码迷，mamicode.com
首页 > 其他好文 > 详细

HyperLedger Fabric 1.2 多机多节点部署（10.3）

时间：2018-09-01 21:51:53      阅读：339      评论：0      收藏：0      [点我收藏+]

标签：listen   deb   err   docke   different   volume   maximum   ase   ges   

        多机多节点指在多台电脑上部署多个组织和节点，本案例部署一个排序（orderer）服务，两个组织（org1，org2）和四个节点（peer）,每个组织包括两个节点，需要五台计算机，计算机配置如下：


技术分享图片


多机多节点部署结构图如下：

技术分享图片


图：多机多节点部署结构图


多机多节点部署（1个orderer+4个peer）步骤如下：
10.3.1 部署orderer.example.com
1. 创建multipeer目录

# cd $GOPATH/src/github.com/hyperledger/fabric
# mkdir multipeer
# cd multipeer

 2. 获取生成工具

把下载的hyperledger-fabric-linux-amd64-1.2.0.tar.gz二进制文件包解压，把其中的bin目录拷贝到multipeer目录下。

# chmod -R 777 ./bin

 3. 准备生成证书和区块配置文件

    配置crypto-config.yaml和configtx.yaml文件，拷贝到multipeer目录下。
4. 生成公私钥和证书

  • crypto-config.yaml：
# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#

# ---------------------------------------------------------------------------
# "OrdererOrgs" - Definition of organizations managing orderer nodes
# ---------------------------------------------------------------------------
OrdererOrgs:
  # ---------------------------------------------------------------------------
  # Orderer
  # ---------------------------------------------------------------------------
  - Name: Orderer
    Domain: example.com
    CA:
        Country: US
        Province: California
        Locality: San Francisco
    # ---------------------------------------------------------------------------
    # "Specs" - See PeerOrgs below for complete description
    # ---------------------------------------------------------------------------
    Specs:
      - Hostname: orderer
# ---------------------------------------------------------------------------
# "PeerOrgs" - Definition of organizations managing peer nodes
# ---------------------------------------------------------------------------
PeerOrgs:
  # ---------------------------------------------------------------------------
  # Org1
  # ---------------------------------------------------------------------------
  - Name: Org1
    Domain: org1.example.com
    EnableNodeOUs: true
    CA:
        Country: US
        Province: California
        Locality: San Francisco
    # ---------------------------------------------------------------------------
    # "Specs"
    # ---------------------------------------------------------------------------
    # Uncomment this section to enable the explicit definition of hosts in your
    # configuration.  Most users will want to use Template, below
    #
    # Specs is an array of Spec entries.  Each Spec entry consists of two fields:
    #   - Hostname:   (Required) The desired hostname, sans the domain.
    #   - CommonName: (Optional) Specifies the template or explicit override for
    #                 the CN.  By default, this is the template:
    #
    #                              "{{.Hostname}}.{{.Domain}}"
    #
    #                 which obtains its values from the Spec.Hostname and
    #                 Org.Domain, respectively.
    # ---------------------------------------------------------------------------
    # Specs:
    #   - Hostname: foo # implicitly "foo.org1.example.com"
    #     CommonName: foo27.org5.example.com # overrides Hostname-based FQDN set above
    #   - Hostname: bar
    #   - Hostname: baz
    # ---------------------------------------------------------------------------
    # "Template"
    # ---------------------------------------------------------------------------
    # Allows for the definition of 1 or more hosts that are created sequentially
    # from a template. By default, this looks like "peer%d" from 0 to Count-1.
    # You may override the number of nodes (Count), the starting index (Start)
    # or the template used to construct the name (Hostname).
    #
    # Note: Template and Specs are not mutually exclusive.  You may define both
    # sections and the aggregate nodes will be created for you.  Take care with
    # name collisions
    # ---------------------------------------------------------------------------
    Template:
      Count: 2
      # Start: 5
      # Hostname: {{.Prefix}}{{.Index}} # default
    # ---------------------------------------------------------------------------
    # "Users"
    # ---------------------------------------------------------------------------
    # Count: The number of user accounts _in addition_ to Admin
    # ---------------------------------------------------------------------------
    Users:
      Count: 1
  # ---------------------------------------------------------------------------
  # Org2: See "Org1" for full specification
  # ---------------------------------------------------------------------------
  - Name: Org2
    Domain: org2.example.com
    EnableNodeOUs: true
    CA:
        Country: US
        Province: California
        Locality: San Francisco
    Template:
      Count: 2
    Users:
      Count: 1
  • configtx.yaml：
# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#

---
################################################################################
#
#   Section: Organizations
#
#   - This section defines the different organizational identities which will
#   be referenced later in the configuration.
#
################################################################################
Organizations:

