标签：group state spro %s 多个 clu format 请求 file
副本的失败处理对理解ES的数据副本模型很有帮助。在ES6.3.2 index操作源码流程的总结中提到：ES的写操作会先写主分片，然后主分片再将操作同步到副本分片。本文给出ES中的源码片断，分析副本执行操作失败时，ES是如何处理的。
副本执行源码：replicasProxy.performOn实现了副本操作，执行正常结束回调onResponse()，异常回调onFailure()
replicasProxy.performOn(shard, replicaRequest, globalCheckpoint, new ActionListener<ReplicaResponse>() {
@Override
public void onResponse(ReplicaResponse response) {
successfulShards.incrementAndGet();
try {
primary.updateLocalCheckpointForShard(shard.allocationId().getId(), response.localCheckpoint());//执行成功回调更新检查点
primary.updateGlobalCheckpointForShard(shard.allocationId().getId(), response.globalCheckpoint());
} catch (final AlreadyClosedException e) {
// okay, the index was deleted or this shard was never activated after a relocation; fall through and finish normally
} catch (final Exception e) {
// fail the primary but fall through and let the rest of operation processing complete
final String message = String.format(Locale.ROOT, "primary failed updating local checkpoint for replica %s", shard);
primary.failShard(message, e);
}
decPendingAndFinishIfNeeded();//不管是正常的onResponse还是异常的onFailure,都会调用这个方法,代表已经完成了一个操作,pendingActions减1
}
@Override
public void onFailure(Exception replicaException) {
logger.trace(() -> new ParameterizedMessage(
"[{}] failure while performing [{}] on replica {}, request [{}]",
shard.shardId(), opType, shard, replicaRequest), replicaException);
// Only report "critical" exceptions - TODO: Reach out to the master node to get the latest shard state then report.
if (TransportActions.isShardNotAvailableException(replicaException) == false) {
RestStatus restStatus = ExceptionsHelper.status(replicaException);
shardReplicaFailures.add(new ReplicationResponse.ShardInfo.Failure(
shard.shardId(), shard.currentNodeId(), replicaException, restStatus, false));
}
String message = String.format(Locale.ROOT, "failed to perform %s on replica %s", opType, shard);
//---> failShardIfNeeded 具体执行何种操作要看 replicasProxy的真正实现类:如果是WriteActionReplicasProxy则会报告shard错误
replicasProxy.failShardIfNeeded(shard, message,
replicaException, ReplicationOperation.this::decPendingAndFinishIfNeeded,
ReplicationOperation.this::onPrimaryDemoted, throwable -> decPendingAndFinishIfNeeded());
}
});
}successfulShards.incrementAndGet();，在返回的结果里面，_shards 字段里面就能看到 successful 数值。
更新 local checkpoint 和 global checkpoint：如果检查点更新失败，触发：replica shard engine 关闭。
/**
* Fails the shard and marks the shard store as corrupted if
* <code>e</code> is caused by index corruption
*
* org.elasticsearch.index.shard.IndexShard#failShard
*/
public void failShard(String reason, @Nullable Exception e) {
// fail the engine. This will cause this shard to also be removed from the node's index service.
getEngine().failEngine(reason, e);
}fail engine due to some error. the engine will also be closed.
The underlying store is marked corrupted iff failure is caused by index corruption
关于检查点，可参考这篇文章：elasticsearch-sequence-ids-6-0
replicasProxy.failShardIfNeeded(shard, message,
replicaException, ReplicationOperation.this::decPendingAndFinishIfNeeded,
ReplicationOperation.this::onPrimaryDemoted, throwable -> decPendingAndFinishIfNeeded());failShardIfNeeded 可以做2件事情，具体是如何执行得看failShardIfNeeded的实现类。
onPrimaryDemoted
通知master primary stale（过时）了。index操作首先在primary shard执行成功了，然后同步给replica，但是replica发现此primary shard 的 primary term 比它知道的该索引的primary term 还小，于是replica就认为此primary shard是一个已经过时了的primary shard，因此就回调onFailure()拒绝执行，并执行onPrimaryDemoted通知master节点。
private void onPrimaryDemoted(Exception demotionFailure) {
String primaryFail = String.format(Locale.ROOT,
"primary shard [%s] was demoted while failing replica shard",
primary.routingEntry());
// we are no longer the primary, fail ourselves and start over
primary.failShard(primaryFail, demotionFailure);
finishAsFailed(new RetryOnPrimaryException(primary.routingEntry().shardId(), primaryFail, demotionFailure));
}?
