标签：page enc ret lib 位置 enabled ble msi 其它
#Elasticsearch 是一个实时的分布式搜索和分析引擎，它可以用于全文搜索，结构化搜索以及分析。它是一个建立在全文搜索引擎 Apache Lucene 基础上的搜索引擎，使用 Java 语言编写。
elasticsearch.yml
# ======================== Elasticsearch Configuration =========================
#
# NOTE: Elasticsearch comes with reasonable defaults for most settings.
# Before you set out to tweak and tune the configuration, make sure you
# understand what are you trying to accomplish and the consequences.
#
# The primary way of configuring a node is via this file. This template lists
# the most important settings you may want to configure for a production cluster.
#
# Please consult the documentation for further information on configuration options:
# https://www.elastic.co/guide/en/elasticsearch/reference/index.html
#
# ---------------------------------- Cluster -----------------------------------
#
# Use a descriptive name for your cluster:
#配置es的集群名称，默认是elasticsearch，es会自动发现在同一网段下的es，如果在同一网段下有多个集群，就可以用这个属性来区分不同的集群。
cluster.name: ELK
#
# ------------------------------------ Node ------------------------------------
#
# Use a descriptive name for the node:
#节点名
node.name: Jarvis
#新添加的集群设置，指定该节点是否有资格被选举成为node，默认是true，es是默认集群中的第一台机器为master，如果这台机挂了就会重新选举master。
#node.master: true
#指定该节点是否存储索引数据，默认为true
#node.data: true
#
# Add custom attributes to the node:
#
#node.attr.rack: r1
#
# ----------------------------------- Paths ------------------------------------
#
# Path to directory where to store the data (separate multiple locations by comma):
#设置索引数据的存储路径，默认是es根目录下的data文件夹，可以设置多个存储路径，用逗号隔开，例：
path.data: /var/lib/elasticsearch, /var/lib/elasticsearch1
#
# Path to log files:
#设置日志所存位置
path.logs: /var/log/elasticsearch
#
#index.number_of_shards: 5 #shard的数目
#index.number_of_replicas: 3 #数据副本的数目
# ----------------------------------- Memory -----------------------------------
#
# Lock the memory on startup:
#设置为true来锁住内存。因为当jvm开始swapping时es的效率会降低，所以要保证它不swap，
#可以把ES_MIN_MEM和ES_MAX_MEM两个环境变量设置成同一个值，并且保证机器有足够的内存分配给es。
#同时也要允许elasticsearch的进程可以锁住内存，linux下可以通过`ulimit -l unlimited`命令。
bootstrap.memory_lock: true
#
# Make sure that the heap size is set to about half the memory available
# on the system and that the owner of the process is allowed to use this
# limit.
#
# Elasticsearch performs poorly when the system is swapping the memory.
#
# ---------------------------------- Network -----------------------------------
#
# Set the bind address to a specific IP (IPv4 or IPv6):
#设置绑定的IP地址，最好设置为0.0.0.0方便通信。
network.host: 0.0.0.0
#
# Set a custom port for HTTP:
#端口 默认9200
http.port: 9200
#transport.tcp.port: 9300
#
# For more information, consult the network module documentation.
#
# --------------------------------- Discovery ----------------------------------
#
# Pass an initial list of hosts to perform discovery when new node is started:
# The default list of hosts is ["127.0.0.1", "[::1]"]
#设置集群中master节点的初始列表，可以通过这些节点来自动发现新加入集群的节点。
discovery.zen.ping.unicast.hosts: ["0.0.0.0:9300","0.0.0.0:9301","0.0.0.0:9302"]
