码迷,mamicode.com
首页 > 其他好文 > 详细

ansible_playbook 一键搭建集群架构

时间:2018-10-06 22:07:47      阅读:379      评论:0      收藏:0      [点我收藏+]

标签:data   ip地址   .com   smis   epel   epo   header   创建   directory   

目录

服务器主机名和 IP 规划参考模板

主机名 eth0 网卡 eth1 网卡 服务简介
lb01 10.0.0.5/24 172.16.1.5/24 负载服务
lb02 10.0.0.6/24 172.16.1.6/24 负载服务
web01 10.0.0.7/24 172.16.1.7/24 phpwww 服务
web02 10.0.0.8/24 172.16.1.8/24 php www 服务
tweb01 10.0.0.9/24 172.16.1.9/24 tomcat www 服务
db01 10.0.0.51/24 172.16.1.51/24 数据库服务
nfs01 10.0.0.31/24 172.16.1.31/24 存储服务
backup 10.0.0.41/24 172.16.1.41/24 备份服务
m01 10.0.0.61/24 172.16.1.61/24 管理服务

基础优化

修改ip地址
sed -i ‘s#222#61#g‘ /etc/sysconfig/network-scripts/ifcfg-eth[01]


永久修改主机名
[root@oldboy-c7 ~]# hostnamectl set-hostname oldboyedu-cc7
[root@web01 data]# vim /etc/hosts
127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
172.16.1.5  lb01
172.16.1.6  lo02
172.16.1.7  web01
172.16.1.8  web02
172.16.1.9  sweb
172.16.1.31  nfs
172.16.1.41  backup
172.16.1.51  db
#批量推送其他主机
[root@web01 data]# scp -rp /etc/hosts root@172.16.1.31:/etc/


//2.关闭firewalld防火墙
systemctl disable firewalld
systemctl stop firewalld
systemctl status firewalld

//3.关闭selinux
# 方式一
sed -ri ‘s#(^SELINUX=).*#\1disabled#g‘ /etc/selinux/config
# 方式二
sed -i ‘/^SELINUX=/c SELINUX=disabled‘ /etc/selinux/config
# 方式三
vim /etc/selinux/config

# 临时生效
setenforce 0  

//4.优化ulimit
echo ‘* - nofile 65535‘ >> /etc/security/limits.conf

//5 重启快照

SSH、Ansible,批量管理服务项目

1.创建密钥对
[root@m01 ~]# ssh-keygen -t rsa -C xuliangwei.com   #一路回车即可
[root@m01 ~]# ls ~/.ssh/
id_rsa(钥匙)  id_rsa.pub(锁头)

2#发送密钥给需要登录的用户
[root@m01 ~]# ssh-copy-id -i ~/.ssh/id_rsa.pub root@172.16.1.31

# 测试
#远程登录对端主机方式
[root@m01 ~]# ssh root@172.16.1.41
# 不登陆主机执行命令
[root@m01 ~]# ssh root@172.16.1.41 "hostname -i"


.ansible借助公钥批量管理
#利用非交换式工具实现批量分发公钥与批量管理服务器
[root@m01 ~]# ssh-copy-id -i ~/.ssh/id_rsa.pub root@172.16.1.41

[root@m01 ~]# yum install ansible -y

//检查ansible版本
[root@m01 ~]# ansible --version
ansible 2.6.1

配置ansible  主机清单
[root@m01 ~]# vim /etc/ansible/hosts
[lb]
172.16.1.5
172.16.1.6
[web]
172.16.1.7
172.16.1.8
[sweb]
172.16.1.9
[nfs]
172.16.1.31
[backup]
172.16.1.41
[db]
172.16.1.51

测试
# ansible是通过ssh端口探测通信
[root@m01 ~]# ansible all -m ping
#批量执行命令
[root@m01 ~]# ansible all -m command -a "df -h"
[root@m01 ~]# ansible all -m command -a "hostname"