decPendingAndFinishIfNeeded
计数。一个请求会由ReplicationGroup中的 多个分片执行，这些分片是否都已经执行完成了？就由pendingActions计数。不管是执行正常结束onResponse还是异常结束onFailure都会调用这个方法。
private void decPendingAndFinishIfNeeded() {
assert pendingActions.get() > 0 : "pending action count goes below 0 for request [" + request + "]";
if (pendingActions.decrementAndGet() == 0) {//当所有的shard都处理完这个请求,client收到ACK(里面允许一些replica执行失败), 或者是收到一个请求超时的响应
finish();
}
}对于发起index操作的Client而言，该 index 操作会由primary shard 执行，也会由若干个replica执行。因此，pendingActions统计到底有多少个分片(既包括主分片也包括副本分片)执行完成(在某些副本分片上执行失败也算执行完成)了。正是由于不管是 onResponse() 还是 onFailure()，都会执行decPendingAndFinishIfNeeded()方法，每执行一次，意味着有一个分片返回了响应，这时if (pendingActions.decrementAndGet() == 0)就减1，直到减为0时，调用finish()方法给Client返回ACK响应。
private void finish() {
if (finished.compareAndSet(false, true)) {
final ReplicationResponse.ShardInfo.Failure[] failuresArray;
if (shardReplicaFailures.isEmpty()) {
failuresArray = ReplicationResponse.EMPTY;
} else {
failuresArray = new ReplicationResponse.ShardInfo.Failure[shardReplicaFailures.size()];
shardReplicaFailures.toArray(failuresArray);
}
primaryResult.setShardInfo(new ReplicationResponse.ShardInfo(
totalShards.get(),
successfulShards.get(),
failuresArray
)
);
resultListener.onResponse(primaryResult);
}
}Client要么收到一个执行成功的ACK（默认情况下，只要primary shard执行成功，若存在 replica执行失败，Client也会收到一个执行成功的ACK，只不过 返回的ACK里面 _shards参数下的 failed 不为0而已），如下：
{
"_index": "user",
"_type": "profile",
"_id": "10",
"_version": 1,
"result": "created",
"_shards": {
? "total": 3,
? "successful": 1,
? "failed": 0
},
"_seq_no": 0,
"_primary_term": 1
}
另外，ES6.3.2 index操作源码流程 的总结部分，详细解释了Client收到执行成功的ACK的原因。
要么收到一个超时ACK，如下：（这篇文章提到了如何产生一个超时的ACK）
{
"statusCode": 504,
"error": "Gateway Time-out",
"message": "Client request timeout"
}
failShardIfNeeded方法一共有2个具体实现，看类图：
TransportReplicationAction.ReplicasProxy#failShardIfNeeded （默认实现）
@Override
public void failShardIfNeeded(ShardRouting replica, String message, Exception exception,Runnable onSuccess, Consumer<Exception> onPrimaryDemoted, Consumer<Exception> onIgnoredFailure) {
// This does not need to fail the shard. The idea is that this
// is a non-write operation (something like a refresh or a global
// checkpoint sync) and therefore the replica should still be
// "alive" if it were to fail.
onSuccess.run();
}TransportResyncReplicationAction.ResyncActionReplicasProxy#failShardIfNeeded(副本resync操作的实现)
/**
* A proxy for primary-replica resync operations which are performed on replicas when a new primary is promoted.
* Replica shards fail to execute resync operations will be failed but won't be marked as stale.
* This avoids marking shards as stale during cluster restart but enforces primary-replica resync mandatory.
*/
class ResyncActionReplicasProxy extends ReplicasProxy {
@Override
public void failShardIfNeeded(ShardRouting replica, String message, Exception exception, Runnable onSuccess,
Consumer<Exception> onPrimaryDemoted, Consumer<Exception> onIgnoredFailure) {
shardStateAction.remoteShardFailed(replica.shardId(), replica.allocationId().getId(), primaryTerm, false, message, exception,
createShardActionListener(onSuccess, onPrimaryDemoted, onIgnoredFailure));
}
}TransportWriteAction.WriteActionReplicasProxy#failShardIfNeeded(index 写操作的实现)
/**
* A proxy for <b>write</b> operations that need to be performed on the
* replicas, where a failure to execute the operation should fail
* the replica shard and/or mark the replica as stale.
*
* This extends {@code TransportReplicationAction.ReplicasProxy} to do the
* failing and stale-ing.
*/
class WriteActionReplicasProxy extends ReplicasProxy {
@Override
public void failShardIfNeeded(ShardRouting replica, String message, Exception exception,Runnable onSuccess, Consumer<Exception> onPrimaryDemoted, Consumer<Exception> onIgnoredFailure) {
if (TransportActions.isShardNotAvailableException(exception) == false) {
logger.warn(new ParameterizedMessage("[{}] {}", replica.shardId(), message), exception);}
shardStateAction.remoteShardFailed(replica.shardId(), replica.allocationId().getId(), primaryTerm, true, message, exception,
createShardActionListener(onSuccess, onPrimaryDemoted, onIgnoredFailure));
}原文：https://www.cnblogs.com/hapjin/p/10585555.html
标签：group state spro %s 多个 clu format 请求 file
原文地址：https://www.cnblogs.com/hapjin/p/10585555.html
