service
Requires=docker.service
[Service]
WorkingDirectory=/var/lib/kubelet
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/kubelet
ExecStart=/root/local/bin/kubelet $KUBE_LOGTOSTDERR $KUBE_LOG_LEVEL $KUBELET_API_SERVER $KUBELET_ADDRESS $KUBELET_PORT $KUBELET_HOSTNAME $KUBE_ALLOW_PRIV $KUBELET_ARGS $KUBELET_POD_INFRA_CONTAINER #注意这个参数，之前这里是没有配置的，做实验到创建pods的时候怎么都不成功，结果节点的kubelet报错提示连接google的pause-amd64超时, wtf 我明明配置文件中写的自己的私有镜像，为毛还要去连接google的，所以就直接加到启动参数了。特别提醒：重启后一定要用ps aux | grep kubelet 查看一下里面是否有这个参数()
Restart=on-failure
KillMode=process
[Install]
WantedBy=multi-user.target[Unit]
Description=Kubernetes Kube-Proxy Server
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=network.target
[Service]
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/proxy
ExecStart=/root/local/bin/kube-proxy $KUBE_LOGTOSTDERR $KUBE_LOG_LEVEL $KUBE_MASTER $KUBE_PROXY_ARGS
Restart=on-failure
LimitNOFILE=65536
[Install]
WantedBy=multi-user.targetcat /etc/kubernetes/proxy
###
# kubernetes proxy config
# default config should be adequate
# Add your own!
KUBE_PROXY_ARGS=""flannel我在master，node1，node2上都安装了
yum -y install flannel# Flanneld configuration options
# etcd url location. Point this to the server where etcd runs
FLANNEL_ETCD_ENDPOINTS="http://192.168.1.192:2379,http://192.168.1.193:2379,http://192.168.1.194:2379"
# etcd config key. This is the configuration key that flannel queries
# For address range assignment
FLANNEL_ETCD_PREFIX="/kube-centos/network"
# Any additional options that you want to pass
#FLANNEL_OPTIONS=""mkdir -p /kube-centos/network
[Unit]
Description=Flanneld overlay address etcd agent
After=network.target
After=network-online.target
Wants=network-online.target
After=etcd.service #注意这里
Before=docker.service #注意这里
[Service]
Type=notify
EnvironmentFile=/etc/sysconfig/flanneld
EnvironmentFile=-/etc/sysconfig/docker-network
ExecStart=/usr/bin/flanneld-start $FLANNEL_OPTIONS
ExecStartPost=/usr/libexec/flannel/mk-docker-opts.sh -k DOCKER_NETWORK_OPTIONS -d /run/flannel/docker
Restart=on-failure
[Install]
WantedBy=multi-user.target
WantedBy=docker.service# 在master上执行（任意安装了etcd节点的都可以）
[root@master ~]# mkdir -p /kube-centos/network
[root@master ~]# etcdctl --endpoints=http://192.168.1.192:2379,http://192.168.1.193:2379,http://192.168.1.194:2379 set /kube-centos/network/config ‘{"Network":"172.30.0.0/16","SubnetLen":24,"Backend":{"Type":"vxlan"}}‘systemctl enable flanneld
systemctl start flanneld使用systemctl命令启动flanneld后，会自动执行./mk-docker-opts.sh -i生成如下两个文件环境变量文件
/run/docker_opts.env
Docker将会读取这两个环境变量文件作为容器启动参数。
EnvironmentFile=-/run/flannel/docker
EnvironmentFile=-/run/flannel/subnet.env[Unit]
Description=Docker Application Container Engine
Documentation=http://docs.docker.com
After=network.target rhel-push-plugin.socket registries.service
Wants=docker-storage-setup.service
