标签：conf com sysctl tar when require yml pat arc
一、系统环境变量
【主机信息】
IP 主机名 操作系统版本 10.10.10.102 console CentOS7.5 10.10.10.103 log1 CentOS7.5
10.10.10.104 log2 CentOS7.5
【软件包版本信息】
elasticsearch-6.4.0.tar.gz logstash-6.4.0.tar.gz kibana-6.4.0-linux-x86_64.tar.gz
1. 设置主机名和IP映射
分别在上述三台机器的/etc/hosts文件中追加如下内容：
10.10.10.102 console 10.10.10.103 log1 10.10.10.104 log2
2.关于3台机器的防火墙，并设置开机不启动
#关闭防火墙
systemctl stop firewalld
#设置防火墙开机不启动
systemctl disable firewalld
3.修改3台机器的系统文件描述符大小
vim /etc/security/limits.conf es - nofile 65536
4.增大3台机器的虚拟内存mmap count配置
vim /etc/sysctl.conf
vm.max_map_count = 262144
#使修改生效
sysctl -p
5.在3台机器上分别新建用户es和日志文件目录
useradd es
mkdir /esdata
chown -R es:es /esdata
二、Elasticsearch的安装与配置
1.分别在10.10.10.102、10.10.10.103、10.10.10.104机器上新建Elasticsearch安装目录并修改属主用户和组
mkdir -p /usr/local/elasticsearch-6.4.0 chown -R es:es /usr/local/elasticsearch-6.4.0
2.登录10.10.10.102机器并切换到es用户，将elasticsearch-6.4.0.tar.gz解压到 /usr/local/elasticsearch-6.4.0目录下
tar -xf /home/es/elasticsearch-6.4.0.tar.gz cp -r * /usr/local/elasticsearch-6.4.0
3.修改配置文件
console配置文件如下：
[es@console config]$ cat /usr/local/elasticsearch-6.4.0/config/elasticsearch.yml # ======================== Elasticsearch Configuration ========================= # # NOTE: Elasticsearch comes with reasonable defaults for most settings. # Before you set out to tweak and tune the configuration, make sure you # understand what are you trying to accomplish and the consequences. # # The primary way of configuring a node is via this file. This template lists # the most important settings you may want to configure for a production cluster. # # Please consult the documentation for further information on configuration options: # https://www.elastic.co/guide/en/elasticsearch/reference/index.html # # ---------------------------------- Cluster ----------------------------------- # # Use a descriptive name for your cluster: # cluster.name: console #设置集群的名称为console # # ------------------------------------ Node ------------------------------------ # # Use a descriptive name for the node: # node.name: console #设置集群节点名称为console node.master: true #设置该节点是否为主节点，这里选择true，其他2台机器这里设置为false # # Add custom attributes to the node: # #node.attr.rack: r1 # # ----------------------------------- Paths ------------------------------------ # # Path to directory where to store the data (separate multiple locations by comma): # path.data: /esdata #设置数据目录为/esdata # # Path to log files: # #path.logs: /path/to/logs # # ----------------------------------- Memory ----------------------------------- # # Lock the memory on startup: # #bootstrap.memory_lock: true # #bootstrap.mlockall: true # # Make sure that the heap size is set to about half the memory available # on the system and that the owner of the process is allowed to use this # limit. # # Elasticsearch performs poorly when the system is swapping the memory. # # ---------------------------------- Network ----------------------------------- # # Set the bind address to a specific IP (IPv4 or IPv6): # network.host: 10.10.10.102 #这里配置的是console机器的IP，其他2台机器分别配置自己的IP network.bind_host: 10.10.10.102 #同上 network.publish_host: 10.10.10.102 #同上 # # Set a custom port for HTTP: # http.port: 9200 #开启端口 # # For more information, consult the network module documentation. # # --------------------------------- Discovery ---------------------------------- # # Pass an initial list of hosts to perform discovery when new node is started: # The default list of hosts is ["127.0.0.1", "[::1]"] # discovery.zen.ping.unicast.hosts: ["10.10.10.102:9300"] #配置自动发现机制，其他2台机器也设置这个值 # # Prevent the "split brain" by configuring the majority of nodes (total number of master-eligible nodes / 2 + 1): # discovery.zen.minimum_master_nodes: 1 #设置发现的主节点个数为1 # # For more information, consult the zen discovery module documentation. # # ---------------------------------- Gateway ----------------------------------- # # Block initial recovery after a full cluster restart until N nodes are started: # #gateway.recover_after_nodes: 3 # # For more information, consult the gateway module documentation. # # ---------------------------------- Various ----------------------------------- # # Require explicit names when deleting indices: # #action.destructive_requires_name: true
log1配置文件：
[es@log1 config]$ cat elasticsearch.yml # ======================== Elasticsearch Configuration ========================= # # NOTE: Elasticsearch comes with reasonable defaults for most settings. # Before you set out to tweak and tune the configuration, make sure you # understand what are you trying to accomplish and the consequences. # # The primary way of configuring a node is via this file. This template lists # the most important settings you may want to configure for a production cluster. # # Please consult the documentation for further information on configuration options: # https://www.elastic.co/guide/en/elasticsearch/reference/index.html # # ---------------------------------- Cluster ----------------------------------- # # Use a descriptive name for your cluster: # cluster.name: console # # ------------------------------------ Node ------------------------------------ # # Use a descriptive name for the node: # node.name: log1 node.master: false # # Add custom attributes to the node: # #node.attr.rack: r1 # # ----------------------------------- Paths ------------------------------------ # # Path to directory where to store the data (separate multiple locations by comma): # path.data: /esdata # # Path to log files: # #path.logs: /path/to/logs # # ----------------------------------- Memory ----------------------------------- # # Lock the memory on startup: # #bootstrap.memory_lock: true # #bootstrap.mlockall: true # # Make sure that the heap size is set to about half the memory available # on the system and that the owner of the process is allowed to use this # limit. # # Elasticsearch performs poorly when the system is swapping the memory. # # ---------------------------------- Network ----------------------------------- # # Set the bind address to a specific IP (IPv4 or IPv6): # network.host: 10.10.10.103 network.bind_host: 10.10.10.103 network.publish_host: 10.10.10.103 # # Set a custom port for HTTP: # http.port: 9200 # # For more information, consult the network module documentation. # # --------------------------------- Discovery ---------------------------------- # # Pass an initial list of hosts to perform discovery when new node is started: # The default list of hosts is ["127.0.0.1", "[::1]"] # discovery.zen.ping.unicast.hosts: ["10.10.10.102:9300"] # # Prevent the "split brain" by configuring the majority of nodes (total number of master-eligible nodes / 2 + 1): # discovery.zen.minimum_master_nodes: 1 # # For more information, consult the zen discovery module documentation. # # ---------------------------------- Gateway ----------------------------------- # # Block initial recovery after a full cluster restart until N nodes are started: # #gateway.recover_after_nodes: 3 # # For more information, consult the gateway module documentation. # # ---------------------------------- Various ----------------------------------- # # Require explicit names when deleting indices: # #action.destructive_requires_name: true
log2配置文件：
[es@log2 config]$ cat elasticsearch.yml # ======================== Elasticsearch Configuration ========================= # # NOTE: Elasticsearch comes with reasonable defaults for most settings. # Before you set out to tweak and tune the configuration, make sure you # understand what are you trying to accomplish and the consequences. # # The primary way of configuring a node is via this file. This template lists # the most important settings you may want to configure for a production cluster. # # Please consult the documentation for further information on configuration options: # https://www.elastic.co/guide/en/elasticsearch/reference/index.html # # ---------------------------------- Cluster ----------------------------------- # # Use a descriptive name for your cluster: # cluster.name: console # # ------------------------------------ Node ------------------------------------ # # Use a descriptive name for the node: # node.name: log2 node.master: false # # Add custom attributes to the node: # #node.attr.rack: r1 # # ----------------------------------- Paths ------------------------------------ # # Path to directory where to store the data (separate multiple locations by comma): # path.data: /esdata # # Path to log files: # #path.logs: /path/to/logs # # ----------------------------------- Memory ----------------------------------- # # Lock the memory on startup: # #bootstrap.memory_lock: true # #bootstrap.mlockall: true # # Make sure that the heap size is set to about half the memory available # on the system and that the owner of the process is allowed to use this # limit. # # Elasticsearch performs poorly when the system is swapping the memory. # # ---------------------------------- Network ----------------------------------- # # Set the bind address to a specific IP (IPv4 or IPv6): # network.host: 10.10.10.104 network.bind_host: 10.10.10.104 network.publish_host: 10.10.10.104 # # Set a custom port for HTTP: # http.port: 9200 # # For more information, consult the network module documentation. # # --------------------------------- Discovery ---------------------------------- # # Pass an initial list of hosts to perform discovery when new node is started: # The default list of hosts is ["127.0.0.1", "[::1]"] # discovery.zen.ping.unicast.hosts: ["10.10.10.102:9300"] # # Prevent the "split brain" by configuring the majority of nodes (total number of master-eligible nodes / 2 + 1): # discovery.zen.minimum_master_nodes: 1 # # For more information, consult the zen discovery module documentation. # # ---------------------------------- Gateway ----------------------------------- # # Block initial recovery after a full cluster restart until N nodes are started: # #gateway.recover_after_nodes: 3 # # For more information, consult the gateway module documentation. # # ---------------------------------- Various ----------------------------------- # # Require explicit names when deleting indices: # #action.destructive_requires_name: true
4.后台启动Elasticsearch
/usr/local/elasticsearch-6.4.0/bin/elasticsearch -d
三、
四、
标签：conf com sysctl tar when require yml pat arc
原文地址：https://www.cnblogs.com/xialiaoliao0911/p/9599898.html
