码迷，mamicode.com
首页 > 其他好文 > 详细

stm32驱动12832液晶屏程序（ST7565R控制器）

时间：2019-04-29 21:10:56      阅读：197      评论：0      收藏：0      [点我收藏+]

标签：tla   ESS   地址   i++   enc   pow   map   pcl   art   

 

LCD12832.c文件：
#include"stm32f10x_lib.h"
#include "OCM12232.h"
void Lcd12232delay(unsigned int Time)//延时函数
{
  unsigned int i,j;
  for ( i=0;i<Time;i++)
  for (j=0;j<100;j++);
}
void Delay(unsigned int us)//延时微秒
{
  unsigned int i;
  for ( i=0;i<us;i++);
}
void LCD_WriteLByte(u8 Byte)//写PC口的低8位，高8位不变
{
  u16 Data_PAL;
  Data_PAL = GPIO_ReadOutputData(GPIOC);
  Data_PAL = Data_PAL&0xFF00;//保留高8位数据
  Data_PAL = Data_PAL | Byte;//写入低8位数据
  GPIO_Write(GPIOC,Data_PAL );
}
void w_com(unsigned char Byte)//向LCD写指令
{
  A0_0;
  CS_0;
  RD_1;
  WR_0;
  Delay(2);
  LCD_WriteLByte(Byte);
  Delay(2);
  WR_1;
}
void w_data(unsigned char data)//向LCD写数据
{
  A0_1;
  CS_0;
  RD_1;
  WR_0;
  Delay(2);
  LCD_WriteLByte(data);
  Delay(2);
  WR_1;
}
void SetStartPage(u8 StartPageAddress)//设置起始页面地址
{
  w_com(0xB0|StartPageAddress);
}
void SetStartColumn(u8 StartColumnAddress)//设置起始列地址
{
  w_com(0x10|StartColumnAddress);
}
void SetStartLine(u8 StartLineAddress)//设置起始行地址
{
  w_com(0x40|StartLineAddress);
}
void clrscr(void)//清屏
{
  u8 i,page;
  for(page=0xb0;page<0xb4;page++)
  {
    w_com(page);
    w_com(0x10);//列地址，高低字节两次写入，从第0列开始
    w_com(0x40);//行地址，从第0行开始
    for(i=0;i<128;i++)
    {w_data(0);}
  }
}
void ClrOnePage(unsigned StartPage)//清除一页
{
  u8 i;
  w_com(0xb0+StartPage);//页地址
  w_com(0x10);//列地址，从第0列开始
  w_com(0x40);//行地址，从第0行开始
  for(i=0;i<128;i++)
  {w_data(0);}
}
void ClrNumColumn(unsigned char StartPage,unsigned char StartColumn,unsigned Num)//清除StartPage页从StartColumn个汉字位置开始的Num列
{
  u8 i;
  w_com(0xb0+StartPage);
  w_com(0x10+StartColumn);
  w_com(0x40);//行地址，从第0行开始
  for(i=0;i<Num;i++)
  {w_data(0);}
}
void Displayhz(unsigned char num,const unsigned char *p)//从(0,0)开始显示num个16*16的汉字(包括标点符号)
{
  u8 i,j;
  if(num<=8)
  {
    w_com(0xb0);
    w_com(0x10);//列地址，从第0列开始
    w_com(0x40);//行地址，从第0行开始
    for(i=0;i<8;i++)
    {
      for(j=0;j<16;j++)
      {
        if(16*2*i+j<32*num)
        {w_data(p[16*2*i+j]);}
      }
    }
  
    w_com(0xb1);
    w_com(0x10);//列地址，从第0列开始
    w_com(0x40);//行地址，从第0行开始
    for(i=0;i<8;i++)
    {
      for(j=0;j<16;j++)
      {
        if(16*(2*i+1)+j<32*num)
        {w_data(p[16*(2*i+1)+j]);}
      }
    }
  }
  else if(num>8)
    {
      w_com(0xb0);
      w_com(0x10);//列地址，从第0列开始
      w_com(0x40);//行地址，从第0行开始
      for(i=0;i<8;i++)
       {
        for(j=0;j<16;j++)
         {
          if(16*2*i+j<32*num)
           {w_data(p[16*2*i+j]);}
         }
       }
  
