Akka之BackoffSupervisor

标签：dex   tde   enc   异常处理   owa   strong   art   any   received   

一、背景

最近在开发一个项目，项目的各模块之间是使用akka grpc传输音频帧的，并且各模块中的actor分别都进行了persist。本周在开发过程中遇到了一个bug，就是音频帧在通行一段时间后，整个系统处于卡死状态，没有了反应。刚开始怀疑是akka grpc通信时，流中断了，或者没有传输过来，可是通过抓包和日志，发现流的每一帧已经接受到了。最后定位到问题时persist的原因，每次卡死之间都可以发现persit失败了。我们去看persist方法的源码可以发现上面的注解如下：

/**
 * Asynchronously persists `event`. On successful persistence, `handler` is called with the
 * persisted event. It is guaranteed that no new commands will be received by a persistent actor
 * between a call to `persist` and the execution of its `handler`. This also holds for
 * multiple `persist` calls per received command. Internally, this is achieved by stashing new
 * commands and unstashing them when the `event` has been persisted and handled. The stash used
 * for that is an internal stash which doesn‘t interfere with the inherited user stash.
 *
 * An event `handler` may close over persistent actor state and modify it. The `sender` of a persisted
 * event is the sender of the corresponding command. This means that one can reply to a command
 * sender within an event `handler`.
 *
 * Within an event handler, applications usually update persistent actor state using persisted event
 * data, notify listeners and reply to command senders.
 *
 * If persistence of an event fails, [[#onPersistFailure]] will be invoked and the actor will
 * unconditionally be stopped. The reason that it cannot resume when persist fails is that it
 * is unknown if the event was actually persisted or not, and therefore it is in an inconsistent
 * state. Restarting on persistent failures will most likely fail anyway, since the journal
 * is probably unavailable. It is better to stop the actor and after a back-off timeout start
 * it again.
 *
 * @param event event to be persisted
 * @param handler handler for each persisted `event`
 */
def persist[A](event: A)(handler: A ? Unit): Unit = {
  internalPersist(event)(handler)
}

从注解我们可以发现，我们在使用akka的persist特性时，如果持久化失败，相应的actor就会被stop掉。因此，如果你继续往它发消息是没有任何反应。并且这个注解建议我们使用Backoff来重启这个Actor。（建议，我们在把actor持久化到本地或者使用redis等插件持久化到数据库时，最好选择持久化的方法，不然会使用java持久化，会出现WARN，因为默认的java持久化效率不是很好）。因此，我们来学习一下，这种BackOff重启的方式。

二、普通的监控和重启

我们都知道Actor之间是有父子关系的，如果子Actor出现了异常，是会进行上报，并且使用策略来进行相应的处理，其中最常用的策略就是OneForOneStrategy，也就是只针对发生异常的Actor施用策略，策略中定义了对下属子级发生的各种异常的处理方式。而默认的处理方式是这样的：

final val defaultDecider: Decider = {
  case _: ActorInitializationException ? Stop
  case _: ActorKilledException ? Stop
  case _: DeathPactException ? Stop
  case _: Exception ? Restart
}

但是，我们可以加上自己的一些特殊处理方式，例如

override val supervisorStrategy =
  OneForOneStrategy(maxNrOfRetries = 10, withinTimeRange = 1 minute) {
    case _: ArithmeticException => Resume
    case _: MyException => Restart
    case t =>
      super.supervisorStrategy.decider.applyOrElse(t, (_: Any) => Escalate)
}

三、BackoffSupervisor

但是，如果我们的actor是通过system.actorOf进行启动的，我们就很难通过上述这个方式去自定义自己的异常处理方式。并且，如果我们想进行个细粒度的控制，例如在actor发生异常以后多久去处理它。这种情况我们就可以使用BackoffSupervisor去实现。