Requires=docker-cleanup.timer
[Service]
Type=notify
NotifyAccess=all
EnvironmentFile=-/run/containers/registries.conf
EnvironmentFile=-/run/flannel/docker #增加
EnvironmentFile=-/run/flannel/subnet.env #增加
EnvironmentFile=-/etc/sysconfig/docker
EnvironmentFile=-/etc/sysconfig/docker-storage
EnvironmentFile=-/etc/sysconfig/docker-network
Environment=GOTRACEBACK=crash
Environment=DOCKER_HTTP_HOST_COMPAT=1
Environment=PATH=/usr/libexec/docker:/usr/bin:/usr/sbin
ExecStart=/usr/bin/dockerd-current --add-runtime docker-runc=/usr/libexec/docker/docker-runc-current --default-runtime=docker-runc --exec-opt native.cgroupdriver=systemd --userland-proxy-path=/usr/libexec/docker/docker-proxy-current --init-path=/usr/libexec/docker/docker-init-current --seccomp-profile=/etc/docker/seccomp.json --insecure-registry=192.168.1.192:5000 $OPTIONS $DOCKER_STORAGE_OPTIONS $DOCKER_NETWORK_OPTIONS $ADD_REGISTRY $BLOCK_REGISTRY $INSECURE_REGISTRY $REGISTRIES
ExecReload=/bin/kill -s HUP $MAINPID
LimitNOFILE=1048576
LimitNPROC=1048576
LimitCORE=infinity
TimeoutStartSec=0
Restart=on-abnormal
KillMode=process
[Install]
WantedBy=multi-user.targetfor i in ‘etcd flanneld kubelet kube-proxy docoker‘
do
systemctl enable $i
systemctl start $i
done[root@master ~]# export ENDPOINTS=http://192.168.1.192:2379,http://192.168.1.193:2379,http://192.168.1.194:2379
[root@master ~]# etcdctl --endpoints=${ENDPOINTS} ls /kube-centos/network/subnets
/kube-centos/network/subnets/172.30.6.0-24
/kube-centos/network/subnets/172.30.61.0-24
/kube-centos/network/subnets/172.30.67.0-24
[root@master ~]# etcdctl --endpoints=${ENDPOINTS} get /kube-centos/network/config
{"Network":"172.30.0.0/16","SubnetLen":24,"Backend":{"Type":"vxlan"}}
[root@master ~]# etcdctl --endpoints=${ENDPOINTS} get /kube-centos/network/subnets/172.30.6.0-24
{"PublicIP":"192.168.1.192","BackendType":"vxlan","BackendData":{"VtepMAC":"22:e4:55:e3:27:f6"}}
[root@master ~]# etcdctl --endpoints=${ENDPOINTS} get /kube-centos/network/subnets/172.30.61.0-24
{"PublicIP":"192.168.1.193","BackendType":"vxlan","BackendData":{"VtepMAC":"c6:d3:c4:4b:d1:66"}}
[root@master ~]# etcdctl --endpoints=${ENDPOINTS} get /kube-centos/network/subnets/172.30.67.0-24
{"PublicIP":"192.168.1.194","BackendType":"vxlan","BackendData":{"VtepMAC":"12:0c:91:23:08:83"}}
# 如果能看到以上的信息，说明flannel配置成功了在master上执行
[root@master ~]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
node1 Ready <none> 22h v1.9.1 #是ready就OK了
node2 Ready <none> 22h v1.9.1[root@master ~]# kubectl run nginx --replicas=2 --labels="run=load-balancer-example" --image=192.168.1.192:5000/hello-world-nginx --port=80
deployment "nginx" created
[root@master ~]# kubectl expose deployment nginx --type=NodePort --name=example-service
service "example-service" exposed
# 查看一下Pods创建结果
[root@master ~]# kubectl get pods
NAME READY STATUS RESTARTS AGE
