K8S 1.13.4安装部署

标签：.bashrc   lld   account   discovery   etc   use   登陆   inf   kubectl   

1、前期准备
主机准备：
k8s1 master 192.168.4.35 CentOS7.6 4C8G
k8s2 node1 192.168.4.36 CentOS7.6 4C8G
k8s3 node2 192.168.4.37 CentOS7.6 4C8G

修改hosts文件，添加host：

vi /etc/hosts

192.168.4.35  k8s1
192.168.4.36  k8s1
192.168.4.37  k8s1

关闭防火墙：
Systemctl disable firewalld && systemctl stop firewalld

命令补全：

yum install -y bash-completion
source /usr/share/bash-completion/bash_completion
source <(kubectl completion bash)
echo "source <(kubectl completion bash)" >> ~/.bashrc

2、 环境准备：

设置kubernetes的yum源

vi /etc/yum.repos.d/kubernetes.repo

[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg

设置docker的yum源

wget http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
cp docker-ce.repo /etc/yum.repos.d/

安装docker和kubeadmin kubectl kubelet
yum install -y kubelet kubeadm kubectl docker-ce

设置开机启动并启动服务
systemctl enable kubelet docker
systemctl start kubelet docker
查看该版本的容器镜像版本：
kubeadm config images list
输出如下：

~# kubeadm config images list
k8s.gcr.io/kube-apiserver:v1.13.4
k8s.gcr.io/kube-controller-manager:v1.13.4
k8s.gcr.io/kube-scheduler:v1.13.4
k8s.gcr.io/kube-proxy:v1.13.4
k8s.gcr.io/pause:3.1
k8s.gcr.io/etcd:3.2.24
k8s.gcr.io/coredns:1.2.6 

3、拉取容器镜像

原始的kubernetes镜像文件在gcr上，不能直接下载。下面是阿里云上的资源，所有主机上都执行一下。参考https://www.520mwx.com/view/37277

echo ""
echo "=========================================================="
echo "Pull Kubernetes v1.13.4 Images from aliyuncs.com ......"
echo "=========================================================="
echo ""
MY_REGISTRY=registry.cn-hangzhou.aliyuncs.com/openthings
## 拉取镜像
docker pull ${MY_REGISTRY}/k8s-gcr-io-kube-apiserver:v1.13.4
docker pull ${MY_REGISTRY}/k8s-gcr-io-kube-controller-manager:v1.13.4
docker pull ${MY_REGISTRY}/k8s-gcr-io-kube-scheduler:v1.13.4
docker pull ${MY_REGISTRY}/k8s-gcr-io-kube-proxy:v1.13.4
docker pull ${MY_REGISTRY}/k8s-gcr-io-etcd:3.2.24
docker pull ${MY_REGISTRY}/k8s-gcr-io-pause:3.1
docker pull ${MY_REGISTRY}/k8s-gcr-io-coredns:1.2.6
## 添加Tag
docker tag ${MY_REGISTRY}/k8s-gcr-io-kube-apiserver:v1.13.4 k8s.gcr.io/kube-apiserver:v1.13.4
docker tag ${MY_REGISTRY}/k8s-gcr-io-kube-scheduler:v1.13.4 k8s.gcr.io/kube-scheduler:v1.13.4
docker tag ${MY_REGISTRY}/k8s-gcr-io-kube-controller-manager:v1.13.4 k8s.gcr.io/kube-controller-manager:v1.13.4
docker tag ${MY_REGISTRY}/k8s-gcr-io-kube-proxy:v1.13.4 k8s.gcr.io/kube-proxy:v1.13.4
docker tag ${MY_REGISTRY}/k8s-gcr-io-etcd:3.2.24 k8s.gcr.io/etcd:3.2.24
docker tag ${MY_REGISTRY}/k8s-gcr-io-pause:3.1 k8s.gcr.io/pause:3.1
docker tag ${MY_REGISTRY}/k8s-gcr-io-coredns:1.2.6 k8s.gcr.io/coredns:1.2.6
##删除镜像
docker rmi ${MY_REGISTRY}/k8s-gcr-io-kube-apiserver:v1.13.4
docker rmi ${MY_REGISTRY}/k8s-gcr-io-kube-controller-manager:v1.13.4
docker rmi ${MY_REGISTRY}/k8s-gcr-io-kube-scheduler:v1.13.4
docker rmi ${MY_REGISTRY}/k8s-gcr-io-kube-proxy:v1.13.4
docker rmi ${MY_REGISTRY}/k8s-gcr-io-etcd:3.2.24
docker rmi ${MY_REGISTRY}/k8s-gcr-io-pause:3.1
docker rmi ${MY_REGISTRY}/k8s-gcr-io-coredns:1.2.6

echo ""
echo "=========================================================="
echo "Pull Kubernetes v1.13.4 Images FINISHED."
echo "into registry.cn-hangzhou.aliyuncs.com/openthings, "
echo "=========================================================="
echo "" 