剧本开始…………….10分钟左右

mail.yaml

- import_playbook: base.yaml
- import_playbook: rsync.yaml
- import_playbook: nfs.yaml
- import_playbook: sersync.yaml
- import_playbook: web.yaml
- import_playbook: tweb.yaml
- import_playbook: lb.yaml
- import_playbook: keepalived.yaml
- import_playbook: keepalived02.yaml
- import_playbook: mysql.yaml

base.yaml

- hosts: all
  tasks:
#    - name: Clear yum.repos.d
#      file: path=/etc/yum.repos.d/ state=absent
#
#    - name: Create yum.repos.d
#      file: path=/etc/yum.repos.d/ state=directory  

#    - name: install aliyun base
#      get_url: url=http://mirrors.aliyun.com/repo/Centos-7.repo dest=/etc/yum.repos.d/CentOS-Base.repo
#
#    - name: install aliyun epel
#      get_url: url=http://mirrors.aliyun.com/repo/epel-7.repo dest=/etc/yum.repos.d/epel.repo

    - name: Push centos75
      copy: src=./file/contos75.repo  dest=/etc/yum.repos.d/

    - name: Push ops
      copy: src=./file/ops.repo  dest=/etc/yum.repos.d/

#    - name: Dns Client
#      copy: src=./conf/resolv.conf dest=/etc/resolv.conf

    - name: Install base soft
      yum: name=rsync,nfs-utils,net-tools,vim,tree,htop,iftop,iotop,lrzsz,sl,wget,unzip,telnet,nmap,nc,psmisc,dos2unix,bash-completion,iotop,iftop,sysstat,screen,zip state=installed

    - name: Create Group WWW
      group: name=www gid=666

    - name: Create User WWW
      user: name=www uid=666 group=666 create_home=no  shell=/sbin/nologin

    - name: Create Rsync_Client_Pass
      copy: content=‘1‘ dest=/etc/rsync.pass mode=600

    - name: Create Sripts Directory
      file: path=/server/scripts/ recurse=yes state=directory

    - name: Push Scripts
      copy: src=./scripts/rsync_backup_md5.sh  dest=/server/scripts/
 
    - name: Crontable Scripts
      cron: name="backup scripts" hour=01 minute=00 job="/usr/bin/bash /server/scripts/rsync_backup_md5.sh &>/dev/null"   

rsync.yaml

- hosts: backup
  tasks:

    - name: Install Rsync Server
      yum: name=rsync,mailx state=installed

    - name: Configure Rsync Server
      copy: src=./conf/rsyncd.conf dest=/etc/rsyncd.conf
      notify: Restart Rsync Server

    - name: Create Date
      file: path=/data state=directory  owner=www group=www mode=755

    - name: Create Backup
      file: path=/backup state=directory  owner=www group=www  mode=755

    - name: Create Virt User
      copy: content=‘rsync_backup:1‘ dest=/etc/rsync.password mode=600

    - name: Start RsyncServer
      service: name=rsyncd state=started enabled=yes

    - name: Push Check Scripts
      copy: src=./scripts/rsync_check_backup.sh dest=/server/scripts/

    - name: Crond Check Scripts
      cron: name="check scripts" hour=05 minute=00 job="/usr/bin/bash /server/scripts/rsync_check_backup.sh &>/dev/null"

  handlers:
    - name: Restart Rsync Server
      service: name=rsyncd state=restarted

nfs.yaml

- hosts: nfs
  tasks:

    - name: Installed Nfs Server
      yum: name=nfs-utils state=installed

    - name: Configure Nfs Server
      copy: src=./conf/exports dest=/etc/exports
      notify: Restart Nfs Server

    - name: Create Share Data
      file: path=/data  state=directory owner=www group=www mode=755

    - name: Create Share /data{}
      shell: mkdir /data/{wordpress,wecenter,jpress} -p

    - name: Chown -R www.www /data
      file: path=/data recurse=yes owner=www group=www