nginx-7ff779f954-9sccd 1/1 Running 1 3h #发现已经运行了 注意：这里的READY列是1/1，一个pod中可以有多个容器，而这里的pod中只有一个容器所有是1/1 一对多之后再写一些文档来说明
nginx-7ff779f954-pbps4 1/1 Running 0 17m
# 查看一下pods创建时的一些events
[root@master ~]# kubectl get pods nginx-7ff779f954-pbps4
Name: nginx
Namespace: default
CreationTimestamp: Thu, 19 Jul 2018 14:28:16 +0800
Labels: run=load-balancer-example
Annotations: deployment.kubernetes.io/revision=1
Selector: run=load-balancer-example
Replicas: 2 desired | 2 updated | 2 total | 2 available | 0 unavailable #要注意这里的一些参数,如果desired和available不对等，可能就出了什么问题了
StrategyType: RollingUpdate
MinReadySeconds: 0
RollingUpdateStrategy: 1 max unavailable, 1 max surge
Pod Template:
Labels: run=load-balancer-example
Containers:
nginx:
Image: 192.168.1.192:5000/hello-world-nginx #从我们自建的仓库中拉取
Port: 80/TCP
Environment: <none>
Mounts: <none>
Volumes: <none>
Conditions:
Type Status Reason
---- ------ ------
Available True MinimumReplicasAvailable
OldReplicaSets: <none>
NewReplicaSet: nginx-7ff779f954 (2/2 replicas created)
Events: <none>
Name: nginx-7ff779f954-pbps4
Namespace: default
Node: node1/192.168.1.193 #第一个节点
Start Time: Thu, 19 Jul 2018 17:44:22 +0800
Labels: pod-template-hash=3993359510
run=load-balancer-example
Annotations: <none>
Status: Running
IP: 172.30.6.3
Controlled By: ReplicaSet/nginx-7ff779f954
Containers:
nginx:
Container ID: docker://df7230d3e002c53341fe559851a4d913b77aa9bff0f2d21c656ad1ed6f0bb86d
Image: 192.168.1.192:5000/hello-world-nginx
Image ID: docker-pullable://192.168.1.192:5000/hello-world-nginx@sha256:583f0c9ca89415140fa80f70f8079f5138180a6dda2c3ff3920353b459e061a3
Port: 80/TCP
State: Running
Started: Thu, 19 Jul 2018 17:45:55 +0800
Ready: True
Restart Count: 0
Environment: <none>
Mounts: <none>
Conditions:
Type Status
Initialized True
Ready True
PodScheduled True
Volumes: <none>
QoS Class: BestEffort
Node-Selectors: <none>
Tolerations: <none>
Events:
Type Reason Age From Message
---- ------ ---- ---- -------
Normal Scheduled 21m default-scheduler Successfully assigned nginx-7ff779f954-pbps4 to node1
Normal Pulling 19m (x4 over 21m) kubelet, node1 pulling image "192.168.1.192:5000/hello-world-nginx" # 成功拉取
Normal Pulled 19m kubelet, node1 Successfully pulled image "192.168.1.192:5000/hello-world-nginx"
Normal Created 19m kubelet, node1 Created container # 已经创建
Normal Started 19m kubelet, node1 Started container
# 查看一下端口情况
[root@master ~]# kubectl describe svc example-service
Name: example-service
Namespace: default
Labels: run=load-balancer-example
Annotations: <none>
Selector: run=load-balancer-example
Type: NodePort
IP: 10.254.72.252
Port: <unset> 80/TCP
TargetPort: 80/TCP
NodePort: <unset> 30782/TCP #下面我们使用这个端口访问以下
Endpoints: 172.30.6.2:80,172.30.6.3:80
Session Affinity: None
External Traffic Policy: Cluster
Events: <none>
# 下面还是在任意Node上执行的
[root@node1 ~]# netstat -tlunp | grep 30782
