标签：sts 分享 dial json 执行文件 ssi 防火 执行命令 user
参考文档:4.1
下载和分发二进制安装包
[root@k8s-master kubernetes]# wget https://github.com/coreos/etcd/releases/download/v3.3.7/etcd-v3.3.7-linux-amd64.tar.gz
[root@k8s-master kubernetes]# ls
etcd-v3.3.7-linux-amd64.tar.gz? kubernetes? kubernetes-client-linux-amd64.tar.gz? kubernetes-src.tar.gz
[root@k8s-master kubernetes]#
[root@k8s-master kubernetes]# tar zxvf etcd-v3.3.7-linux-amd64.tar.gz
[root@k8s-master kubernetes]# ls
etcd-v3.3.7-linux-amd64?分发到所有节点
[root@k8s-master kubernetes]# cp etcd-v3.3.7-linux-amd64/etcd* /opt/k8s/bin
[root@k8s-master kubernetes]# scp etcd-v3.3.7-linux-amd64/etcd* root@k8s-node1:/opt/k8s/bin
etcd? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 100%?? 18MB? 91.6MB/s?? 00:00? ?
etcdctl? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? 100%?? 15MB? 96.1MB/s?? 00:00? ?
[root@k8s-master kubernetes]# scp etcd-v3.3.7-linux-amd64/etcd* root@k8s-node2:/opt/k8s/bin
etcd? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 100%?? 18MB? 92.2MB/s?? 00:00? ?
etcdctl? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? 100%?? 15MB? 92.3MB/s?? 00:00? ?
[root@k8s-master kubernetes]#4.2
创建etcd证书和私钥
创建证书签名请求
[root@k8s-master etcd]# cat etcd-csr.json
{
"CN": "etcd",
"hosts": [
"127.0.0.1",
"192.168.1.92",
"192.168.1.93",
"192.168.1.95"
],
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "SZ",
"L": "SZ",
"O": "k8s",
"OU": "4Paradigm"
}
]
}
[root@k8s-master etcd]#hosts 字段指定授权使用该证书的 etcd 节点 IP 或域名列表，这里将 etcd 集群的三
个节点 IP 都列在其中
生成证书和私钥
[root@k8s-master etcd]# cfssl gencert -ca=/etc/kubernetes/cert/ca.pem -ca-key=/etc/kubernetes/cert/ca-key.pem -config=/etc/kubernetes/cert/ca-config.json -profile=kubernetes etcd-csr.json | cfssljson -bare etcd
[root@k8s-master etcd]# ls
etcd.csr? etcd-csr.json? etcd-key.pem? etcd.pem
[root@k8s-master etcd]#分发证书和私钥到节点
[root@k8s-master etcd]# cp etcd* /etc/etcd/cert/
[root@k8s-master etcd]# scp etcd* root@k8s-node1:/etc/etcd/cert/
etcd.csr? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 100% 1054? ?? 1.5MB/s?? 00:00? ?
etcd-csr.json? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? 100%? 213?? 350.8KB/s?? 00:00? ?
etcd-key.pem? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 100% 1679? ?? 2.5MB/s?? 00:00? ?
etcd.pem? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 100% 1415? ?? 2.3MB/s?? 00:00? ?
[root@k8s-master etcd]# scp etcd* root@k8s-node2:/etc/etcd/cert/
etcd.csr? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 100% 1054? ?? 1.2MB/s?? 00:00? ?
etcd-csr.json? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? 100%? 213?? 296.9KB/s?? 00:00? ?
etcd-key.pem? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 100% 1679? ?? 2.6MB/s?? 00:00? ?
etcd.pem? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 100% 1415? ?? 2.5MB/s?? 00:00? ?
[root@k8s-master etcd]#4.3
创建etcd的systemd unit模块文件
注意： \ 这个符号需改成\?