    - name: Start Nfs Server
      service: name=nfs-server state=started enabled=yes

  handlers:
    - name: Restart Nfs Server 
      service: name=nfs-server  state=restarted

sersync.yaml

- hosts: nfs
  tasks:
 
    - name: Scp Sersync
      copy: src=./file/sersync2.5.4_64bit_binary_stable_final.tar.gz dest=/usr/local/sersync.tar.gz

    - name: Zip
      shell: cd /usr/local && tar xf sersync.tar.gz && mv GNU-Linux-x86 sersync
      args:
        creates: /usr/local/sersync

    - name: configure Sersync
      copy: src=./conf/confxml.xml dest=/usr/local/sersync/confxml.xml
      notify: kill old sersync and restart new sersync

    - name: Start Sersync
      shell: pgrep sersync; 
             [ $? -eq 0 ] || /usr/local/sersync/sersync2 -dro /usr/local/sersync/confxml.xml

  handlers:
    - name:  kill old sersync and restart new sersync
      shell: pegrep sersync | xargs kill -9;
             /usr/local/sersync/sersync2 -dro /usr/local/sersync/confxml.xml

web.yaml

- hosts: web
  tasks:
#    - name: Mount NFS Server Share Date
#      mount: src=172.16.1.31:/data path=/data fstype=nfs opts=defaults state=mounted

    - name: Install Mariadb
      yum: name=mysql state=installed 

    - name: Install nginx 
      yum: name=nginx state=installed

    - name:   nginx.conf copy
      copy: src=./conf/nginx.conf dest=/etc/nginx/nginx.conf
      notify: Restart nginx

    - name: install php7.1
      yum: name=php71w,php71w-cli,php71w-common,php71w-devel,php71w-embedded,php71w-gd,php71w-mcrypt,php71w-mbstring,php71w-pdo,php71w-xml,php71w-fpm,php71w-mysqlnd,php71w-opcache,php71w-pecl-memcached,php71w-pecl-redis,php71w-pecl-mongodb state=installed

    - name: Copy  www.conf
      copy: src=./conf/www.conf dest=/etc/php-fpm.d/www.conf
      notify: Restart php-fpm      

    - name: Copy  php.ini
      copy: src=./conf/php.ini dest=/etc/php.ini
      notify: Restart php-fpm

    - name: Start php-fpm
      service: name=php-fpm state=started enabled=yes
      
   #- name: Unzip kaoshi.zip
   #   unarchive: src=./file/kaoshi.zip dest=/data/ creates=/data/index.html

    - name: Start nginx
      service: name=nginx state=started enabled=yes

    - name: Del /etc/nginx/conf.d/default.conf
      file: path=/etc/nginx/conf.d/default.conf state=absent

    - name: Copy conf.d/*
      unarchive: src=./conf/conf.zip dest=/etc/nginx/conf.d/ creates=/etc/nginx/conf.d/wecenter.conf
    
    - name: Copy ./file/ssl_key.zip
      unarchive: src=./file/ssl_key.zip dest=/etc/nginx/ creates=/etc/nginx/ssl_key/server.crt
    
    - name: Create /code
      file: path=/code/ recurse=yes state=directory mode=755 owner=www group=www

    - name: Copy /code.zip
      unarchive: src=./file/code.zip dest=/code/ creates=/code/wordpress/index.php

    - name: chown www.www /code
      file: path=/code owner=www group=www mode=0755

#    - name: Mount data
#      mount: src=172.16.1.31:/data path=/data fstype=nfs opts=defaults state=mounted

    - name: Mount wordpress
      mount: src=172.16.1.31:/data/wordpress path=/code/wordpress/wp-content/uploads fstype=nfs opts=defaults state=mounted

    - name: Mount wecenter
      mount: src=172.16.1.31:/data/wecenter path=/code/wecenter/uploads fstype=nfs opts=defaults state=mounted

