码迷,mamicode.com
首页 > 其他好文 > 详细

LeetCode 376. Wiggle Subsequence

时间:2018-12-03 22:57:23      阅读:314      评论:0      收藏:0      [点我收藏+]

标签:his   and   表示   ges   cal   etc   called   origin   main   

A sequence of numbers is called a wiggle sequence if the differences between successive numbers strictly alternate between positive and negative. The first difference (if one exists) may be either positive or negative. A sequence with fewer than two elements is trivially a wiggle sequence.

For example, [1,7,4,9,2,5] is a wiggle sequence because the differences (6,-3,5,-7,3) are alternately positive and negative. In contrast, [1,4,7,2,5] and [1,7,4,5,5] are not wiggle sequences, the first because its first two differences are positive and the second because its last difference is zero.

Given a sequence of integers, return the length of the longest subsequence that is a wiggle sequence. A subsequence is obtained by deleting some number of elements (eventually, also zero) from the original sequence, leaving the remaining elements in their original order.

Examples:

Input: [1,7,4,9,2,5]
Output: 6
The entire sequence is a wiggle sequence.

Input: [1,17,5,10,13,15,10,5,16,8]
Output: 7
There are several subsequences that achieve this length. One is [1,17,10,13,10,16,8].

Input: [1,2,3,4,5,6,7,8,9]
Output: 2

分析

up[i]表示以nums[i]以结尾且上升的状态时的最长子列,down[i]表示以nums[i]以结尾且下降的状态时的最长子列。动态分析根据状态来写状态转移方程。如果nums[i]>nums[i-1], up[i]=down[i-1]+1, down[i]=down[i-1]. 如果nums[i]<nums[i-1],up[i]=up[i-1],down[i]=up[i-1]+1; 如果nums[i]==nums[i-1], up[i]=up[i-1], down[i]=down[i-1].

class Solution {
public:
    int wiggleMaxLength(vector<int>& nums) {
        if(nums.size()==0) return 0;
        vector<int> up(nums.size()),down(nums.size());
        up[0]=down[0]=1;
        for(int i=1;i<nums.size();i++){
            if(nums[i]>nums[i-1]){
                up[i]=down[i-1]+1;
                down[i]=down[i-1];
            }else if(nums[i]<nums[i-1]){
                up[i]=up[i-1];
                down[i]=up[i-1]+1;
            }else{
                up[i]=up[i-1];
                down[i]=down[i-1];
            }
         }
        return max(up[nums.size()-1],down[nums.size()-1]);
    }
};

LeetCode 376. Wiggle Subsequence

标签:his   and   表示   ges   cal   etc   called   origin   main   

原文地址:https://www.cnblogs.com/A-Little-Nut/p/10061261.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!