码迷，mamicode.com
首页 > 其他好文 > 详细

docker-compose安装redis-sentinel集群（1主+2副+2哨兵）

时间：2019-03-04 17:38:09      阅读：251      评论：0      收藏：0      [点我收藏+]

标签：tor   file   localhost   mamicode   status   fail   restart   priority   阿里   

前提：本试验环境已经提前安装了docker和docker-compose

说明：本次部署是单机伪集群，想要部署真正的集群，需要将秒个主件拆分到各个机器上去部署，只修改ip地址

1、下载redis的相关镜像

本人已经将做好的redis镜像放到阿里云的仓库了，要下载，直接执行下面的命令即可

docker pull registry.cn-hangzhou.aliyuncs.com/boshen-ns/redis-sentinel:3
docker pull registry.cn-hangzhou.aliyuncs.com/boshen-ns/redis:3

技术图片

2、创建redis的data目录，主要是为了持久化保存redis的数据

mkdir -p /home/redis-sentinel-cluster/data/master
mkdir -p /home/redis-sentinel-cluster/data/slave1
mkdir -p /home/redis-sentinel-cluster/data/slave2
mkdir -p /home/redis-sentinel-cluster/data/sentinel-1
mkdir -p /home/redis-sentinel-cluster/data/sentinel-2

3、创建2个哨兵的配置文件 （集群启动后会自动更新该配置文件 ）

/home/redis-sentinel-cluster/sentinel-1.conf
port 26379

dir "/data"
sentinel monitor mymaster 172.16.1.11 16379 2
sentinel down-after-milliseconds mymaster 5000
sentinel failover-timeout mymaster 5000
sentinel parallel-syncs mymaster 1
/home/redis-sentinel-cluster/sentinel-2.conf
port 26380

dir "/data"
sentinel monitor mymaster 172.16.1.11 16379 2
sentinel down-after-milliseconds mymaster 5000
sentinel failover-timeout mymaster 5000
sentinel parallel-syncs mymaster 1

1）monitor     指的是初始化的监控主切点，ip和端口，后面的数字2代表，必须2个sentinel才能判断主节点是否失败

2）down-after-milliseconds   指的是超过5000秒，且没有回复，则判定主节点不可达

3）failover-timeout    指的是故障转移时间

4）parallel-syncs   指的是故障转移到新的主节点时，从节点的复制节点数量

 

4、创建 /home/redis-sentinel-cluster/docker-compose.yml

version: ‘2.1‘
services:
  master:
    image: registry.cn-hangzhou.aliyuncs.com/boshen-ns/redis:3
    container_name: master
    restart: always
    network_mode: "host"
    volumes:
      - ./data/master:/data
    command: redis-server --port 16379
  slave1:
    image: registry.cn-hangzhou.aliyuncs.com/boshen-ns/redis:3
    container_name: slave1
    restart: always
    network_mode: "host"
    volumes:
      - ./data/slave1:/data
    command: redis-server --port 16380 --slaveof 172.16.1.11 16379
  slave2:
    image: registry.cn-hangzhou.aliyuncs.com/boshen-ns/redis:3
    container_name: slave2
    restart: always
    network_mode: "host"
    volumes:
      - ./data/slave2:/data
    command: redis-server --port 16381 --slaveof 172.16.1.11 16379
  sentinel-1:
    image: registry.cn-hangzhou.aliyuncs.com/boshen-ns/redis-sentinel:3
    container_name: sentinel-1
    restart: always
    network_mode: "host"
    volumes:
      - ./sentinel-1.conf:/etc/redis/sentinel.conf
      - ./data/sentinel-1:/data
  sentinel-2:
    image: registry.cn-hangzhou.aliyuncs.com/boshen-ns/redis-sentinel:3
    container_name: sentinel-2
    restart: always
    network_mode: "host"
    volumes:
      - ./sentinel-2.conf:/etc/redis/sentinel.conf
      - ./data/sentinel-2:/data

5、启动redis集群

cd /home/redis-sentinel-cluster
docker-compose up -d

技术图片

6、验证集群

1）连接基本一个sentinel

docker exec -it sentinel-1 redis-cli -h 172.16.1.11 -p 26379

2) 查看基本信息

172.16.1.11:26379> info
# Server
redis_version:3.2.12
redis_git_sha1:00000000
redis_git_dirty:0
redis_build_id:b0df607ad3315254
redis_mode:sentinel
os:Linux 3.10.0-693.el7.x86_64 x86_64
arch_bits:64
multiplexing_api:epoll
gcc_version:6.3.0
process_id:1
run_id:ff490c3e11d3b9f8c4ca6fd2456c4d2cffa20bdc
tcp_port:26379
uptime_in_seconds:4022
uptime_in_days:0
hz:15
lru_clock:8184650
executable:/data/redis-server
config_file:/etc/redis/sentinel.conf

# Clients
connected_clients:2
client_longest_output_list:0
client_biggest_input_buf:0
blocked_clients:0

# CPU
used_cpu_sys:4.11
used_cpu_user:3.45
used_cpu_sys_children:0.01
used_cpu_user_children:0.00

# Stats
total_connections_received:3
total_commands_processed:5826
instantaneous_ops_per_sec:1
total_net_input_bytes:323533
total_net_output_bytes:36329
instantaneous_input_kbps:0.13
instantaneous_output_kbps:0.01
rejected_connections:0
sync_full:0
sync_partial_ok:0
sync_partial_err:0
expired_keys:0
evicted_keys:0
keyspace_hits:0
keyspace_misses:0
pubsub_channels:0
pubsub_patterns:0
latest_fork_usec:0
migrate_cached_sockets:0

