11_23_success

标签：min   p12   nal   color   pow   bit   ini   read   out   

#include "mbed.h"
#include "MCP23017.h"
#include "WattBob_TextLCD.h"
#include "TCS3472_I2C.h"
#include "stdint.h"
#include "VL6180.h"
#include "rtos.h"

#define     BACK_LIGHT_ON(INTERFACE)    INTERFACE->write_bit(1,BL_BIT)
#define     BACK_LIGHT_OFF(INTERFACE)   INTERFACE->write_bit(0,BL_BIT)
#define IDENTIFICATIONMODEL_ID 0x0000
MCP23017            *par_port;
WattBob_TextLCD     *lcd;

TCS3472_I2C rgb_sensor(p9, p10);//9:data
VL6180  TOF_sensor(p28, p27);//28:data
DigitalIn Ain(p21);
DigitalIn Bin(p22);
DigitalIn Cin(p23);
DigitalIn Din(p24);

DigitalOut Servo1a(p5);
DigitalOut Servo1b(p6);

DigitalOut Servo2a(p11);
DigitalOut Servo2b(p12);
DigitalOut Servo3a(p13);
DigitalOut Servo3b(p14);

DigitalOut Servo4(p15);

DigitalOut Servo5(p20);

Serial pc(USBTX, USBRX);

Thread thread1;
Thread thread2;
Thread thread3;
Thread thread4;
Thread thread5;
Thread thread6;
Thread thread7;

void servo1_thread() 
{
    while (true) 
    {
        
        Thread::signal_wait(0x001);

        
        Servo1a = 0;
        Servo1b = 1;
        wait(0.2);
        Servo1a = 1;
        
    }
}

void servo2_thread() 
{
    while (true) 
    {
        
        Thread::signal_wait(0x010);

        Servo1a = 1;
        Servo1b = 0;
        wait(0.2);
        Servo1a = 0;
    
    }
}


void servo3_thread() 
{
    while (true) 
    {
        
        Thread::signal_wait(0x011);
        while(1)
        {
            Servo2a = 0;
            Servo2b = 0;
            wait(1);
            Servo2a = 1;
            Servo2b = 1;
            wait(1);
        }

    }
}

void servo4_thread() 
{
    while (true) 
    {
        
        Thread::signal_wait(0x011);
        while(1)
        {
            Servo3a = 0;
            Servo3b = 0;
            wait(1);
            Servo3a = 1;
            Servo3b = 1;
            wait(1);
        }
    }
}


void servo5_thread() 
{
    while (true) 
    {
        
        Thread::signal_wait(0x100);
        while(1)
        {
            Servo2a = 0;
            Servo2b = 0;
            wait(2);
            Servo2a = 1;
            Servo2b = 1;
            wait(2);
        }

    }
}

void servo6_thread() 
{
    while (true) 
    {
        
        Thread::signal_wait(0x100);
        while(1)
        {
            Servo3a = 0;
            Servo3b = 0;
            wait(2);
            Servo3a = 1;
            Servo3b = 1;
            wait(2);
        }
    }
}


void servo7_thread() 
{
    while (true) 
    {
        
        Thread::signal_wait(0x101);

        Servo5 = 0;
        wait(0.5);
        Servo5 = 1;
        wait(0.5);
        Servo5 = 0;


        Servo4 = 0;
        wait(0.5);
        Servo4 = 1;
        wait(0.5);
        Servo4 = 0;

        

    }
}

int main() 
{
    
    uint8_t dist;
    
    TOF_sensor.VL6180_Init();
    par_port = new MCP23017(p9, p10, 0x40);
    par_port->config(0x0F00, 0x0F00, 0x0F00); 

    BACK_LIGHT_ON(par_port);

    int rgb_readings[4];
    
    rgb_sensor.enablePowerAndRGBC();
    rgb_sensor.setIntegrationTime(100);
      
    char c = '/';

    while(1)
    {  
        //Distance Sensor

        while(1)
        {
            c = pc.getc();
            if(c == 's')
            {
                dist = TOF_sensor.getDistance();
                dist /= 10;
                wait(3);
                pc.printf("%d", dist);
            }
            if(c == 'o')
                break;
        }




