标签：div html 调用 sed proxy run post test tpi
marathon-lb
官方：https://github.com/mesosphere/marathon-lb
Marathon load balancer (Marathon-LB) is a proxy server and load balancer for TCP, HTTP, and HTTPS requests based on HAProxy open-source software.
marathon-lb是一个基于HAProxy的代理服务器和负载均衡器，支持TCP、HTTP、HTTPS请求；
When your app is up and running, you need a way to send traffic to it, from other applications on the same cluster, and from external clients.
There are several ways to do this:
当应用启动之后，需要一种方式使得其能够被调用方自动发现并发送请求，有两种方式可以实现：Mesos-DNS和Marathon-lb；
Marathon-LB locates applications through the Marathon framework port-based service discovery using a virtual or DNS-defined IP address and the frontend and backend configuration settings specified for the HAProxy program.
If you install and configure Marathon-LB, the load balancer runs the HAProxy TCP/HTTP proxy service on each host in the cluster. The HAProxy service listens for inbound connection requests on a service port on a public agent node. If clients connect to the service port to request access to an app, the HAProxy service transparently forwards the requests to a host name and port number associated with the individual application instances orchestrated by the Marathon service.
marathon-lb通过marathon框架基于端口的服务发现来定位应用，并且自动生成haproxy配置；
$ docker run -d --privileged -e PORTS=9090 --net=host docker.io/mesosphere/marathon-lb sse -m http://marathon1_ip:8080 -m http://marathon2_ip:8080 -m http://master3_ip:8080 --group external
# cat marathon-lb.json
{
"id":"marathon-lb",
"cpus": 1,
"mem": 128,
"instances": 1,
"constraints": [["hostname", "UNIQUE"]],
"container": {
"type":"DOCKER",
"docker": {
"image": "mesosphere/marathon-lb",
"privileged": true,
"network": "HOST"
}
},
"args": ["sse", "-m", "http://192.168.0.1:8080", "-m", "http://192.168.0.2:8080", "-m", "http://192.168.0.3:8080", "--group", "external"]
}
# curl -X POST http://192.168.0.1:8080/v2/apps -d@/path/to/marathon-lb.json -H "Content-type:application/json"
启动之后会绑定如下端口
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 23948/haproxy
tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 23948/haproxy
tcp 0 0 0.0.0.0:9090 0.0.0.0:* LISTEN 23948/haproxy
tcp 0 0 0.0.0.0:9091 0.0.0.0:* LISTEN 23948/haproxy
访问：http://$marathon-lb_server:9090/haproxy?stats
haproxy常用接口如下：
http://$haproxy_server:9090/haproxy?stats
http://$haproxy_server:9090/_haproxy_health_check
http://$haproxy_server:9090/_haproxy_getconfig
详细接口如下：
monitor-uri /_haproxy_health_check
acl getpid path /_haproxy_getpids
http-request use-service lua.getpids if getpid
acl getvhostmap path /_haproxy_getvhostmap
http-request use-service lua.getvhostmap if getvhostmap
acl getappmap path /_haproxy_getappmap
http-request use-service lua.getappmap if getappmap
acl getconfig path /_haproxy_getconfig
http-request use-service lua.getconfig if getconfigacl signalmlbhup path /_mlb_signal/hup
http-request use-service lua.signalmlbhup if signalmlbhup
acl signalmlbusr1 path /_mlb_signal/usr1
http-request use-service lua.signalmlbusr1 if signalmlbusr1
后端marathon application配置
"labels": {
"HAPROXY_0_MODE": "http",
"HAPROXY_0_BALANCE": "roundrobin",
"HAPROXY_0_GROUP": "external",
"HAPROXY_0_VHOST": "service-test.com"
},
...
"portMappings":[{"containerPort":80,"hostPort":0,"servicePort":10080,"protocol":"tcp"}]
其中HAPROXY_0_MODE默认为http，HAPROXY_0_BALANCE默认为roundrobin；生成的haproxy配置路径如下：
/marathon-lb/haproxy.cfg
然后可以通过 $marathon-lb_server:10080 来访问实际的一个或多个后端 $backend_server:80
后端marathon application配置
"labels": {
"HAPROXY_0_MODE": "tcp",
"HAPROXY_0_GROUP": "external"
},
...
"portMappings":[{"containerPort":6379,"hostPort":0,"servicePort":16379,"protocol":"tcp"}]
注意：HAPROXY_0_MODE=tcp时一定不要配置HAPROXY_0_VHOST（http mode时使用），否则会生成错误的haproxy配置导致marathon-lb启动失败
然后可以通过 $marathon-lb_server:16379 来访问实际的一个或多个后端 $backend_server:6379
参考：
https://docs.mesosphere.com/services/marathon-lb/
https://mesosphere.github.io/marathon/docs/service-discovery-load-balancing.html
【原创】大数据基础之Marathon（2）marathon-lb
标签：div html 调用 sed proxy run post test tpi
原文地址：https://www.cnblogs.com/barneywill/p/10393164.html