#
# Prevent the "split brain" by configuring the majority of nodes (total number of master-eligible nodes / 2 + 1):
#设置这个参数来保证集群中的节点可以知道其它N个有master资格的节点。默认为1，对于大的集群来说，可以设置大一点的值（2-4）
discovery.zen.minimum_master_nodes: 1
#discovery.zen.ping.timeout: 120s #设置集群中自动发现其他节点时ping连接的超时时间
#discovery.zen.ping.multicast.enabled: true #设置是否打开多播发现节点
#
# For more information, consult the zen discovery module documentation.
#
# ---------------------------------- Gateway -----------------------------------
#
# Block initial recovery after a full cluster restart until N nodes are started:
#
#gateway.recover_after_nodes: 3
#
# For more information, consult the gateway module documentation.
#
# ---------------------------------- Various -----------------------------------
#
# Require explicit names when deleting indices:
#
#action.destructive_requires_name: true
http.cors.enabled: true
http.cors.allow-origin: "*"
#http.cors.allow-headers: Authorization,Content-Type
#xpack认证，设置为false
xpack.security.enabled: false
#action.auto_create_index: .security,.monitoring*,.watches,.triggered_watches,.watcher-history*,.ml*
#es默认创建的索引，以下配置是所有
action.auto_create_index: +*
jvm.options
## JVM configuration
################################################################
## IMPORTANT: JVM heap size
################################################################
##
## You should always set the min and max JVM heap
## size to the same value. For example, to set
## the heap to 4 GB, set:
##
## -Xms4g
## -Xmx4g
##
## See https://www.elastic.co/guide/en/elasticsearch/reference/current/heap-size.html
## for more information
##
################################################################
# Xms represents the initial size of total heap space
# Xmx represents the maximum size of total heap space
-Xms1g
-Xmx1g
################################################################
## Expert settings
################################################################
##
## All settings below this section are considered
## expert settings. Don‘t tamper with them unless
## you understand what you are doing
##
################################################################
## GC configuration
-XX:+UseConcMarkSweepGC
-XX:CMSInitiatingOccupancyFraction=75
-XX:+UseCMSInitiatingOccupancyOnly
## optimizations
# pre-touch memory pages used by the JVM during initialization
-XX:+AlwaysPreTouch
## basic
# explicitly set the stack size
-Xss1m
# set to headless, just in case
-Djava.awt.headless=true
# ensure UTF-8 encoding by default (e.g. filenames)
-Dfile.encoding=UTF-8
# use our provided JNA always versus the system one
-Djna.nosys=true
# turn off a JDK optimization that throws away stack traces for common
# exceptions because stack traces are important for debugging
-XX:-OmitStackTraceInFastThrow
# flags to configure Netty
-Dio.netty.noUnsafe=true
-Dio.netty.noKeySetOptimization=true
-Dio.netty.recycler.maxCapacityPerThread=0
# log4j 2
-Dlog4j.shutdownHookEnabled=false
-Dlog4j2.disable.jmx=true
-Djava.io.tmpdir=${ES_TMPDIR}
## heap dumps
# generate a heap dump when an allocation from the Java heap fails
# heap dumps are created in the working directory of the JVM
-XX:+HeapDumpOnOutOfMemoryError
# specify an alternative path for heap dumps
# ensure the directory exists and has sufficient space
-XX:HeapDumpPath=/var/lib/elasticsearch
## JDK 8 GC logging
8:-XX:+PrintGCDetails
8:-XX:+PrintGCDateStamps
8:-XX:+PrintTenuringDistribution
8:-XX:+PrintGCApplicationStoppedTime
8:-Xloggc:/var/log/elasticsearch/gc.log
8:-XX:+UseGCLogFileRotation
8:-XX:NumberOfGCLogFiles=32
8:-XX:GCLogFileSize=64m
# JDK 9+ GC logging
9-:-Xlog:gc*,gc+age=trace,safepoint:file=/var/log/elasticsearch/gc.log:utctime,pid,tags:filecount=32,filesize=64m
# due to internationalization enhancements in JDK 9 Elasticsearch need to set the provider to COMPAT otherwise
# time/date parsing will break in an incompatible way for some date patterns and locals
9-:-Djava.locale.providers=COMPAT
标签：page enc ret lib 位置 enabled ble msi 其它
原文地址：https://www.cnblogs.com/luoyan01/p/9734319.html
