标签：ipad config 变更 gate nbsp 配置 ns3 生成 cmd
步骤:
1.编辑grub文件如下:
[root@node-4 ~]# vi /etc/sysconfig/grub
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="$(sed ‘s, release .*$,,g‘ /etc/system-release)"
GRUB_DEFAULT=saved
GRUB_DISABLE_SUBMENU=true
GRUB_TERMINAL_OUTPUT="console"
GRUB_CMDLINE_LINUX="rd.lvm.lv=centos_node-4/root rd.lvm.lv=centos_node-4/swap net.ifnames=0 biosdevname=0 rhgb quiet" //标红内容为添加内容
GRUB_DISABLE_RECOVERY="true"
[root@node-4 ~]# grub2-mkconfig -o /boot/grub2/grub.cfg //重新生成配置文件
2.修改网卡配置文件
[root@node-4 ~]# mv /etc/sysconfig/network-scripts/ifcfg-ens33 /etc/sysconfig/network-scripts/ifcfg-eth0
[root@node-4 ~]# vi /etc/sysconfig/network-scripts/ifcfg-eth0
TYPE="Ethernet"
BOOTPROTO="none"
DEFROUTE="yes"
NAME="eth0"
IPADDR="192.168.1.50"
NETMASK="255.255.255.0"
GATEWAY="192.168.1.1"
DNS1="8.8.8.8"
DNS2="8.8.4.4"
DEVICE="eth0"
ONBOOT="yes"
3.重启服务器,查看已经变为eth0
[root@node-4 ~]# ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.50 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::20c:29ff:fe18:2b8d prefixlen 64 scopeid 0x20<link>
ether 00:0c:29:18:2b:8d txqueuelen 1000 (Ethernet)
RX packets 59 bytes 7681 (7.5 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 89 bytes 12549 (12.2 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
故障说明:如果重启还没变更过来,删除/etc/udev/rules.d/70-persistent-ipoib.rules后重启即可.
[root@node-4 ~]# vi /etc/udev/rules.d/70-persistent-ipoib.rules
标签：ipad config 变更 gate nbsp 配置 ns3 生成 cmd
原文地址：https://www.cnblogs.com/networking/p/10200337.html
