网络组相关实验

标签：文件   rip   bond   工作   manual   broadcast   top   run   conf   

网络组是centos7上新出的一个技术，它的作用和bonding类似，是将多个网卡聚合在一起方法，从而实现冗错和提高吞吐量，不同于旧版中bonding技术，网路组提供更好的性能和扩展性，它是由内核驱动和teamd守护进程实现。
网路组可以工作在多种方式(runner)
broadcast
roundrobin
activebackup
loadbalance
lacp (implements the 802.3ad Link Aggregation Control Protocol)

实验环境：
一台CentOS7主机，网卡2块。

创建网络组

1.创建网路网

[root@centos7 ~]# nmcli connection add con-name team0 ifname team0 type team ipv4.method manual ipv4.addresses 192.168.172.100 config ‘{"runner":{"name":"loadbalance"}}‘
Connection ‘team0‘ (24db0099-b9fa-4aae-ace0-9421e3c69278) successfully added.

2.添加物理网卡
分别将ens33和ens37添加至网路组内

[root@centos7 ~]# nmcli connection add con-name team0-ens33 ifname ens33 type team-slave master team0
Connection ‘team0-ens33‘ (0d00650a-e379-4c70-9f62-ba268af1a208) successfully added.
[root@centos7 ~]# nmcli connection add con-name team0-ens37 ifname ens37 type team-slave master team0
Connection ‘team0-ens37‘ (2916ab1f-2e3c-477b-aaaf-52dfaecaaeb7) successfully added.

3.将物理网卡和网络组关联起来

#由于刚才只是将物理网卡添加至网络组内，所以此时team0-ens33和team0-ens37并未启用
[root@centos7 ~]# nmcli connection
NAME                UUID                                  TYPE      DEVICE 
ens33               fca2f13f-7310-4595-bbb1-e6d0e3662aff  ethernet  ens33  
team0               24db0099-b9fa-4aae-ace0-9421e3c69278  team      team0  
virbr0              803d85ba-4e80-470f-bcf5-1b22b5653026  bridge    virbr0 
Wired connection 1  3f019cd5-7685-3368-960c-101e35cd6ce7  ethernet  ens37  
team0-ens33         0d00650a-e379-4c70-9f62-ba268af1a208  ethernet  --     
team0-ens37         2916ab1f-2e3c-477b-aaaf-52dfaecaaeb7  ethernet  --   
#将网络组内的物理网卡关联起来
[root@centos7 ~]# nmcli connection up team0-ens33
Connection successfully activated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/7)
[root@centos7 ~]# nmcli connection up team0-ens37
Connection successfully activated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/8)
#此时team-ens33和team-ens37都已经启用，网络组创建成功
[root@centos7 ~]# nmcli connection 
NAME                UUID                                  TYPE      DEVICE 
team0               24db0099-b9fa-4aae-ace0-9421e3c69278  team      team0  
team0-ens33         0d00650a-e379-4c70-9f62-ba268af1a208  ethernet  ens33  
team0-ens37         2916ab1f-2e3c-477b-aaaf-52dfaecaaeb7  ethernet  ens37  
virbr0              803d85ba-4e80-470f-bcf5-1b22b5653026  bridge    virbr0 
ens33               fca2f13f-7310-4595-bbb1-e6d0e3662aff  ethernet  --     
Wired connection 1  3f019cd5-7685-3368-960c-101e35cd6ce7  ethernet  --   

4.查看网络组状态

[root@centos7 ~]# teamdctl team0 state
setup:
  runner: loadbalance
ports:
  ens33
    link watches:
      link summary: up
      instance[link_watch_0]:
        name: ethtool
        link: up
        down count: 0
  ens37
    link watches:
      link summary: up
      instance[link_watch_0]:
        name: ethtool
        link: up
        down count: 0

网络组的删除

1.删除相关配置文件
由于nmcli命令在执行时会自动生成网卡的配置文件，所以删除网路组时需要将相应的配置文件进行删除

[root@centos7 ~]# rm -vf /etc/sysconfig/network-scripts/ifcfg-team0*
removed ‘/etc/sysconfig/network-scripts/ifcfg-team0’
removed ‘/etc/sysconfig/network-scripts/ifcfg-team0-ens33’
removed ‘/etc/sysconfig/network-scripts/ifcfg-team0-ens37’

2.取消相关网卡的关联

#将网络组中的ens33及ens37取消关联
[root@centos7 ~]# nmcli connection down team0-ens33
Connection ‘team0-ens33‘ successfully deactivated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/7)
[root@centos7 ~]# nmcli connection down team0-ens37
Connection ‘team0-ens37‘ successfully deactivated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/8)
#删除链接ens33和ens37
[root@centos7 ~]# nmcli connection delete team0-ens33
Connection ‘team0-ens33‘ (0d00650a-e379-4c70-9f62-ba268af1a208) successfully deleted.
[root@centos7 ~]# nmcli connection delete team0-ens37
Connection ‘team0-ens37‘ (2916ab1f-2e3c-477b-aaaf-52dfaecaaeb7) successfully deleted.

3.将网路组删除

#先禁用网路组
[root@centos7 ~]# nmcli connection down team0 
Connection ‘team0‘ successfully deactivated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/6)
#将网路组删除
[root@centos7 ~]# nmcli connection delete team0 
Connection ‘team0‘ (24db0099-b9fa-4aae-ace0-9421e3c69278) successfully deleted.

此时网路组已经从主机上删除

[root@centos7 ~]# nmcli connection 
NAME                UUID                                  TYPE      DEVICE 
ens33               fca2f13f-7310-4595-bbb1-e6d0e3662aff  ethernet  ens33  
virbr0              803d85ba-4e80-470f-bcf5-1b22b5653026  bridge    virbr0 
Wired connection 1  3f019cd5-7685-3368-960c-101e35cd6ce7  ethernet  ens37  

网络组相关实验

标签：文件   rip   bond   工作   manual   broadcast   top   run   conf   

原文地址：https://blog.51cto.com/11886307/2372961