        //Photoelectric Sensor
        //Special Ain
        while(1)
        {
            c = pc.getc();
            if(c == '1')
            {
                
            if(Ain==1&&Bin==0&&Cin==0&&Din==0)
                pc.printf("1");
            if(Ain==1&&Bin==0&&Cin==0&&Din==1)
                pc.printf("2");
            if(Ain==1&&Bin==0&&Cin==1&&Din==0)
                pc.printf("3");
            if(Ain==1&&Bin==0&&Cin==1&&Din==1)
                pc.printf("4");
            if(Ain==1&&Bin==1&&Cin==0&&Din==0)
                pc.printf("5");
            if(Ain==1&&Bin==1&&Cin==0&&Din==1)
                pc.printf("6");
            if(Ain==1&&Bin==1&&Cin==1&&Din==0)
                pc.printf("7");
            if(Ain==1&&Bin==1&&Cin==1&&Din==1)
                pc.printf("8");
            if(Ain==0&&Bin==0&&Cin==0&&Din==0)
                pc.printf("9");
            if(Ain==0&&Bin==0&&Cin==0&&Din==1)
                pc.printf("10");
            if(Ain==0&&Bin==0&&Cin==1&&Din==0)
                pc.printf("11");
            if(Ain==0&&Bin==0&&Cin==1&&Din==1)
                pc.printf("12");
            if(Ain==0&&Bin==1&&Cin==0&&Din==0)
                pc.printf("13");
            if(Ain==0&&Bin==1&&Cin==0&&Din==1)
                pc.printf("14");
            if(Ain==0&&Bin==1&&Cin==1&&Din==0)
                pc.printf("15");
            if(Ain==0&&Bin==1&&Cin==1&&Din==1)
                pc.printf("16");
            }
            if(c == '2')
                break;
            
        }


        //Color Sensor
        while(1)
        {
            c = pc.getc();
            if(c == 'a')
            {      
                rgb_sensor.getAllColors(rgb_readings);

                if(rgb_readings[1]>rgb_readings[2]&&rgb_readings[1]>rgb_readings[3])
                {
                    pc.printf("r");
                    continue;
                }

                          
                if(rgb_readings[2]>rgb_readings[1]&&rgb_readings[2]>rgb_readings[3])
                {
                    pc.printf("g");
                    continue;
                }
                    
                if(rgb_readings[3]>rgb_readings[1]&&rgb_readings[3]>rgb_readings[2])
                {
                    pc.printf("b");
                    continue;
                }
            }

            if(c == 'b')
            {
                break;
            }    
        }


        //Servo
        while(1)
        {
            thread1.start(servo1_thread);
            thread2.start(servo2_thread);

            thread7.start(servo7_thread);
            c = pc.getc();

            if(c == 'e')
            {
                thread5.start(servo5_thread);
                thread6.start(servo6_thread);
                thread5.signal_set(0x100);
                thread6.signal_set(0x100);
            }

            if(c == 'h')
            {
                thread3.start(servo3_thread);
                thread4.start(servo4_thread);
                thread3.signal_set(0x011);
                thread4.signal_set(0x011);
            }

            if(c == 'l')
            {
                
                thread1.signal_set(0x001);

            }
                
            if(c == 'r')
            {

                thread2.signal_set(0x010);
            
            }
                
            
            //if sensor detected
            //Undo
            if(c == 's')
            {
                thread1.terminate( );
                thread2.terminate( );
                thread3.terminate( );
                thread4.terminate( );
                thread5.terminate( );
                thread6.terminate( );


                thread7.signal_set(0x101);
                wait(6);
                thread7.terminate( );

            }


            //C_sharp sent 'f' if time is up
            if(c == 'f')
            {
                //Rotate the servo to reset the ball
                thread1.terminate( );
                thread2.terminate( );
                thread3.terminate( );
                thread4.terminate( );
                thread5.terminate( );
                thread6.terminate( );


                thread7.signal_set(0x101);
                wait(6);
                thread7.terminate( );

            }

        }


    }

    
}

11_23_success

标签：min   p12   nal   color   pow   bit   ini   read   out   

原文地址：https://www.cnblogs.com/ronnielee/p/10009213.html