[root@k8s-master etcd]# cat etcd.service.template
[Unit]
Description=Etcd Server
After=network.target
After=network-online.target
Wants=network-online.target
Documentation=https://github.com/coreos
[Service]
User=k8s
Type=notify
WorkingDirectory=/var/lib/etcd/
ExecStart=/opt/k8s/bin/etcd \--data-dir=/var/lib/etcd \--name=##NODE_NAME## \--cert-file=/etc/etcd/cert/etcd.pem \--key-file=/etc/etcd/cert/etcd-key.pem \--trusted-ca-file=/etc/kubernetes/cert/ca.pem \--peer-cert-file=/etc/etcd/cert/etcd.pem \--peer-key-file=/etc/etcd/cert/etcd-key.pem \--peer-trusted-ca-file=/etc/kubernetes/cert/ca.pem \--peer-client-cert-auth \--client-cert-auth \--listen-peer-urls=https://##NODE_IP##:2380 \--initial-advertise-peer-urls=https://##NODE_IP##:2380 \--listen-client-urls=https://##NODE_IP##:2379,http://127.0.0.1:2379
\--advertise-client-urls=https://##NODE_IP##:2379 \--initial-cluster-token=etcd-cluster-0 \--initial-cluster=${ETCD_NODES} \--initial-cluster-state=new
Restart=on-failure
RestartSec=5
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target
[root@k8s-master etcd]#User ：指定以 k8s 账户运行；
WorkingDirectory 、 --data-dir ：指定工作目录和数据目录为
/var/lib/etcd ，需在启动服务前创建这个目录；
--name ：指定节点名称，当 --initial-cluster-state 值为 new 时， --
name 的参数值必须位于 --initial-cluster 列表中；
--cert-file 、 --key-file ：etcd server 与 client 通信时使用的证书和私钥；
--trusted-ca-file ：签名 client 证书的 CA 证书，用于验证 client 证书；
--peer-cert-file 、 --peer-key-file ：etcd 与 peer 通信使用的证书和私
钥；
--peer-trusted-ca-file ：签名 peer 证书的 CA 证书，用于验证 peer 证书；
分发生成的 systemd unit 文件,并修改好各节点配置文件里的##NODE_NAME##和##NODE_IP##
[root@k8s-master etcd]# cp etcd.service.template /etc/systemd/system/etcd.service
[root@k8s-master etcd]# scp etcd.service.template root@k8s-node1:/etc/systemd/system/etcd.service
etcd.service.template? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? 100% 1038? ?? 1.1MB/s?? 00:00? ?
[root@k8s-master etcd]# scp etcd.service.template root@k8s-node2:/etc/systemd/system/etcd.service
etcd.service.template? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? 100% 1038? ?? 1.2MB/s?? 00:00? ?
[root@k8s-master etcd]###各个节点修改下
4.4
启动etcd
[root@k8s-master ~]# systemctl daemon-reload && systemctl enable etcd && systemctl restart etcd启动报错
Aug 20 16:40:29 k8s-master systemd: etcd.service holdoff time over, scheduling restart.
Aug 20 16:40:29 k8s-master systemd: Starting Etcd Server...
Aug 20 16:40:29 k8s-master etcd: etcd Version: 3.3.7
Aug 20 16:40:29 k8s-master etcd: Git SHA: 56536de55
Aug 20 16:40:29 k8s-master etcd: Go Version: go1.9.6
Aug 20 16:40:29 k8s-master etcd: Go OS/Arch: linux/amd64
Aug 20 16:40:29 k8s-master etcd: setting maximum number of CPUs to 1, total number of available CPUs is 1
Aug 20 16:40:29 k8s-master etcd: peerTLS: cert = /etc/etcd/cert/etcd.pem, key = /etc/etcd/cert/etcd-key.pem, ca = , trusted-ca = /etc/kubernetes/cert/ca.pem, client-cert-auth = true, crl-file =
Aug 20 16:40:29 k8s-master etcd: open /etc/etcd/cert/etcd-key.pem: permission denied
Aug 20 16:40:29 k8s-master systemd: etcd.service: main process exited, code=exited, status=1/FAILURE
Aug 20 16:40:29 k8s-master systemd: Failed to start Etcd Server.
Aug 20 16:40:29 k8s-master systemd: Unit etcd.service entered failed state.
Aug 20 16:40:29 k8s-master systemd: etcd.service failed.