我们可以这样理解BackoffSupervisor。实际上BackoffSupervisor与定义了supervisorStrategy的Actor有所不同。我们应该把BackoffSupervisor看作是一个一体化的Actor。当然，它的实现方式还是由一对父子Actor组成。监管策略（SupervisorStrategy）是在BackoffSupervisor的内部实现的。从外表上BackoffSupervisor就像是一个Actor，运算逻辑是在子级Actor中定义的，所谓的父级Actor除监管之外没有任何其它功能，我们甚至没有地方定义父级Actor的功能，它的唯一功能是转发收到的信息给子级，是嵌入BackoffSupervisor里的。所以我们虽然发送消息给BackoffSupervisor，但实际上是在与它的子级交流。下面我们可以通过一个例子来看看怎么使用：

object InnerChild {
  case class TestMessage(msg: String)
  class ChildException extends Exception

  def props = Props[InnerChild]
}
class InnerChild extends Actor with ActorLogging {
  import InnerChild._
  override def receive: Receive = {
    case TestMessage(msg) => //模拟子级功能
      log.info(s"Child received message: ${msg}")
  }
}
object Supervisor {
  def props: Props = { //在这里定义了监管策略和child Actor构建
    def decider: PartialFunction[Throwable, SupervisorStrategy.Directive] = {
      case _: InnerChild.ChildException => SupervisorStrategy.Restart
    }

    val options = Backoff.onFailure(InnerChild.props, "innerChild", 1 second, 5 seconds, 0.0)
      .withManualReset
      .withSupervisorStrategy(
        OneForOneStrategy(maxNrOfRetries = 5, withinTimeRange = 5 seconds)(
          decider.orElse(SupervisorStrategy.defaultDecider)
        )
      )
    BackoffSupervisor.props(options)
  }
}
//注意：下面是Supervisor的父级，不是InnerChild的父级
object ParentalActor {
  case class SendToSupervisor(msg: InnerChild.TestMessage)
  case class SendToInnerChild(msg: InnerChild.TestMessage)
  case class SendToChildSelection(msg: InnerChild.TestMessage)
  def props = Props[ParentalActor]
}
class ParentalActor extends Actor with ActorLogging {
  import ParentalActor._
  //在这里构建子级Actor supervisor
  val supervisor = context.actorOf(Supervisor.props,"supervisor")
  supervisor ! BackoffSupervisor.getCurrentChild //要求supervisor返回当前子级Actor
  var innerChild: Option[ActorRef] = None   //返回的当前子级ActorRef
  val selectedChild = context.actorSelection("/user/parent/supervisor/innerChild")
  override def receive: Receive = {
    case BackoffSupervisor.CurrentChild(ref) =>   //收到子级Actor信息
      innerChild = ref
    case SendToSupervisor(msg) => supervisor ! msg
    case SendToChildSelection(msg) => selectedChild ! msg
    case SendToInnerChild(msg) => innerChild foreach(child => child ! msg)
  }

}
object BackoffSupervisorDemo extends App {
  import ParentalActor._
  val testSystem = ActorSystem("testSystem")
  val parent = testSystem.actorOf(ParentalActor.props,"parent")
  Thread.sleep(1000)   //wait for BackoffSupervisor.CurrentChild(ref) received
  parent ! SendToSupervisor(TestMessage("Hello message 1 to supervisor"))
  parent ! SendToInnerChild(TestMessage("Hello message 2 to innerChild"))
  parent ! SendToChildSelection(TestMessage("Hello message 3 to selectedChild"))
  scala.io.StdIn.readLine()
  testSystem.terminate()
}

运行结果如下：

[INFO] [10/13/2018 16:11:48.167] [testSystem-akka.actor.default-dispatcher-2] [akka://testSystem/user/parent/supervisor/innerChild] Child received message: Hello message 1 to supervisor
[INFO] [10/13/2018 16:11:48.177] [testSystem-akka.actor.default-dispatcher-2] [akka://testSystem/user/parent/supervisor/innerChild] Child received message: Hello message 2 to innerChild
[INFO] [10/13/2018 16:11:48.179] [testSystem-akka.actor.default-dispatcher-3] [akka://testSystem/user/parent/supervisor/innerChild] Child received message: Hello message 3 to selectedChild

从结果可以看出，虽然在上面的例子里我们分别向supervisor,innerChild,selectedChild发送消息。但最终所有消息都是由InnerChild响应的。

Akka之BackoffSupervisor

标签：dex   tde   enc   异常处理   owa   strong   art   any   received   

原文地址：https://www.cnblogs.com/junjiang3/p/9785373.html