码迷,mamicode.com
首页 > 其他好文 > 详细

安装 percona-xtrabackup 2.4

时间:2018-09-03 12:04:28      阅读:843      评论:0      收藏:0      [点我收藏+]

标签:last   ref   download   pen   updating   and   install   Xtraback   The   

Installing Percona XtraBackup from Percona yum repository

  1. Install the Percona repository

    You can install Percona yum repository by running the following command as a root user or with sudo:

    yum install http://www.percona.com/downloads/percona-release/redhat/0.1-6/percona-release-0.1-6.noarch.rpm
    

    You should see some output such as the following:

    Retrieving http://www.percona.com/downloads/percona-release/redhat/0.1-6/percona-release-0.1-6.noarch.rpm
    Preparing...                ########################################### [100%]
       1:percona-release        ########################################### [100%]
    

Note

RHEL/Centos 5 doesn’t support installing the packages directly from the remote location so you’ll need to download the package first and install it manually with rpm:

$ wget http://www.percona.com/downloads/percona-release/redhat/0.1-6/percona-release-0.1-6.noarch.rpm
$ rpm -ivH percona-release-0.1-6.noarch.rpm
  1. Testing the repository

    Make sure packages are now available from the repository, by executing the following command:

    yum list | grep percona
    

    You should see output similar to the following:

    ...
    percona-xtrabackup-20.x86_64               2.0.8-587.rhel5             percona-release-x86_64
    percona-xtrabackup-20-debuginfo.x86_64     2.0.8-587.rhel5             percona-release-x86_64
    percona-xtrabackup-20-test.x86_64          2.0.8-587.rhel5             percona-release-x86_64
    percona-xtrabackup-21.x86_64               2.1.9-746.rhel5             percona-release-x86_64
    percona-xtrabackup-21-debuginfo.x86_64     2.1.9-746.rhel5             percona-release-x86_64
    percona-xtrabackup-22.x86_64               2.2.13-1.el5                percona-release-x86_64
    percona-xtrabackup-22-debuginfo.x86_64     2.2.13-1.el5                percona-release-x86_64
    percona-xtrabackup-debuginfo.x86_64        2.3.5-1.el5                 percona-release-x86_64
    percona-xtrabackup-test.x86_64             2.3.5-1.el5                 percona-release-x86_64
    percona-xtrabackup-test-21.x86_64          2.1.9-746.rhel5             percona-release-x86_64
    percona-xtrabackup-test-22.x86_64          2.2.13-1.el5                percona-release-x86_64
    ...
    
  2. Install the packages

    You can now install Percona XtraBackup by running:

    yum install percona-xtrabackup-24
    

Warning

In order to sucessfully install Percona XtraBackup libev package will need to be installed first. libev package can be installed from the EPEL repositories.

Percona yum Testing Repository

Percona offers pre-release builds from our testing repository. To subscribe to the testing repository, you’ll need to enable the testing repository in /etc/yum.repos.d/percona-release.repo. To do so, set both percona-testing-$basearch and percona-testing-noarch to enabled 1 (Note that there are 3 sections in this file: release, testing and experimental - in this case it is the second section that requires updating). NOTE: You’ll need to install the Percona repository first (ref above) if this hasn’t been done already.

Installing Percona XtraBackup using downloaded rpm packages

Download the packages of the desired series for your architecture from the download page. Following example will download Percona XtraBackup 2.4.4 release package for CentOS 7:

$ wget https://www.percona.com/downloads/XtraBackup/Percona-XtraBackup-2.4.4/binary/redhat/7/x86_64/percona-xtrabackup-24-2.4.4-1.el7.x86_64.rpm

Now you can install Percona XtraBackup by running:

$ yum localinstall percona-xtrabackup-24-2.4.4-1.el7.x86_64.rpm

Note

When installing packages manually like this, you’ll need to make sure to resolve all the dependencies and install missing packages yourself.

Uninstalling Percona XtraBackup?

To completely uninstall Percona XtraBackup you’ll need to remove all the installed packages.

Remove the packages

yum remove percona-xtrabackup

查看效果:

[root@weifeng04 ~]# xtrabackup --version
xtrabackup: recognized server arguments: --datadir=/var/lib/mysql
xtrabackup version 2.4.12 based on MySQL server 5.7.19 Linux (x86_64) (revision id: 170eb8c)

 

安装 percona-xtrabackup 2.4

标签:last   ref   download   pen   updating   and   install   Xtraback   The   

原文地址:https://www.cnblogs.com/weifeng1463/p/9577501.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!