    # SampleOrg defines an MSP using the sampleconfig.  It should never be used
    # in production but may be used as a template for other definitions
    - &OrdererOrg
        # DefaultOrg defines the organization which is used in the sampleconfig
        # of the fabric.git development environment
        Name: OrdererOrg

        # ID to load the MSP definition as
        ID: OrdererMSP

        # MSPDir is the filesystem path which contains the MSP configuration
        MSPDir: crypto-config/ordererOrganizations/example.com/msp

        # Policies defines the set of policies at this level of the config tree
        # For organization policies, their canonical path is usually
        #   /Channel/<Application|Orderer>/<OrgName>/<PolicyName>
        Policies:
            Readers:
                Type: Signature
                Rule: "OR(‘OrdererMSP.member‘)"
            Writers:
                Type: Signature
                Rule: "OR(‘OrdererMSP.member‘)"
            Admins:
                Type: Signature
                Rule: "OR(‘OrdererMSP.admin‘)"

    - &Org1
        # DefaultOrg defines the organization which is used in the sampleconfig
        # of the fabric.git development environment
        Name: Org1MSP

        # ID to load the MSP definition as
        ID: Org1MSP

        MSPDir: crypto-config/peerOrganizations/org1.example.com/msp

        # Policies defines the set of policies at this level of the config tree
        # For organization policies, their canonical path is usually
        #   /Channel/<Application|Orderer>/<OrgName>/<PolicyName>
        Policies:
            Readers:
                Type: Signature
                Rule: "OR(‘Org1MSP.admin‘, ‘Org1MSP.peer‘, ‘Org1MSP.client‘)"
            Writers:
                Type: Signature
                Rule: "OR(‘Org1MSP.admin‘, ‘Org1MSP.client‘)"
            Admins:
                Type: Signature
                Rule: "OR(‘Org1MSP.admin‘)"

        AnchorPeers:
            # AnchorPeers defines the location of peers which can be used
            # for cross org gossip communication.  Note, this value is only
            # encoded in the genesis block in the Application section context
            - Host: peer0.org1.example.com
              Port: 7051

    - &Org2
        # DefaultOrg defines the organization which is used in the sampleconfig
        # of the fabric.git development environment
        Name: Org2MSP

        # ID to load the MSP definition as
        ID: Org2MSP

        MSPDir: crypto-config/peerOrganizations/org2.example.com/msp

        # Policies defines the set of policies at this level of the config tree
        # For organization policies, their canonical path is usually
        #   /Channel/<Application|Orderer>/<OrgName>/<PolicyName>
        Policies:
            Readers:
                Type: Signature
                Rule: "OR(‘Org2MSP.admin‘, ‘Org2MSP.peer‘, ‘Org2MSP.client‘)"
            Writers:
                Type: Signature
                Rule: "OR(‘Org2MSP.admin‘, ‘Org2MSP.client‘)"
            Admins:
                Type: Signature
                Rule: "OR(‘Org2MSP.admin‘)"

        AnchorPeers:
            # AnchorPeers defines the location of peers which can be used
            # for cross org gossip communication.  Note, this value is only
            # encoded in the genesis block in the Application section context
            - Host: peer0.org2.example.com
              Port: 7051

################################################################################
#
#   SECTION: Capabilities
#
#   - This section defines the capabilities of fabric network. This is a new
#   concept as of v1.1.0 and should not be utilized in mixed networks with
#   v1.0.x peers and orderers.  Capabilities define features which must be
#   present in a fabric binary for that binary to safely participate in the
#   fabric network.  For instance, if a new MSP type is added, newer binaries
#   might recognize and validate the signatures from this type, while older
#   binaries without this support would be unable to validate those
#   transactions.  This could lead to different versions of the fabric binaries
#   having different world states.  Instead, defining a capability for a channel
#   informs those binaries without this capability that they must cease
#   processing transactions until they have been upgraded.  For v1.0.x if any
#   capabilities are defined (including a map with all capabilities turned off)
#   then the v1.0.x peer will deliberately crash.
#
################################################################################
Capabilities:
    # Channel capabilities apply to both the orderers and the peers and must be
    # supported by both.  Set the value of the capability to true to require it.
    Global: &ChannelCapabilities
        # V1.1 for Global is a catchall flag for behavior which has been
        # determined to be desired for all orderers and peers running v1.0.x,
        # but the modification of which would cause incompatibilities.  Users
        # should leave this flag set to true.
        V1_1: true

    # Orderer capabilities apply only to the orderers, and may be safely
    # manipulated without concern for upgrading peers.  Set the value of the
    # capability to true to require it.
    Orderer: &OrdererCapabilities
        # V1.1 for Order is a catchall flag for behavior which has been
        # determined to be desired for all orderers running v1.0.x, but the
        # modification of which  would cause incompatibilities.  Users should
        # leave this flag set to true.
        V1_1: true