        w_com(0xb1);
        w_com(0x10);//列地址，从第0列开始
        w_com(0x40);//行地址，从第0行开始
        for(i=0;i<8;i++)
         {
          for(j=0;j<16;j++)
           {
            if(16*(2*i+1)+j<32*num)
             {w_data(p[16*(2*i+1)+j]);}
           }
         }
    
        w_com(0xb2);
        w_com(0x10);//列地址，从第0列开始
        w_com(0x40);//行地址，从第0行开始
        for(i=8;i<16;i++)
         {
          for(j=0;j<16;j++)
           {
             if(16*2*i+j<32*num)
             {w_data(p[16*2*i+j]);}
           }
         }
    
        w_com(0xb3);
        w_com(0x10);//列地址，从第0列开始
        w_com(0x40);//行地址，从第0行开始
        for(i=8;i<16;i++)
         {
          for(j=0;j<16;j++)
           {
             if(16*(2*i+1)+j<32*num)
             {w_data(p[16*(2*i+1)+j]);}
           }
         }
    }
}
void DisplayHz(unsigned char StartPage,unsigned char column,unsigned char Num,const unsigned char *p)//从StartPage页的第Column个汉字位置开始显示Num个汉字
{
  u8 i,j;
  w_com(0xb0+StartPage);
  w_com(0x10+column);//列地址，从第0列开始
  w_com(0x40);//行地址，从第0行开始
  
  for(i=0;i<Num;i++)
    {
      for(j=0;j<16;j++)
      {w_data(p[16*2*i+j]);}
    }
  w_com(0xb1+StartPage);
  w_com(0x10+column);//列地址，从第column个汉字列开始
  w_com(0x40);//行地址，从第0行开始
  for(i=0;i<Num;i++)
  {
    for(j=0;j<16;j++)
    {w_data(p[16*(2*i+1)+j]);}
  }
}
void DisplayZf(unsigned char StartPage,unsigned char column,unsigned char Num,const unsigned char *p)//从StartPage页的第Column个字符位置开始显示Num个8*16的字符
{
  u8 i,j;
  
  w_com(0xb0+StartPage);
  w_com(0x10+column);//列地址，从第0列开始
  w_com(0x40);//行地址，从第0行开始
  
  for(i=0;i<Num;i++)
    {
      for(j=0;j<8;j++)
      {w_data(p[8*2*i+j]);}
    }
  
  w_com(0xb1+StartPage);
  w_com(0x10+column);//列地址，从第0列开始
  w_com(0x40);//行地址，从第0行开始
  for(i=0;i<Num;i++)
  {
    for(j=0;j<8;j++)
    {w_data(p[8*(2*i+1)+j]);}
  }
}
void DisplayZF(unsigned char num,const unsigned char *p)//从(0,0)开始显示num个8*16的汉字(包括标点符号)
{
  u8 i,j;
  if(num<=16)
  {
    w_com(0xb0);
      w_com(0x10);//列地址，从第0列开始
      w_com(0x40);//行地址，从第0行开始
      for(i=0;i<16;i++)
       {
        for(j=0;j<8;j++)
         {
          if(8*2*i+j<16*num)
           {w_data(p[8*2*i+j]);}
         }
       }
  
        w_com(0xb1);
        w_com(0x10);//列地址，从第0列开始
        w_com(0x40);//行地址，从第0行开始
        for(i=0;i<16;i++)
         {
          for(j=0;j<8;j++)
           {
            if(8*(2*i+1)+j<16*num)
             {w_data(p[8*(2*i+1)+j]);}
           }
         }
  }
  else if(num>16)
    {
      w_com(0xb0);
      w_com(0x10);//列地址，从第0列开始
      w_com(0x40);//行地址，从第0行开始
      for(i=0;i<16;i++)
       {
        for(j=0;j<8;j++)
         {
          if(8*2*i+j<16*num)
           {w_data(p[8*2*i+j]);}
         }
       }
  
        w_com(0xb1);
        w_com(0x10);//列地址，从第0列开始
        w_com(0x40);//行地址，从第0行开始
        for(i=0;i<16;i++)
         {
          for(j=0;j<8;j++)
           {
            if(8*(2*i+1)+j<16*num)
             {w_data(p[8*(2*i+1)+j]);}
           }
         }
    
