minicom的配置和使用

标签：des   http   io   使用   ar   strong   文件   sp   art   

安装配置minicom
--------------------------------------------------
# lsmod | grep usbserial (如果直接使用串口线，而没有用到USB转串口设备，此步可以跳过)。如果有usbserial，说明系统支持USB转串口。
或者输入命令： dmesg| grep usb 查看usb串口，注意倒数第三行写着：usb2-10: ch341-uart converter now attached to ttyUSB0。现在你可以用ttyUSB0当串口了。

安装minicom
apt-get install minicom
apt-get install lrzsz

配置minicom
# minicom -s
Serial port setup [Enter]
    +-------------------------------------------------------------+
    | A -    Serial Device      : /dev/ttyUSB0                    |
    | B - Lockfile Location     : /var/lock                       |
    | C -   Callin Program      :                                 |
    | D - Callout Program      -:                                 |
    | E -    Bps/Par/Bits       : 115200 8N1                      |
    | F - Hardware Flow Control : No                              |
    | G - Software Flow Control : No                              |
    |                                                             |
    |    Change which setting?                                    |
    +-------------------------------------------------------------+
注: 如果没有使用USB转接口，Serial Device要配置为/dev/ttyS0
Save setup as dfl
Exit from Minicom

使用minicom传输文件
--------------------------------------------------
# minicom
(Ctrl + a) --> s --> zmodem --> [Okay] -->
    +-----------------------------------------+
    |No file selected - enter filename:       |
    |> /home/zxl/ssl/codes/led/lls_led.ko     | [Enter]
    +-----------------------------------------+

配置文件所在目录
--------------------------------------------------
Ctrl + a     o
         +-----[configuration]------+
         | Filenames and paths      |
         | File transfer protocols -|
         | Serial port setup        |
         | Modem and dialing        |
         | Screen and keyboard      |
         | Save setup as dfl        |
         | Save setup as..          |
         | Exit                     |
         +--------------------------+
+-----------------------------------------------------------------------+
| A - Download directory : /home/zxl                                    |
| B - Upload directory   : /tmp                                         |
| C - Script directory   :                                              |
| D - Script program     : runscript                                    |
| E - Kermit program     :                                              |
| F - Logging options                                                   |
|                                                                       |
|    Change which setting?                                              |
+-----------------------------------------------------------------------+
    A - download 下载的文件的存放位置         
    B - upload   从此处读取上传的文件
    download     开发板 ---> PC
    upload       PC     ---> 开发板
    B - Upload directory   : /tmp
    PC机向开发板发送文件，需要发送的文件在/tmp目录下(PC机上的目录)。做了此项配置后，每次向开发板发送文件时，只需输入文件名即可，无需输入文件所在目录的绝对路径

开发板 ---> PC
--------------------------------------------------
    开发板上的(操作)命令
    # sz filename
    开发板上的文件filename将被传输到PC机上~目录下

录制开发板输入信息:
--------------------------------------------------
Ctrl + A + L
    +-----------------------------------------+               
    |Capture to which file?                   |               
    |> /tmp/minicom.cap                       |               
    +-----------------------------------------+               

参考链接：http://hi.baidu.com/zengzhaonong/item/a7452f3d8d50ecbf124b1449

minicom的配置和使用

标签：des   http   io   使用   ar   strong   文件   sp   art   

原文地址：http://www.cnblogs.com/klcf0220/p/4012095.html