    # Application capabilities apply only to the peer network, and may be safely
    # manipulated without concern for upgrading orderers.  Set the value of the
    # capability to true to require it.
    Application: &ApplicationCapabilities
        # V1.1 for Application is a catchall flag for behavior which has been
        # determined to be desired for all peers running v1.0.x, but the
        # modification of which would cause incompatibilities.  Users should
        # leave this flag set to true.
        V1_2: true

################################################################################
#
#   SECTION: Application
#
#   - This section defines the values to encode into a config transaction or
#   genesis block for application related parameters
#
################################################################################
Application: &ApplicationDefaults

    # Organizations is the list of orgs which are defined as participants on
    # the application side of the network
    Organizations:

    # Policies defines the set of policies at this level of the config tree
    # For Application policies, their canonical path is
    #   /Channel/Application/<PolicyName>
    Policies:
        Readers:
            Type: ImplicitMeta
            Rule: "ANY Readers"
        Writers:
            Type: ImplicitMeta
            Rule: "ANY Writers"
        Admins:
            Type: ImplicitMeta
            Rule: "MAJORITY Admins"

    # Capabilities describes the application level capabilities, see the
    # dedicated Capabilities section elsewhere in this file for a full
    # description
    Capabilities:
        <<: *ApplicationCapabilities

################################################################################
#
#   SECTION: Orderer
#
#   - This section defines the values to encode into a config transaction or
#   genesis block for orderer related parameters
#
################################################################################
Orderer: &OrdererDefaults

    # Orderer Type: The orderer implementation to start
    # Available types are "solo" and "kafka"
    OrdererType: solo

    Addresses:
        - orderer.example.com:7050

    # Batch Timeout: The amount of time to wait before creating a batch
    BatchTimeout: 2s

    # Batch Size: Controls the number of messages batched into a block
    BatchSize:

        # Max Message Count: The maximum number of messages to permit in a batch
        MaxMessageCount: 10

        # Absolute Max Bytes: The absolute maximum number of bytes allowed for
        # the serialized messages in a batch.
        AbsoluteMaxBytes: 98 MB

        # Preferred Max Bytes: The preferred maximum number of bytes allowed for
        # the serialized messages in a batch. A message larger than the preferred
        # max bytes will result in a batch larger than preferred max bytes.
        PreferredMaxBytes: 512 KB

    Kafka:
        # Brokers: A list of Kafka brokers to which the orderer connects. Edit
        # this list to identify the brokers of the ordering service.
        # NOTE: Use IP:port notation.
        Brokers:
            - 127.0.0.1:9092

    # Organizations is the list of orgs which are defined as participants on
    # the orderer side of the network
    Organizations:

    # Policies defines the set of policies at this level of the config tree
    # For Orderer policies, their canonical path is
    #   /Channel/Orderer/<PolicyName>
    Policies:
        Readers:
            Type: ImplicitMeta
            Rule: "ANY Readers"
        Writers:
            Type: ImplicitMeta
            Rule: "ANY Writers"
        Admins:
            Type: ImplicitMeta
            Rule: "MAJORITY Admins"
        # BlockValidation specifies what signatures must be included in the block
        # from the orderer for the peer to validate it.
        BlockValidation:
            Type: ImplicitMeta
            Rule: "ANY Writers"

    # Capabilities describes the orderer level capabilities, see the
    # dedicated Capabilities section elsewhere in this file for a full
    # description
    Capabilities:
        <<: *OrdererCapabilities

################################################################################
#
#   CHANNEL
#
#   This section defines the values to encode into a config transaction or
#   genesis block for channel related parameters.
#
################################################################################
Channel: &ChannelDefaults
    # Policies defines the set of policies at this level of the config tree
    # For Channel policies, their canonical path is
    #   /Channel/<PolicyName>
    Policies:
        # Who may invoke the ‘Deliver‘ API
        Readers:
            Type: ImplicitMeta
            Rule: "ANY Readers"
        # Who may invoke the ‘Broadcast‘ API
        Writers:
            Type: ImplicitMeta
            Rule: "ANY Writers"
        # By default, who may modify elements at this config level
        Admins:
            Type: ImplicitMeta
            Rule: "MAJORITY Admins"


    # Capabilities describes the channel level capabilities, see the
    # dedicated Capabilities section elsewhere in this file for a full
    # description
    Capabilities:
        <<: *ChannelCapabilities

################################################################################
#
#   Profile
#
#   - Different configuration profiles may be encoded here to be specified
#   as parameters to the configtxgen tool
#
################################################################################
Profiles:

    TwoOrgsOrdererGenesis:
        <<: *ChannelDefaults
        Orderer:
            <<: *OrdererDefaults
            Organizations:
                - *OrdererOrg
        Consortiums:
            SampleConsortium:
                Organizations:
                    - *Org1
                    - *Org2
    TwoOrgsChannel:
        Consortium: SampleConsortium
        Application:
            <<: *ApplicationDefaults
            Organizations:
                - *Org1
                - *Org2