tcp6 1 0 :::30782 :::* LISTEN 38917/kube-proxy #会发现node上已经监听了NodePort所指定的端口了
[root@node1 ~]# docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
df7230d3e002 192.168.1.192:5000/hello-world-nginx@sha256:583f0c9ca89415140fa80f70f8079f5138180a6dda2c3ff3920353b459e061a3 "sh /start.sh" 17 hours ago Up 17 hours k8s_nginx_nginx-7ff779f954-pbps4_default_50953118-8b38-11e8-b3ac-000c290991f6_0
b5e225cd6abf 192.168.1.192:5000/pause-amd64 "/pause" 17 hours ago Up 17 hours k8s_POD_nginx-7ff779f954-pbps4_default_50953118-8b38-11e8-b3ac-000c290991f6_0
# 可以看到有两个容器在运行，一个是pod 一个是真正提供服务的hello-world-nginx可以看到我们通过node的ip可以访问到我们容器里的内容的，我们想要的结果是一个容器宕掉之后马上又能重启一个继续提供访问，所以我们这里就直接删除一个pod
# 从上面得我们有两个pods 分别是nginx-7ff779f954-9sccd 和 nginx-7ff779f954-pbps4
# 我们现在删除nginx-7ff779f954-9sccd pod
[root@master ~]# kubectl delete pod nginx-7ff779f954-9sccd
pod "nginx-7ff779f954-9sccd" deleted
[root@master ~]# kubectl get pods #会发现有自动创建了一个nginx-7ff779f954-clxf9 并且两个IP依然能够正常访问
NAME READY STATUS RESTARTS AGE
nginx-7ff779f954-clxf9 1/1 Running 0 4m
nginx-7ff779f954-pbps4 1/1 Running 0 34m这次实验就到这里吧，这次各个组件的配置都比较简单，而且没有用到证书，所以就仅供"观赏"了。后面随着知识了解的深入会加一些优化配置在里面。
[root@node1 ~]# docker stop df7230
df7230
[root@node1 ~]# docker ps # 再次查看容器启动的情况 发现有新的容器b06f2d805a8e已经产生
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
b06f2d805a8e 192.168.1.192:5000/hello-world-nginx@sha256:583f0c9ca89415140fa80f70f8079f5138180a6dda2c3ff3920353b459e061a3 "sh /start.sh" About an hour ago Up About an hour k8s_nginx_nginx-7ff779f954-pbps4_default_50953118-8b38-11e8-b3ac-000c290991f6_1
b5e225cd6abf 192.168.1.192:5000/pause-amd64 "/pause" 20 hours ago Up 20 hours
[root@node1 ~]# journalctl -f -t kubelet # 查看一下kubelet的日志信息（截取了一部分）
Jul 20 11:50:02 node1 kubelet[58163]: I0720 11:50:02.811077 58163 kuberuntime_manager.go:514] Container {Name:nginx Image:192.168.1.192:5000/hello-world-nginx Command:[] Args:[] WorkingDir: Ports:[{Name: HostPort:0 ContainerPort:80 Protocol:TCP HostIP:}] EnvFrom:[] Env:[] Resources:{Limits:map[] Requests:map[]} VolumeMounts:[] VolumeDevices:[] LivenessProbe:nil ReadinessProbe:nil Lifecycle:nil TerminationMessagePath:/dev/termination-log TerminationMessagePolicy:File ImagePullPolicy:Always SecurityContext:nil Stdin:false StdinOnce:false TTY:false} is dead, but RestartPolicy says that we should restart it. # 这里就是stop后 发生的restart信息事件了（但有个问题是，虽然恢复了但是却花了好几分钟才恢复。。。）
Jul 20 11:50:02 node1 kubelet[58163]: I0720 11:50:02.811330 58163 kuberuntime_manager.go:758] checking backoff for container "nginx" in pod "nginx-7ff779f954-pbps4_default(50953118-8b38-11e8-b3ac-000c290991f6)"这实验真是熬人。。 当我知道还有kubeadmin和minikube这样的工具可以安装集群是整个人几乎是崩溃的，不过自己从头到尾搭建一次对k8s的整个流程和模块之间的关系会更加的了解，也有利于之后的一些插件的添加，期待下一篇kube-dns的诞生。。。。
标签：imp traceback 源码 read 好用 interface svc 重启 containe
原文地址：https://www.cnblogs.com/zunwen/p/9497690.html