# Sentinel
sentinel_masters:1
sentinel_tilt:0
sentinel_running_scripts:0
sentinel_scripts_queue_length:0
sentinel_simulate_failure_flags:0
master0:name=mymaster,status=ok,address=172.16.1.11:16379,slaves=2,sentinels=2

3）相看master

172.16.1.11:26379> sentinel masters
1)  1) "name"
    2) "mymaster"
    3) "ip"
    4) "172.16.1.11"
    5) "port"
    6) "16379"
    7) "runid"
    8) "657bd7c958c8a2267efd5d0148eac74db6dac780"
    9) "flags"
   10) "master"
   11) "link-pending-commands"
   12) "0"
   13) "link-refcount"
   14) "1"
   15) "last-ping-sent"
   16) "0"
   17) "last-ok-ping-reply"
   18) "1025"
   19) "last-ping-reply"
   20) "1025"
   21) "down-after-milliseconds"
   22) "5000"
   23) "info-refresh"
   24) "4163"
   25) "role-reported"
   26) "master"
   27) "role-reported-time"
   28) "4209375"
   29) "config-epoch"
   30) "0"
   31) "num-slaves"
   32) "2"
   33) "num-other-sentinels"
   34) "1"
   35) "quorum"
   36) "2"
   37) "failover-timeout"
   38) "5000"
   39) "parallel-syncs"
   40) "1"

4)查看slaves

172.16.1.11:26379> sentinel slaves mymaster
1)  1) "name"
    2) "172.16.1.11:16380"
    3) "ip"
    4) "172.16.1.11"
    5) "port"
    6) "16380"
    7) "runid"
    8) "07c0f9d673db676594da6ec38f12d9e7bbea32b2"
    9) "flags"
   10) "slave"
   11) "link-pending-commands"
   12) "0"
   13) "link-refcount"
   14) "1"
   15) "last-ping-sent"
   16) "0"
   17) "last-ok-ping-reply"
   18) "759"
   19) "last-ping-reply"
   20) "759"
   21) "down-after-milliseconds"
   22) "5000"
   23) "info-refresh"
   24) "4278"
   25) "role-reported"
   26) "slave"
   27) "role-reported-time"
   28) "4319936"
   29) "master-link-down-time"
   30) "0"
   31) "master-link-status"
   32) "ok"
   33) "master-host"
   34) "172.16.1.11"
   35) "master-port"
   36) "16379"
   37) "slave-priority"
   38) "100"
   39) "slave-repl-offset"
   40) "584317"
2)  1) "name"
    2) "172.16.1.11:16381"
    3) "ip"
    4) "172.16.1.11"
    5) "port"
    6) "16381"
    7) "runid"
    8) "6a1038dc76a386fe4137fe22f1dca7286f0774c6"
    9) "flags"
   10) "slave"
   11) "link-pending-commands"
   12) "0"
   13) "link-refcount"
   14) "1"
   15) "last-ping-sent"
   16) "0"
   17) "last-ok-ping-reply"
   18) "759"
   19) "last-ping-reply"
   20) "759"
   21) "down-after-milliseconds"
   22) "5000"
   23) "info-refresh"
   24) "4278"
   25) "role-reported"
   26) "slave"
   27) "role-reported-time"
   28) "4319936"
   29) "master-link-down-time"
   30) "0"
   31) "master-link-status"
   32) "ok"
   33) "master-host"
   34) "172.16.1.11"
   35) "master-port"
   36) "16379"
   37) "slave-priority"
   38) "100"
   39) "slave-repl-offset"
   40) "584317"

5)连接master，并存入一个key和value

[root@localhost redis-sentinel-cluster]# docker exec -it master redis-cli -h 172.16.1.11 -p 16379
172.16.1.11:16379> set boshen_name boshenboshen
OK

6)连接slave1，获取boshen_name的值

[root@localhost redis-sentinel-cluster]# 
[root@localhost redis-sentinel-cluster]# docker exec -it slave1 redis-cli -h 172.16.1.11 -p 16380
172.16.1.11:16380> get boshen_name
"boshenboshen"
172.16.1.11:16380>

技术图片

由报错可知，从节点，不能写数据

7) 停掉master容器，查看是否能切换主节点

技术图片

技术图片

由以上结果可知：master节点迁移到了slave1上

 

docker-compose安装redis-sentinel集群（1主+2副+2哨兵）

标签：tor   file   localhost   mamicode   status   fail   restart   priority   阿里   

原文地址：https://www.cnblogs.com/boshen-hzb/p/10471665.html
踩
(0)
赞
(0)
   
举报
评论 一句话评论（0）
登录后才能评论！
分享档案
更多>
2021年07月29日 (22)
2021年07月28日 (40)
2021年07月27日 (32)
2021年07月26日 (79)
2021年07月23日 (29)
2021年07月22日 (30)
2021年07月21日 (42)
2021年07月20日 (16)
2021年07月19日 (90)
2021年07月16日 (35)
周排行
mamicode.com排行更多图片
更多
友情链接
兰亭集智   国之画   百度统计   站长统计   阿里云   chrome插件   新版天听网
关于我们 - 联系我们 - 留言反馈
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码！