5. 生成公私钥和证书

# ./bin/cryptogen generate --config=./crypto-config.yaml

6. 生成创世区块

# mkdir channel-artifacts
# ./bin/configtxgen -profile TwoOrgsOrdererGenesis -outputBlock ./channel-artifacts/genesis.block

7. 生成通道配置区块

# ./bin/configtxgen -profile TwoOrgsChannel -outputCreateChannelTx ./channel-artifacts/mychannel.tx -channelID mychannel

8. 拷贝生成文件到其它电脑

# cd ..
# scp -r multipeer root@192.168.235.101:/opt/gopath/src/github.com/hyperledger/fabric
# scp -r multipeer root@192.168.235.102:/opt/gopath/src/github.com/hyperledger/fabric
# scp -r multipeer root@192.168.235.103:/opt/gopath/src/github.com/hyperledger/fabric
# scp -r multipeer root@192.168.235.104:/opt/gopath/src/github.com/hyperledger/fabric

9. 准备docker配置文件
    配置docker-compose-orderer.yaml文件，拷贝到multipeer目录下。
docker-compose-orderer.yaml：

# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#

version: ‘2‘

services:

  orderer.example.com:
    container_name: orderer.example.com
    image: hyperledger/fabric-orderer
    environment:
      - ORDERER_GENERAL_LOGLEVEL=debug
      - ORDERER_GENERAL_LISTENADDRESS=0.0.0.0
      - ORDERER_GENERAL_GENESISMETHOD=file
      - ORDERER_GENERAL_GENESISFILE=/var/hyperledger/orderer/orderer.genesis.block
      - ORDERER_GENERAL_LOCALMSPID=OrdererMSP
      - ORDERER_GENERAL_LOCALMSPDIR=/var/hyperledger/orderer/msp
      # enabled TLS
      - ORDERER_GENERAL_TLS_ENABLED=true
      - ORDERER_GENERAL_TLS_PRIVATEKEY=/var/hyperledger/orderer/tls/server.key
      - ORDERER_GENERAL_TLS_CERTIFICATE=/var/hyperledger/orderer/tls/server.crt
      - ORDERER_GENERAL_TLS_ROOTCAS=[/var/hyperledger/orderer/tls/ca.crt]
      - ORDERER_KAFKA_RETRY_SHORTINTERVAL=1s
      - ORDERER_KAFKA_RETRY_SHORTTOTAL=30s
      - ORDERER_KAFKA_VERBOSE=true
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric
    command: orderer
    volumes:
      - ./channel-artifacts/genesis.block:/var/hyperledger/orderer/orderer.genesis.block
      - ./crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/msp:/var/hyperledger/orderer/msp
      - ./crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/tls/:/var/hyperledger/orderer/tls
    ports:
      - 7050:7050

10. 启动Fabric网络

# docker-compose -f docker-compose-orderer.yaml up -d

10.3.2 部署peer0.org1.example.com
1. 准备docker配置文件
    配置docker-compose-peer.yaml文件，拷贝到multipeer目录下。
docker-compose-peer.yaml：

# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#

version: ‘2‘

services:
  peer0.org1.example.com:
    container_name: peer0.org1.example.com
    image: hyperledger/fabric-peer
    environment:
      - CORE_PEER_ID=peer0.org1.example.com
      - CORE_PEER_ADDRESS=peer0.org1.example.com:7051
      - CORE_PEER_CHAINCODEADDRESS=peer0.org1.example.com:7052
      - CORE_PEER_CHAINCODELISTENADDRESS=0.0.0.0:7052
      - CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer0.org1.example.com:7051
      - CORE_PEER_LOCALMSPID=Org1MSP

      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      # the following setting starts chaincode containers on the same
      # bridge network as the peers
      # https://docs.docker.com/compose/networking/
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=multipeer_default
      #- CORE_LOGGING_LEVEL=ERROR
      - CORE_LOGGING_LEVEL=DEBUG
      - CORE_PEER_TLS_ENABLED=true
      - CORE_PEER_GOSSIP_USELEADERELECTION=true
      - CORE_PEER_GOSSIP_ORGLEADER=false
      - CORE_PEER_PROFILE_ENABLED=true
      - CORE_PEER_TLS_CERT_FILE=/etc/hyperledger/fabric/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/etc/hyperledger/fabric/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/etc/hyperledger/fabric/tls/ca.crt
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    command: peer node start
    volumes:
        - /var/run/:/host/var/run/
        - ./crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/msp:/etc/hyperledger/fabric/msp
        - ./crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls:/etc/hyperledger/fabric/tls
    ports:
      - 7051:7051
      - 7052:7052
      - 7053:7053
    extra_hosts:
      - "orderer.example.com:192.168.235.100"

