标签:msa 命令行配置
1、查看虚拟磁盘
# show vdisks
2、查看啟動的服務
# show protocols
3、查看IP地址:
# show network-parameters
4、设置IP地址:
set network-parameters
[ip <address>]
[netmask <netmask>]
[gateway <gateway>]
controller a|b
# set network-parameters dhcp
# set network-parameters ip 192.168.0.10 netmask 255.255.255.0
gateway 192.168.0.1 controller a
Success: Network parameters have been changed
5、更換控制器或者盤櫃后,盤櫃的ID編碼不正確(例如本來是盤櫃2,更換之後變成了盤櫃3等)
# rescan
Success: Command completed successfully
6、把offline添加到vdisk中
# trust
EXAMPLE
Enable the trust command and then trust vdisk VD1:
# trust enable
Trust Virtual-disk Enabled.
# trust vdisk VD1
Are you sure? yes
Virtual-disk VD1 has been trusted.
7、FTP刷新固件:
登陸ftp
如果發現FTP被拒絕,說明沒有enableFTP服務
put 文件名 flash
标签:msa 命令行配置
原文地址:http://304514244.blog.51cto.com/613287/1561915