码迷,mamicode.com
首页 > 其他好文 > 详细

807. Max Increase to Keep City Skyline

时间:2018-09-25 17:26:17      阅读:174      评论:0      收藏:0      [点我收藏+]

标签:after   sam   otto   lin   range   Plan   ase   list   app   

In a 2 dimensional array grid, each value grid[i][j] represents the height of a building located there. We are allowed to increase the height of any number of buildings, by any amount (the amounts can be different for different buildings). Height 0 is considered to be a building as well.

At the end, the "skyline" when viewed from all four directions of the grid, i.e. top, bottom, left, and right, must be the same as the skyline of the original grid. A city‘s skyline is the outer contour of the rectangles formed by all the buildings when viewed from a distance. See the following example.

What is the maximum total sum that the height of the buildings can be increased?

Example:
Input: grid = [[3,0,8,4],[2,4,5,7],[9,2,6,3],[0,3,1,0]]
Output: 35
Explanation: 
The grid is:
[ [3, 0, 8, 4], 
  [2, 4, 5, 7],
  [9, 2, 6, 3],
  [0, 3, 1, 0] ]

The skyline viewed from top or bottom is: [9, 4, 8, 7]
The skyline viewed from left or right is: [8, 7, 9, 3]

The grid after increasing the height of buildings without affecting skylines is:

gridNew = [ [8, 4, 8, 7],
            [7, 4, 7, 7],
            [9, 4, 8, 7],
            [3, 3, 3, 3] ]
class Solution:
    def maxIncreaseKeepingSkyline(self, grid):
        """
        :type grid: List[List[int]]
        :rtype: int
        """
        a = []
        b = []
        for i in range(len(grid)):
            max = 0
            for j in range(len(grid[0])):
                if grid[i][j]>max:
                    max = grid[i][j]
            a.append(max)
        for j in range(len(grid[0])):
            max = 0
            for i in range(len(grid)):
                if grid[i][j]>max:
                    max = grid[i][j]
            b.append(max)
        sum = 0
        for i in range(len(grid)):
            for j in range(len(grid[0])):
                sum += min(a[i],b[j]) - grid[i][j]
        return sum

例子讲得很清楚,按照例子里的思路写就可以了。

807. Max Increase to Keep City Skyline

标签:after   sam   otto   lin   range   Plan   ase   list   app   

原文地址:https://www.cnblogs.com/bernieloveslife/p/9700416.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!