        w_com(0xb2);
        w_com(0x10);//列地址，从第0列开始
        w_com(0x40);//行地址，从第0行开始
        for(i=16;i<32;i++)
         {
          for(j=0;j<8;j++)
           {
             if(8*2*i+j<16*num)
             {w_data(p[8*2*i+j]);}
           }
         }
    
        w_com(0xb3);
        w_com(0x10);//列地址，从第0列开始
        w_com(0x40);//行地址，从第0行开始
        for(i=16;i<32;i++)
         {
          for(j=0;j<8;j++)
           {
             if(8*(2*i+1)+j<16*num)
             {w_data(p[8*(2*i+1)+j]);}
           }
         }
    }
}
void display_map(const unsigned char *p)//显示128*32的图片，p是图片数据首地址
{
  unsigned char seg;
  unsigned char page;
  for(page=0xb0;page<0xb4;page++)//写页地址共4页0xb0--0xb3
  {
    w_com(page);
    w_com(0x10);//列地址，高低字节两次写入，从第0列开始
    w_com(0x40);//行地址，从第0行开始
    for(seg=0;seg<128;seg++)//写128列
    {w_data(*p++);}
  }
}
void LCD_Init()//LCD初始化
{
  RES_0;
  Lcd12232delay(10);
  RES_1;
  w_com(0xaf);//ON DSIPLAY
  w_com(0x40);//START Line DISPLAY
  
  w_com(0xa0);//ADC正常
  //w_com(0xa1);//ADC反向
  
  w_com(0xa6);//正常显示
  //w_com(0xa7);//反白显示
  
  w_com(0xa4);//CLEAR--Normal Modle
  //w_com(0xa5);//全屏显示
  
  w_com(0xa2);//1/9BIAS--1/9偏置设置
  //w_com(0xa3);//1/7BIAS--1/7偏置设置
  
  w_com(0xc8);//COMMON OUTPUT DIRECTION
  //w_com(0xc0);
  
  w_com(0x2f);//POWER CONTROL
  w_com(0x20);//RESISTER RATIO--粗调
  w_com(0x81);//VOLUM MODE SET
  w_com(0x20);//RESISTER RATIO--细调
}
LCD12832.h文件：
#ifndef _OCM12232_h_
#define _OCM12232_h_
#define CS_1             GPIO_SetBits(GPIOC, GPIO_Pin_8)    //取消LCD片选
#define CS_0             GPIO_ResetBits(GPIOC, GPIO_Pin_8)  //LCD片选有效
#define RES_1            GPIO_SetBits(GPIOC, GPIO_Pin_9)    //LCD低电平复位，复位之后保持高电平
#define RES_0            GPIO_ResetBits(GPIOC, GPIO_Pin_9)  //LCD复位
#define A0_1             GPIO_SetBits(GPIOC, GPIO_Pin_10)   //Ao=1,向LCD输入数据
#define A0_0             GPIO_ResetBits(GPIOC, GPIO_Pin_10) //Ao=0,向LCD写入指令
#define WR_1             GPIO_SetBits(GPIOC, GPIO_Pin_11)   //LCD写禁止
#define WR_0             GPIO_ResetBits(GPIOC, GPIO_Pin_11) //LCD写允许
#define RD_1             GPIO_SetBits(GPIOC, GPIO_Pin_12)   //LCD读禁止
#define RD_0             GPIO_ResetBits(GPIOC, GPIO_Pin_12) //LCD读允许