  cli:
    container_name: cli
    image: hyperledger/fabric-tools
    tty: true
    environment:
      - GOPATH=/opt/gopath
      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      - CORE_LOGGING_LEVEL=DEBUG
      - CORE_PEER_ID=cli
      - CORE_PEER_ADDRESS=peer0.org1.example.com:7051
      - CORE_PEER_LOCALMSPID=Org1MSP
      - CORE_PEER_TLS_ENABLED=true
      - CORE_PEER_TLS_CERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt
      - CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    volumes:
        - /var/run/:/host/var/run/
        - ./chaincode/go/:/opt/gopath/src/github.com/hyperledger/fabric/multipeer/chaincode/go
        - ./crypto-config:/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/
        - ./channel-artifacts:/opt/gopath/src/github.com/hyperledger/fabric/peer/channel-artifacts
    depends_on:
       - peer0.org1.example.com
    extra_hosts: 
       - "orderer.example.com:192.168.235.100" 
       - "peer0.org1.example.com:192.168.235.101" 
       - "peer1.org1.example.com:192.168.235.102" 
       - "peer0.org2.example.com:192.168.235.103" 
       - "peer1.org2.example.com:192.168.235.104"

2. 准备部署智能合约
    拷贝examples/chaincode/go/example02目录下的文件到multipeer/chaincode/go/example02目录下。
3. 启动Fabric网络
1) 启动peer

# cd $GOPATH/src/github.com/hyperledger/fabric/multipeer
# docker-compose -f docker-compose-peer.yaml up -d

2) 启动cli容器

# docker exec -it cli bash

3) 创建Channel

# ORDERER_CA=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem
# peer channel create -o orderer.example.com:7050 -c mychannel -f ./channel-artifacts/mychannel.tx --tls --cafile $ORDERER_CA

4) Peer加入Channel

# peer channel join -b mychannel.block

5) 保存mychannel.block
    命令的xxxxxxxx替换为图中红框中的字符。


技术分享图片
图：cli客户端

 

# exit
# docker cp xxxxxxxx:/opt/gopath/src/github.com/hyperledger/fabric/peer/mychannel.block /opt/gopath/src/github.com/hyperledger/fabric/multipeer

6) mychannel.block拷贝到org1的peer1电脑

# scp mychannel.block root@192.168.235.102:/opt/gopath/src/github.com/hyperledger/fabric/multipeer
# scp mychannel.block root@192.168.235.103:/opt/gopath/src/github.com/hyperledger/fabric/multipeer
# scp mychannel.block root@192.168.235.104:/opt/gopath/src/github.com/hyperledger/fabric/multipeer

4. 安装与运行智能合约
1） 安装智能合约

# docker exec -it cli bash
# peer chaincode install -n mycc -p github.com/hyperledger/fabric/multipeer/chaincode/go/example02/cmd/ -v 1.0

2） 实例化智能合约
区块初始化数据为a为100，b为200。

# ORDERER_CA=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem
# peer chaincode instantiate -o orderer.example.com:7050 --tls --cafile $ORDERER_CA -C mychannel -n mycc -v 1.0 -c ‘{"Args":["init","a","100","b","200"]}‘ -P "OR (‘Org1MSP.peer‘,‘Org2MSP.peer‘)"

3） Peer上查询a，显示100

# peer chaincode query -C mychannel -n mycc -c ‘{"Args":["query","a"]}‘

查询a成功结果如下图所示：


技术分享图片
图：查询a成功结果


4） Peer上进行a向b转10交易

# peer chaincode invoke --tls --cafile $ORDERER_CA -C mychannel -n mycc -c ‘{"Args":["invoke","a","b","10"]}‘

交易成功结果如下图所示：

技术分享图片
图：交易成功结果


5） Peer上查询a，显示210

# peer chaincode query -C mychannel -n mycc -c ‘{"Args":["query","b"]}‘

查询b成功结果如下图所示：

技术分享图片


10.3.3 部署peer1.org1.example.com
1 准备docker配置文件
   配置docker-compose-peer.yaml文件，拷贝到multipeer目录下。
docker-compose-peer.yaml：

# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#

version: ‘2‘

services:
  peer1.org1.example.com:
    container_name: peer1.org1.example.com
    image: hyperledger/fabric-peer
    environment:
      - CORE_PEER_ID=peer1.org1.example.com
      - CORE_PEER_ADDRESS=peer1.org1.example.com:7051
      - CORE_PEER_CHAINCODEADDRESS=peer1.org1.example.com:7052
      - CORE_PEER_CHAINCODELISTENADDRESS=0.0.0.0:7052
      - CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer1.org1.example.com:7051
      - CORE_PEER_LOCALMSPID=Org1MSP

