L319 Zigbee test coding- field test fail-base on EFR32MG1

标签：matching   field   img   eve   strong   proc   test   check   output   

1 Test coding

Zigbee  test of Tx power and frequency for every channel.

Testing Procedure
1) Power up the testing board & connect to PC with uart (pb12 =tx  ,pb13 =rx, 115200,n,8,1)
2) Input the testing command to testing board (eg. as below)   // Notice the format error

3) Disconnect the testing board to the testing chamber

Input command to testing board:
rx 0
setDebugMode 1
freqOverride 2405000000 -- it can choose other frequency
setDebugMode 0
setPower 100
setTxTone 1 -- start TX

 2 RF-layout  check

Field test : 65M   NG

Reference quantity : above 85M 

Analyse：

1 Directly connect output power ：12dB

2 EIRP：Antenna output power： 7.6 dB  65M

DFM：

1 Re-layout 

2 RF-  Antenna impedance matching 

3 SW- channel setting

L319 Zigbee test coding- field test fail-base on EFR32MG1

标签：matching   field   img   eve   strong   proc   test   check   output   

原文地址：https://www.cnblogs.com/huangbaobaoi/p/10644752.html