[root@k8s-master ~]#明显 ?/etc/etcd/cert/etcd-key.pem: permission denied ?没有权限
[root@k8s-master cert]# pwd
/etc/etcd/cert
[root@k8s-master cert]# ll
总用量 16
-rw-r--r-- 1 root root 1054 8月? 20 15:39 etcd.csr
-rw-r--r-- 1 root root? 213 8月? 20 15:39 etcd-csr.json
-rw------- 1 root root 1679 8月? 20 15:39 etcd-key.pem
-rw-r--r-- 1 root root 1415 8月? 20 15:39 etcd.pem
[root@k8s-master cert]#我们启用启动etcd的用户是k8s，而且这里没有x的权限。
修改权限设置
[root@k8s-master etc]# chown -R k8s /etc/etcd/cert/
[root@k8s-master cert]# chmod +x -R /etc/etcd/cert/
[root@k8s-master cert]# ll
总用量 16
-rwxr-xr-x 1 k8s root 1054 8月? 20 15:39 etcd.csr
-rwxr-xr-x 1 k8s root? 213 8月? 20 15:39 etcd-csr.json
-rwx--x--x 1 k8s root 1679 8月? 20 15:39 etcd-key.pem
-rwxr-xr-x 1 k8s root 1415 8月? 20 15:39 etcd.pem/etc/kubernetes/cert/?权限也不对
[root@k8s-master cert]# cd /etc/kubernetes/cert/
[root@k8s-master cert]# ll
总用量 20
-rw-r--r-- 1 root root? 292 8月? 16 16:05 ca-config.json
-rw-r--r-- 1 root root? 993 8月? 16 16:05 ca.csr
-rw-r--r-- 1 root root? 201 8月? 16 16:05 ca-csr.json
-rw------- 1 root root 1675 8月? 16 16:05 ca-key.pem
-rw-r--r-- 1 root root 1338 8月? 16 16:05 ca.pem
[root@k8s-master kubernetes]# chown -R k8s /etc/kubernetes/cert/
[root@k8s-master kubernetes]# chmod -R +x /etc/kubernetes/cert正常启动的配置文件，见下:
[root@k8s-master cert]# cat /etc/systemd/system/etcd.service
[Unit]
Description=Etcd Server
After=network.target
After=network-online.target
Wants=network-online.target
Documentation=https:\github.com/coreos
[Service]
User=k8s
Type=notify
WorkingDirectory=/var/lib/etcd/
ExecStart=/opt/k8s/bin/etcd --data-dir=/var/lib/etcd --name=k8s-master --cert-file=/etc/etcd/cert/etcd.pem --key-file=/etc/etcd/cert/etcd-key.pem --trusted-ca-file=/etc/kubernetes/cert/ca.pem --peer-cert-file=/etc/etcd/cert/etcd.pem --peer-key-file=/etc/etcd/cert/etcd-key.pem --peer-trusted-ca-file=/etc/kubernetes/cert/ca.pem --peer-client-cert-auth --client-cert-auth --listen-peer-urls=https://192.168.1.92:2380 --initial-advertise-peer-urls=https://192.168.1.92:2380 --listen-client-urls=https://192.168.1.92:2379,http://127.0.0.1:2379 --advertise-client-urls=https://192.168.1.92:2379 --initial-cluster-token=etcd-cluster-0 --initial-cluster=k8s-master=https://192.168.1.92:2380,k8s-node1=https://192.168.1.93:2380,k8s-node2=https://192.168.1.95:2380 --initial-cluster-state=new
Restart=on-failure
RestartSec=5
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target
[root@k8s-master cert]#4.5
验证etcd集群
报错:
[root@k8s-master ~]# etcdctl cluster-health
failed to check the health of member 64fe8a986fbba907 on https://192.168.1.95:2379: Get https://192.168.1.95:2379/health: dial tcp 192.168.1.95:2379: getsockopt: no route to host
member 64fe8a986fbba907 is unreachable: [https://192.168.1.95:2379] are all unreachable
failed to check the health of member 9eddf87b04c89943 on https://192.168.1.93:2379: Get https://192.168.1.93:2379/health: dial tcp 192.168.1.93:2379: getsockopt: no route to host
member 9eddf87b04c89943 is unreachable: [https://192.168.1.93:2379] are all unreachable
failed to check the health of member d71352a6aad35c57 on https://192.168.1.92:2379: Get https://192.168.1.92:2379/health: x509: certificate signed by unknown authority
member d71352a6aad35c57 is unreachable: [https://192.168.1.92:2379] are all unreachable
cluster is unavailable
[root@k8s-master ~]#[root@k8s-master ~]# etcdctl member list