      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      # the following setting starts chaincode containers on the same
      # bridge network as the peers
      # https://docs.docker.com/compose/networking/
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=multipeer_default
      #- CORE_LOGGING_LEVEL=ERROR
      - CORE_LOGGING_LEVEL=DEBUG
      - CORE_PEER_TLS_ENABLED=true
      - CORE_PEER_GOSSIP_USELEADERELECTION=true
      - CORE_PEER_GOSSIP_ORGLEADER=false
      - CORE_PEER_PROFILE_ENABLED=true
      - CORE_PEER_TLS_CERT_FILE=/etc/hyperledger/fabric/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/etc/hyperledger/fabric/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/etc/hyperledger/fabric/tls/ca.crt
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    command: peer node start
    volumes:
        - /var/run/:/host/var/run/
        - ./crypto-config/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/msp:/etc/hyperledger/fabric/msp
        - ./crypto-config/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls:/etc/hyperledger/fabric/tls
    ports:
      - 7051:7051
      - 7052:7052
      - 7053:7053
    extra_hosts:
      - "orderer.example.com:192.168.235.100"

  cli:
    container_name: cli
    image: hyperledger/fabric-tools
    tty: true
    environment:
      - GOPATH=/opt/gopath
      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      - CORE_LOGGING_LEVEL=DEBUG
      - CORE_PEER_ID=cli
      - CORE_PEER_ADDRESS=peer1.org1.example.com:7051
      - CORE_PEER_LOCALMSPID=Org1MSP
      - CORE_PEER_TLS_ENABLED=true
      - CORE_PEER_TLS_CERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls/ca.crt
      - CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    volumes:
        - /var/run/:/host/var/run/
        - ./chaincode/go/:/opt/gopath/src/github.com/hyperledger/fabric/multipeer/chaincode/go
        - ./crypto-config:/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/
        - ./channel-artifacts:/opt/gopath/src/github.com/hyperledger/fabric/peer/channel-artifacts
    depends_on:
       - peer1.org1.example.com
    extra_hosts: 
       - "orderer.example.com:192.168.235.100" 
       - "peer0.org1.example.com:192.168.235.101" 
       - "peer1.org1.example.com:192.168.235.102" 
       - "peer0.org2.example.com:192.168.235.103" 
       - "peer1.org2.example.com:192.168.235.104"

2 准备部署智能合约
   拷贝examples/chaincode/go/example02目录下的文件到multipeer/chaincode/go/example02目录下。
3 启动Fabric网络
1) 启动peer

# cd $GOPATH/src/github.com/hyperledger/fabric/multipeer
# docker-compose -f docker-compose-peer.yaml up -d

2) 启动cli容器

# docker exec -it cli bash

3) 拷贝mychannel.block到peer中
命令的xxxxxxxx替换为图中红框中的字符。

技术分享图片
图：cli客户端

 

# exit
# docker cp /opt/gopath/src/github.com/hyperledger/fabric/multipeer/mychannel.block xxxxxxxx:/opt/gopath/src/github.com/hyperledger/fabric/peer/

4) Peer加入Channel

# docker exec -it cli bash
# peer channel join -b mychannel.block

4 安装与运行智能合约
1） 安装智能合约

# peer chaincode install -n mycc -p github.com/hyperledger/fabric/multipeer/chaincode/go/example02/cmd/ -v 1.0

2） Peer上查询a，显示90

# peer chaincode query -C mychannel -n mycc -c ‘{"Args":["query","a"]}‘

查询a成功结果如下图所示：

技术分享图片
图：查询a成功结果


3） Peer上进行a向b转10交易

# ORDERER_CA=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem
# peer chaincode invoke --tls --cafile $ORDERER_CA -C mychannel -n mycc -c ‘{"Args":["invoke","a","b","10"]}‘

交易成功结果如下图所示：

技术分享图片
图：交易成功结果


4） Peer上查询b，显示220

# peer chaincode query -C mychannel -n mycc -c ‘{"Args":["query","b"]}‘

查询b成功结果如下图所示：

技术分享图片


10.3.4 部署peer0.org2.example.com
1 准备docker配置文件
   配置docker-compose-peer.yaml文件，拷贝到multipeer目录下。
docker-compose-peer.yaml：

# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#

version: ‘2‘

services:
  peer0.org2.example.com:
    container_name: peer0.org2.example.com
    image: hyperledger/fabric-peer
    environment:
      - CORE_PEER_ID=peer0.org2.example.com
      - CORE_PEER_ADDRESS=peer0.org2.example.com:7051
      - CORE_PEER_CHAINCODEADDRESS=peer0.org2.example.com:7052
      - CORE_PEER_CHAINCODELISTENADDRESS=0.0.0.0:7052
      - CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer0.org2.example.com:7051
      - CORE_PEER_LOCALMSPID=Org2MSP