    - name: Start nginx
      service: name=nginx state=started enabled=yes

#    - name: recovery data
#      shell: cp -rp /code/wecenter/uploads_bak/* /code/wecenter/uploads/ && cp -rp /code/wordpress/wp-content/uploads_bak/* /code/wordpress/wp-content/uploads/

  handlers:
    - name: Restart nginx
      service: name=nginx state=restarted enabled=yes

    - name: Restart php-fpm
      service: name=php-fpm state=restarted enabled=yes

tweb.yaml

- hosts: sweb
  tasks:
    - name: Install java jarjar
      yum: name=java,jarjar-maven-plugin state=installed
    
    - name: Create /server
      file: path=/server/scripts/ recurse=yes state=directory

    - name: Unzip tomcat8_1.zip
      unarchive: src=./file/tomcat8_1.zip dest=/server/ creates=/server/tomcat8_1/bin/startup.sh

    - name: Configgurl copy
      copy: src=./conf/server.xml dest=/server/tomcat8_1/conf/server.xml
      notify: Restart tomcat

    - name: chown www
      file: path=/server/tomcat8_1 recurse=yes owner=www group=www  

    - name: Start tomcat8_1
#      command: /server/tomcat8_1/bin/startup.sh
      shell: /server/tomcat8_1/bin/startup.sh

    - name: Mount NFS Server Share jpress
      mount: src=172.16.1.31:/data/jpress path=/server/tomcat8_1/webapps/jpress/attachment fstype=nfs opts=defaults state=mounted

#    - name: Recovery data
#      shell: cd /server/tomcat8_1/webapps/jpress && cp -rp attachment_bak/* attachment/

#    - name chown www
#      shell: chown -R www.www /server/tomcat8_1/webapps    

#  handlers:
#    - name: Restart tomcat
#      shell: /server/tomcat8_1/bin/shutdown.sh &&  /server/tomcat8_1/bin/startup.sh      

lb.yaml

- hosts: lb
  tasks:

    - name: install nginx
      yum: name=nginx state=installed

    - name: Del /etc/nginx/conf.d/default.conf
      file: path=/etc/nginx/conf.d/default.conf state=absent

    - name: Copy  ds.conf
      copy: src=./lb/ds.conf dest=/etc/nginx/conf.d/ds.conf
      notify: Restart nginx 

    - name: Copy  proxy-https.conf
      copy: src=./lb/proxy-https.conf dest=/etc/nginx/conf.d/proxy-https.conf
      notify: Restart nginx 

    - name: Copy ./file/ssl_key.zip
      unarchive: src=./file/ssl_key.zip dest=/etc/nginx/ creates=/etc/nginx/ssl_key/server.crt

    - name: Copy  proxy_params
      copy: src=./lb/proxy_params dest=/etc/nginx/proxy_params
      notify: Restart nginx 

    - name: start nginx
      service: name=nginx state=started enabled=yes

  handlers:
    - name: Restart nginx
      service: name=nginx state=restarted enabled=yes

keepalived.yaml

- hosts: lb
  tasks:

    - name: install keepalived
      yum: name=keepalived state=installed

    - name: Copy  keepalived.conf
      copy: src=./lb/keepalived.conf dest=/etc/keepalived/keepalived.conf
      notify: Restart keepalived 




    - name: start keepalived
      service: name=keepalived state=started enabled=yes

  handlers:
    - name: Restart keepalived
      service: name=keepalived state=restarted enabled=yes

keepalived2.yaml

- hosts: 172.16.1.6
  tasks:

    - name: Copy  keepalived2.conf
      copy: src=./lb/keepalived2.conf dest=/etc/keepalived/keepalived.conf
      notify: Restart keepalived 

    - name: start keepalived
      service: name=keepalived state=started enabled=yes

  handlers:
    - name: Restart keepalived
      service: name=keepalived state=restarted enabled=yes

mysql.yaml

- hosts: db
  tasks:


    - name: Install mysql-community
      yum: name=mysql-community-server state=installed

    - name: Start mysqld
      service: name=mysqld state=started enabled=yes

#    - name: copy /etc/my.cnf
#      copy: src=./conf/my.cnf dest=/etc/my.cnf

#    - name: Restart mysqld
#      service: name=mysqld state=restarted enabled=yes

#    - name: modify mysql passwd
#      shell: mysql -uroot -se "update mysql.user set authentication_string=password(‘Ckh123.com‘) where user=‘root‘;"

#    - name: modify my.cnf
#      shell: sed  ‘20s#skip-grant-tables##pg‘ /etc/my.cnf

#    - name: Restart mysqld
#      service: name=mysqld state=restarted enabled=yes

#    - name: Grant all user 
#      shell: mysql -uroot -pCkh123.com mysql -se "update user set host = ‘%‘ where user = ‘root‘;"

#    - name: flush privileges 
#      shell: mysql -uroot -p‘Ckh123.com‘ -se "flush privileges;"

#    - name: Create daabase 
#      shell: mysql -uroot -p‘Ckh123.com‘ -se "create database wordpress;"


    - name: Copy backup.sql
      copy: src=./file/2018-10-0613-mysql-all.sql dest=/tmp/

#    - name: Input mysql
#      shell: mysql -uroot -p‘Ckh123.com‘</root/2018-09-2417-mysql-all.sql 

善后操作

#4.由于mysql5.7默认配置了默认密码, 需要过滤temporary password关键字查看对应登陆数据库密码
[root@nginx ~]# grep ‘temporary password‘ /var/log/mysqld.log
#5.登陆mysql数据库[password中填写上一步过滤的密码]
[root@web02 ~]# mysql -uroot -p$(awk ‘/temporary password/{print $NF}‘ /var/log/mysqld.log)
#6.重新修改数据库密码
mysql> ALTER USER ‘root‘@‘localhost‘ IDENTIFIED BY ‘Ckh123.com‘;
# 服务器mysql允许远程用户连接 (授权法)
grant all privileges on *.* to ‘all‘@‘%‘ identified by ‘Ckh123.com‘;
flush privileges;


1.老服务器操作
#1.指定导出对应的数据库文件。
[root@web02 ~]# mysqldump -uroot -p‘Ckh123.com‘ --all-databases --single-transaction > `date +%F%H`-mysql-all.sql
#2.传输备份数据库文件至新服务器
[root@web02 zh]# scp 2018-10-0613-mysql-all.sql  root@10.0.0.51:/tmp

2.新服务器操作
#1.导入数据库
[root@db01 ~]# cd /tmp && mysql -uroot -p‘Ckh123.com‘ < 2018-10-0613-mysql-all.sql

# 手动启动tomcat8
/usr/bin/sh /server/tomcat8_1/bin/startup.sh

扩展 zip命令使用

# 当前目录下 所有文件 压缩包
[root@web01 conf.d]# zip conf.zip ./*
# -r  递归所有目录
[root@web01 conf.d]# zip -r conf.zip ./*
2.unzip
unzip -o -d /home/sunny myfile.zip
把myfile.zip文件解压到 /home/sunny/
-o:不提示的情况下覆盖文件;
-d:-d /home/sunny 指明将文件解压缩到/home/sunny目录下;

3.其他
zip -d myfile.zip smart.txt
删除压缩文件中smart.txt文件
zip -m myfile.zip ./rpm_info.txt
向压缩文件中myfile.zip中添加rpm_info.txt文件

源码下载地址

链接:https://pan.baidu.com/s/1KqE4sdDdQxhIHJyK4QFfuw 密码:cwtn

ansible_playbook 一键搭建集群架构

标签:data   ip地址   .com   smis   epel   epo   header   创建   directory   

原文地址:https://www.cnblogs.com/chengkanghua/p/9748599.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!