保存为shell脚本，然后执行。

4、安装Kubernetes集群

初始化
#指定IP地址，1.13.4版本：
kubeadm init --kubernetes-version=v1.13.4 --pod-network-cidr=10.244.0.0/16
#注意，CoreDNS已经内置，不再需要参数--feature-gates CoreDNS=true
如果失败可以执行 kubeadm reset进行重置再执行上面的命令。

完成后会显示如下信息：

Your Kubernetes master has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

You can now join any number of machines by running the following on each node
as root:

kubeadm join 192.168.4.35:6443 --token b99a00.a144ef80536d4344 --discovery-token-ca-cert-hash sha256:f79b68fb698c92b9336474eb3bf184e847f967dc58a6296911892662b98b1315

然后，配置当前用户环境：

mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

如果不执行这一步，会提示x509错误

node节点注册到master（node节点执行）：
kubeadm join 192.168.4.35:6443 --token b99a00.a144ef80536d4344 --discovery-token-ca-cert-hash sha256:f79b68fb698c92b9336474eb3bf184e847f967dc58a6296911892662b98b1315

在master节点查看节点信息，可以看到node1和node2已经加入集群了：
kubectl get nodes
由于缺少flannel组件，所以status都显示NotReady。

安装flannel组件

docker pull registry.cn-hangzhou.aliyuncs.com/gaven_k8s/flannel:v0.11.0-amd64
docker tag registry.cn-hangzhou.aliyuncs.com/gaven_k8s/flannel:v0.11.0-amd64 quay.io/coreos/flannel:v0.11.0-amd64
docker rmi registry.cn-hangzhou.aliyuncs.com/gaven_k8s/flannel:v0.11.0-amd64
kubectl apply -f https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml

就可以使用 kubectl version 来查看状态和 kubectl cluster-info 查看服务地址。

在master上检查群集的状态
kubectl get nodes -o wide
查看status是否都是ready
在master上检查容器的运行状况
kubectl get pods --all-namespaces -o wide
查看status是否都是running
如果发现有容器状态不是running，可以使用下面命令查看events：
kubectl describe pod kube-flannel-ds-amd64-XXXXX -n kube-system

5、节点查看
每个工作节点需要拉取上面对应版本的镜像，以及安装kubelet的对应版本。
检查版本：
~$ kubectl version

6、安装dashboard 图形化管理平台。

部署dashboard应用资源

docker pull mirrorgooglecontainers/kubernetes-dashboard-amd64:v1.10.1
docker tag mirrorgooglecontainers/kubernetes-dashboard-amd64:v1.10.1 k8s.gcr.io/kubernetes-dashboard-amd64:v1.10.1
docker rmi mirrorgooglecontainers/kubernetes-dashboard-amd64:v1.10.1
kubectl apply -f https://raw.githubusercontent.com/kubernetes/dashboard/v1.10.1/src/deploy/recommended/kubernetes-dashboard.yaml

修改为NodePort类型的service，让集群外部也可以访问dashboard：

kubectl patch svc kubernetes-dashboard -p ‘{"spec":{"type":"NodePort"}}‘ -n kube-system

使用token认证进行登陆

kubectl create serviceaccount dashboard-admin -n kube-system
kubectl create clusterrolebinding cluster-dashboard-admin --clusterrole=cluster-admin --serviceaccount=kube-system:dashboard-admin
kubectl get secrets -n kube-system
kubectl describe secret dashboard-admin-token-rb2xh -n kube-system

dashboard-admin-token-xxxxx 安装的设备不一样，xxxxx也不一样，
-n kube-system是指定空间，如果没有加上会提示错误。
然后复制token值进行登陆即可。

K8S 1.13.4安装部署

标签：.bashrc   lld   account   discovery   etc   use   登陆   inf   kubectl   

原文地址：https://blog.51cto.com/489807/2359711