      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      # the following setting starts chaincode containers on the same
      # bridge network as the peers
      # https://docs.docker.com/compose/networking/
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=multipeer_default
      #- CORE_LOGGING_LEVEL=ERROR
      - CORE_LOGGING_LEVEL=DEBUG
      - CORE_PEER_TLS_ENABLED=true
      - CORE_PEER_GOSSIP_USELEADERELECTION=true
      - CORE_PEER_GOSSIP_ORGLEADER=false
      - CORE_PEER_PROFILE_ENABLED=true
      - CORE_PEER_TLS_CERT_FILE=/etc/hyperledger/fabric/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/etc/hyperledger/fabric/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/etc/hyperledger/fabric/tls/ca.crt
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    command: peer node start
    volumes:
        - /var/run/:/host/var/run/
        - ./crypto-config/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/msp:/etc/hyperledger/fabric/msp
        - ./crypto-config/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls:/etc/hyperledger/fabric/tls
    ports:
      - 7051:7051
      - 7052:7052
      - 7053:7053
    extra_hosts:
      - "orderer.example.com:192.168.235.100"

  cli:
    container_name: cli
    image: hyperledger/fabric-tools
    tty: true
    environment:
      - GOPATH=/opt/gopath
      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      - CORE_LOGGING_LEVEL=DEBUG
      - CORE_PEER_ID=cli
      - CORE_PEER_ADDRESS=peer0.org2.example.com:7051
      - CORE_PEER_LOCALMSPID=Org2MSP
      - CORE_PEER_TLS_ENABLED=true
      - CORE_PEER_TLS_CERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt
      - CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/users/Admin@org2.example.com/msp
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    volumes:
        - /var/run/:/host/var/run/
        - ./chaincode/go/:/opt/gopath/src/github.com/hyperledger/fabric/multipeer/chaincode/go
        - ./crypto-config:/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/
        - ./channel-artifacts:/opt/gopath/src/github.com/hyperledger/fabric/peer/channel-artifacts
    depends_on:
       - peer0.org2.example.com
    extra_hosts: 
       - "orderer.example.com:192.168.235.100" 
       - "peer0.org1.example.com:192.168.235.101" 
       - "peer1.org1.example.com:192.168.235.102" 
       - "peer0.org2.example.com:192.168.235.103" 
       - "peer1.org2.example.com:192.168.235.104"

2 准备部署智能合约
   拷贝examples/chaincode/go/example02目录下的文件到multipeer/chaincode/go/example02目录下。
3 启动Fabric网络
1) 启动peer

# cd $GOPATH/src/github.com/hyperledger/fabric/multipeer
# docker-compose -f docker-compose-peer.yaml up -d

2) 启动cli容器

# docker exec -it cli bash

3) 拷贝mychannel.block到peer中
命令的xxxxxxxx替换为图中红框中的字符。

技术分享图片
图：cli客户端

 

# exit
# docker cp /opt/gopath/src/github.com/hyperledger/fabric/multipeer/mychannel.block xxxxxxxx:/opt/gopath/src/github.com/hyperledger/fabric/peer/

4) Peer加入Channel

# docker exec -it cli bash
# peer channel join -b mychannel.block

4 安装与运行智能合约
1） 安装智能合约

# peer chaincode install -n mycc -p github.com/hyperledger/fabric/multipeer/chaincode/go/example02/cmd/ -v 1.0

2） Peer上查询a，显示80

# peer chaincode query -C mychannel -n mycc -c ‘{"Args":["query","a"]}‘

查询a成功结果如下图所示：

技术分享图片
图：查询a成功结果


3） Peer上进行a向b转20交易

# ORDERER_CA=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem
# peer chaincode invoke --tls --cafile $ORDERER_CA -C mychannel -n mycc -c ‘{"Args":["invoke","a","b","20"]}‘

交易成功结果如下图所示：

技术分享图片
图：交易成功结果


4） Peer上查询b，显示240

# peer chaincode query -C mychannel -n mycc -c ‘{"Args":["query","b"]}‘

查询b成功结果如下图所示：

技术分享图片

 

10.3.5 部署peer1.org2.example.com
1 准备docker配置文件
   配置docker-compose-peer.yaml文件，拷贝到multipeer目录下。
docker-compose-peer.yaml：

# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#

version: ‘2‘

services:
  peer1.org2.example.com:
    container_name: peer1.org2.example.com
    image: hyperledger/fabric-peer
    environment:
      - CORE_PEER_ID=peer1.org2.example.com
      - CORE_PEER_ADDRESS=peer1.org2.example.com:7051
      - CORE_PEER_CHAINCODEADDRESS=peer1.org2.example.com:7052
      - CORE_PEER_CHAINCODELISTENADDRESS=0.0.0.0:7052
      - CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer1.org2.example.com:7051
      - CORE_PEER_LOCALMSPID=Org2MSP