client: etcd cluster is unavailable or misconfigured; error #0: client: endpoint https://192.168.1.95:2379 exceeded header timeout
; error #1: client: endpoint https://192.168.1.93:2379 exceeded header timeout
; error #2: x509: certificate signed by unknown authority
[root@k8s-master ~]#logs
[root@k8s-master ~]# cat /var/log/messages
Aug 20 18:06:36 k8s-master etcd: health check for peer 64fe8a986fbba907 could not connect: dial tcp 192.168.1.95:2380: getsockopt: no route to host
Aug 20 18:06:36 k8s-master etcd: health check for peer 9eddf87b04c89943 could not connect: dial tcp 192.168.1.93:2380: getsockopt: no route to host
Aug 20 18:06:36 k8s-master etcd: failed to reach the peerURL(https://192.168.1.95:2380) of member 64fe8a986fbba907 (Get https://192.168.1.95:2380/version: dial tcp 192.168.1.95:2380: getsockopt: no route to host)
Aug 20 18:06:36 k8s-master etcd: cannot get the version of member 64fe8a986fbba907 (Get https://192.168.1.95:2380/version: dial tcp 192.168.1.95:2380: getsockopt: no route to host)
Aug 20 18:06:36 k8s-master etcd: failed to reach the peerURL(https://192.168.1.93:2380) of member 9eddf87b04c89943 (Get https://192.168.1.93:2380/version: dial tcp 192.168.1.93:2380: getsockopt: no route to host)
Aug 20 18:06:36 k8s-master etcd: cannot get the version of member 9eddf87b04c89943 (Get https://192.168.1.93:2380/version: dial tcp 192.168.1.93:2380: getsockopt: no route to host)
Aug 20 18:06:39 k8s-master etcd: rejected connection from "192.168.1.92:50868" (error "remote error: tls: bad certificate", ServerName "")
Aug 20 18:06:40 k8s-master etcd: failed to reach the peerURL(https://192.168.1.95:2380) of member 64fe8a986fbba907 (Get https://192.168.1.95:2380/version: dial tcp 192.168.1.95:2380: getsockopt: no route to host)
Aug 20 18:06:40 k8s-master etcd: cannot get the version of member 64fe8a986fbba907 (Get https://192.168.1.95:2380/version: dial tcp 192.168.1.95:2380: getsockopt: no route to host)
Aug 20 18:06:40 k8s-master etcd: failed to reach the peerURL(https://192.168.1.93:2380) of member 9eddf87b04c89943 (Get https://192.168.1.93:2380/version: dial tcp 192.168.1.93:2380: getsockopt: no route to host)
Aug 20 18:06:40 k8s-master etcd: cannot get the version of member 9eddf87b04c89943 (Get https://192.168.1.93:2380/version: dial tcp 192.168.1.93:2380: getsockopt: no route to host)
Aug 20 18:06:41 k8s-master etcd: health check for peer 64fe8a986fbba907 could not connect: dial tcp 192.168.1.95:2380: getsockopt: no route to host
Aug 20 18:06:41 k8s-master etcd: health check for peer 9eddf87b04c89943 could not connect: dial tcp 192.168.1.93:2380: getsockopt: no route to host
Aug 20 18:06:42 k8s-master etcd: rejected connection from "192.168.1.92:50902" (error "remote error: tls: bad certificate", ServerName "")
Aug 20 18:06:44 k8s-master etcd: failed to reach the peerURL(https://192.168.1.95:2380) of member 64fe8a986fbba907 (Get https://192.168.1.95:2380/version: dial tcp 192.168.1.95:2380: getsockopt: no route to host)
Aug 20 18:06:44 k8s-master etcd: cannot get the version of member 64fe8a986fbba907 (Get https://192.168.1.95:2380/version: dial tcp 192.168.1.95:2380: getsockopt: no route to host)
[root@k8s-master ~]#分析思路:
出问题的可能性：
配置文件配置出错
证书
网络
防火墙屏蔽了端口
一个个来测试
用telnet检查发现2379和2380，防火墙没有关闭。
关闭防火墙再测试，还是报错:
Aug 21 09:04:02 k8s-node1 etcd: rejected connection from "192.168.1.92:36138" (error "remote error: tls: bad certificate", ServerName "")
Aug 21 09:04:19 k8s-node1 etcd: rejected connection from "192.168.1.93:51698" (error "remote error: tls: bad certificate", ServerName "")
[root@k8s-master ~]# etcdctl cluster-health
failed to check the health of member 64fe8a986fbba907 on https://192.168.1.95:2379: Get https://192.168.1.95:2379/health: x509: certificate signed by unknown authority
member 64fe8a986fbba907 is unreachable: [https://192.168.1.95:2379] are all unreachable
failed to check the health of member 9eddf87b04c89943 on https://192.168.1.93:2379: Get https://192.168.1.93:2379/health: x509: certificate signed by unknown authority
member 9eddf87b04c89943 is unreachable: [https://192.168.1.93:2379] are all unreachable
failed to check the health of member d71352a6aad35c57 on https://192.168.1.92:2379: Get https://192.168.1.92:2379/health: x509: certificate signed by unknown authority
member d71352a6aad35c57 is unreachable: [https://192.168.1.92:2379] are all unreachable
cluster is unavailable这个报错应该是证书的问题了
找资料发现，如果不带证书测试就是报这个错误，带证书后，测试正常，见下：
[root@k8s-master cert]# etcdctl --ca-file=/etc/kubernetes/cert/ca.pem --cert-file=/etc/etcd/cert/etcd.pem --key-file=/etc/etcd/cert/etcd-key.pem --endpoints=https://192.168.1.92:2379,https://192.168.1.93:2379,https://192.168.1.95:2379 cluster-health
member 64fe8a986fbba907 is healthy: got healthy result from https://192.168.1.95:2379
member 9eddf87b04c89943 is healthy: got healthy result from https://192.168.1.93:2379
member d71352a6aad35c57 is healthy: got healthy result from https://192.168.1.92:2379
cluster is healthy
[root@k8s-master cert]#[root@k8s-node2 ~]# etcdctl? --ca-file=/etc/kubernetes/cert/ca.pem --cert-file=/etc/etcd/cert/etcd.pem --key-file=/etc/etcd/cert/etcd-key.pem --endpoints=https://192.168.1.92:2379,https://192.168.1.93:2379,https://192.168.1.95:2379? member list
64fe8a986fbba907: name=k8s-node2 peerURLs=https://192.168.1.95:2380 clientURLs=https://192.168.1.95:2379 isLeader=true
9eddf87b04c89943: name=k8s-node1 peerURLs=https://192.168.1.93:2380 clientURLs=https://192.168.1.93:2379 isLeader=false
d71352a6aad35c57: name=k8s-master peerURLs=https://192.168.1.92:2380 clientURLs=https://192.168.1.92:2379 isLeader=false
[root@k8s-node2 ~]#执行命令看看
master创建
[root@k8s-master cert]# etcdctl --ca-file=/etc/kubernetes/cert/ca.pem --cert-file=/etc/etcd/cert/etcd.pem --key-file=/etc/etcd/cert/etcd-key.pem mkdir test
[root@k8s-master cert]# etcdctl --ca-file=/etc/kubernetes/cert/ca.pem --cert-file=/etc/etcd/cert/etcd.pem --key-file=/etc/etcd/cert/etcd-key.pem mkdir ls
[root@k8s-master cert]# etcdctl --ca-file=/etc/kubernetes/cert/ca.pem --cert-file=/etc/etcd/cert/etcd.pem --key-file=/etc/etcd/cert/etcd-key.pem? ls
/test
/lsnode2检索
[root@k8s-master cert]# etcdctl --ca-file=/etc/kubernetes/cert/ca.pem --cert-file=/etc/etcd/cert/etcd.pem --key-file=/etc/etcd/cert/etcd-key.pem mkdir test
[root@k8s-master cert]# etcdctl --ca-file=/etc/kubernetes/cert/ca.pem --cert-file=/etc/etcd/cert/etcd.pem --key-file=/etc/etcd/cert/etcd-key.pem mkdir ls
[root@k8s-master cert]# etcdctl --ca-file=/etc/kubernetes/cert/ca.pem --cert-file=/etc/etcd/cert/etcd.pem --key-file=/etc/etcd/cert/etcd-key.pem? ls
/test
/ls数据同步了
4.6
执行文件的属主和有没有执行x的权限，请小心对比检查。
标签：sts 分享 dial json 执行文件 ssi 防火 执行命令 user
原文地址：http://blog.51cto.com/goome/2164781