      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      # the following setting starts chaincode containers on the same
      # bridge network as the peers
      # https://docs.docker.com/compose/networking/
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=multipeer_default
      #- CORE_LOGGING_LEVEL=ERROR
      - CORE_LOGGING_LEVEL=DEBUG
      - CORE_PEER_TLS_ENABLED=true
      - CORE_PEER_GOSSIP_USELEADERELECTION=true
      - CORE_PEER_GOSSIP_ORGLEADER=false
      - CORE_PEER_PROFILE_ENABLED=true
      - CORE_PEER_TLS_CERT_FILE=/etc/hyperledger/fabric/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/etc/hyperledger/fabric/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/etc/hyperledger/fabric/tls/ca.crt
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    command: peer node start
    volumes:
        - /var/run/:/host/var/run/
        - ./crypto-config/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/msp:/etc/hyperledger/fabric/msp
        - ./crypto-config/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/tls:/etc/hyperledger/fabric/tls
    ports:
      - 7051:7051
      - 7052:7052
      - 7053:7053
    extra_hosts:
      - "orderer.example.com:192.168.235.100"

  cli:
    container_name: cli
    image: hyperledger/fabric-tools
    tty: true
    environment:
      - GOPATH=/opt/gopath
      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      - CORE_LOGGING_LEVEL=DEBUG
      - CORE_PEER_ID=cli
      - CORE_PEER_ADDRESS=peer1.org2.example.com:7051
      - CORE_PEER_LOCALMSPID=Org2MSP
      - CORE_PEER_TLS_ENABLED=true
      - CORE_PEER_TLS_CERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/tls/ca.crt
      - CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/users/Admin@org2.example.com/msp
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    volumes:
        - /var/run/:/host/var/run/
        - ./chaincode/go/:/opt/gopath/src/github.com/hyperledger/fabric/multipeer/chaincode/go
        - ./crypto-config:/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/
        - ./channel-artifacts:/opt/gopath/src/github.com/hyperledger/fabric/peer/channel-artifacts
    depends_on:
       - peer1.org2.example.com
    extra_hosts: 
       - "orderer.example.com:192.168.235.100" 
       - "peer0.org1.example.com:192.168.235.101" 
       - "peer1.org1.example.com:192.168.235.102" 
       - "peer0.org2.example.com:192.168.235.103" 
       - "peer1.org2.example.com:192.168.235.104"

2 准备部署智能合约
   拷贝examples/chaincode/go/example02目录下的文件到multipeer/chaincode/go/example02目录下。
3 启动Fabric网络
1) 启动peer

# cd $GOPATH/src/github.com/hyperledger/fabric/multipeer
# docker-compose -f docker-compose-peer.yaml up -d

2) 启动cli容器

# docker exec -it cli bash

3) 拷贝mychannel.block到peer中
命令的xxxxxxxx替换为图中红框中的字符。

 

技术分享图片

 

# exit
# docker cp /opt/gopath/src/github.com/hyperledger/fabric/multipeer/mychannel.block xxxxxxxx:/opt/gopath/src/github.com/hyperledger/fabric/peer/

4) Peer加入Channel

# docker exec -it cli bash
# peer channel join -b mychannel.block

4 安装与运行智能合约
1） 安装智能合约

# peer chaincode install -n mycc -p github.com/hyperledger/fabric/multipeer/chaincode/go/example02/cmd/ -v 1.0

2） Peer上查询a，显示60

# peer chaincode query -C mychannel -n mycc -c ‘{"Args":["query","a"]}‘

查询a成功结果如下图所示：

技术分享图片
图：查询a成功结果


3） Peer上进行a向b转30交易

# ORDERER_CA=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem
# peer chaincode invoke --tls --cafile $ORDERER_CA -C mychannel -n mycc -c ‘{"Args":["invoke","a","b","30"]}‘

交易成功结果如下图所示：

技术分享图片
图：交易成功结果


4） Peer上查询b，显示270

# peer chaincode query -C mychannel -n mycc -c ‘{"Args":["query","b"]}‘

查询b成功结果如下图所示：

技术分享图片

HyperLedger Fabric 1.2 多机多节点部署（10.3）

标签：listen   deb   err   docke   different   volume   maximum   ase   ges   

原文地址：https://www.cnblogs.com/llongst/p/9571363.html
踩
(0)
赞
(0)
   
举报
评论 一句话评论（0）
登录后才能评论！
分享档案
更多>
2021年07月29日 (22)
2021年07月28日 (40)
2021年07月27日 (32)
2021年07月26日 (79)
2021年07月23日 (29)
2021年07月22日 (30)
2021年07月21日 (42)
2021年07月20日 (16)
2021年07月19日 (90)
2021年07月16日 (35)
周排行
mamicode.com排行更多图片
更多
友情链接
兰亭集智   国之画   百度统计   站长统计   阿里云   chrome插件   新版天听网
关于我们 - 联系我们 - 留言反馈
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码！