void Lcd12232delay(unsigned int Time);//延时函数
void LCD_WriteLByte(u8 Byte);//写PC口的低8位，高8位不变
void w_com(unsigned char Byte);//向LCD写指令
void w_data(unsigned char data);//向LCD写数据
void SetStartPage(u8 StartPageAddress);//设置起始页面地址
void SetStartColumn(u8 StartColumnAddress);//设置起始列地址
void SetStartLine(u8 StartLineAddress);//设置起始行地址
void clrscr(void);//清屏
void ClrOnePage(unsigned StartPage);//清除一页
void ClrNumColumn(unsigned char StartPage,unsigned char StartColumn,unsigned Num);//清除StartPage页从StartColumn个汉字位置开始的Num列
void Displayhz(unsigned char num,const unsigned char *p);//从(0,0)开始显示num个16*16的汉字(包括标点符号)
void DisplayHz(unsigned char StartPage,unsigned char column,unsigned char Num,const unsigned char *p);//从StartPage页的第Column个汉字位置开始显示Num个汉字
void DisplayZf(unsigned char StartPage,unsigned char column,unsigned char Num,const unsigned char *p);//从StartPage页的第Column个字符位置开始显示Num个8*16的字符
void DisplayZF(unsigned char num,const unsigned char *p);//从(0,0)开始显示num个8*16的汉字(包括标点符号)
void display_map(const unsigned char *p);//显示128*32的图片，p是图片数据首地址
void LCD_Init();//LCD初始化
#endif
hw_conf.C文件：
#include"stm32f10x_lib.h"
#include "hw_conf.h"
#include "OCM12232.h"
ErrorStatus HSEStartUpStatus;
void RCC_Configuration(void)
{
  RCC_DeInit();
  RCC_HSEConfig(RCC_HSE_ON);
  HSEStartUpStatus = RCC_WaitForHSEStartUp();
  if(HSEStartUpStatus == SUCCESS)
  {
    FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable);
    FLASH_SetLatency(FLASH_Latency_2);
    RCC_HCLKConfig(RCC_SYSCLK_Div1);
    RCC_PCLK2Config(RCC_HCLK_Div1);
    RCC_PCLK1Config(RCC_HCLK_Div2);
    RCC_PLLConfig(RCC_PLLSource_HSE_Div1, RCC_PLLMul_9);
    RCC_PLLCmd(ENABLE);
    while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET)
    {
    }
    RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);
    while(RCC_GetSYSCLKSource() != 0x08)
    {
    }
  }
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC, ENABLE);
}
void GPIO_Configuration(void)
{
  GPIO_InitTypeDef GPIO_InitStructure;
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_2 | GPIO_Pin_3 | GPIO_Pin_4 | GPIO_Pin_5 | GPIO_Pin_6 | GPIO_Pin_7;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_10MHz;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
  GPIO_Init(GPIOC, &GPIO_InitStructure);
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10 | GPIO_Pin_11 | GPIO_Pin_12;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_10MHz;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
  GPIO_Init(GPIOC, &GPIO_InitStructure);
}
void NVIC_Configuration(void)
{
#ifdef  VECT_TAB_RAM
  NVIC_SetVectorTable(NVIC_VectTab_RAM, 0x0);
#else
  NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x0); 
#endif
}
void Setup_System(void)
{
RCC_Configuration();
GPIO_Configuration();
NVIC_Configuration();
}
hw_conf.h文件：
#ifndef   _hw_conf_H_
#define   _hw_conf_H_
extern void Setup_System(void);
#endif
main.c文件：
#include"stm32f10x_lib.h"
#include "hw_conf.h"
#include"OCM12232.h"
const unsigned char tab4[]={
/*--  文字:  武  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x10,0x10,0x14,0x14,0x14,0xD4,0x14,0x14,0x10,0x7F,0x90,0x12,0x14,0x10,0x10,0x00,
0x40,0x40,0x7F,0x20,0x20,0x1F,0x11,0x11,0x01,0x00,0x07,0x18,0x20,0x40,0xF0,0x00,
/*--  文字:  汉  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x10,0x60,0x01,0x86,0x60,0x04,0x1C,0xE4,0x04,0x04,0x04,0xE4,0x1C,0x04,0x00,0x00,
0x04,0x04,0x7E,0x01,0x40,0x20,0x20,0x10,0x0B,0x04,0x0B,0x10,0x30,0x60,0x20,0x00,
/*--  文字:  普  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x40,0x44,0x54,0x64,0x45,0x7E,0x44,0x44,0x44,0x7E,0x45,0x64,0x54,0x44,0x40,0x00,
0x00,0x00,0x00,0xFF,0x49,0x49,0x49,0x49,0x49,0x49,0x49,0xFF,0x00,0x00,0x00,0x00,
/*--  文字:  仕  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x80,0x40,0xF0,0x1C,0x27,0x22,0x20,0x20,0x20,0xFF,0x20,0x20,0x20,0x30,0x20,0x00,
0x00,0x00,0x7F,0x00,0x20,0x20,0x20,0x20,0x20,0x3F,0x20,0x20,0x20,0x30,0x20,0x00,
/*--  文字:  数  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x10,0x92,0x54,0x38,0xFF,0x38,0x54,0x52,0x80,0xF0,0x1F,0x12,0x10,0xF0,0x10,0x00,
0x42,0x42,0x2A,0x2E,0x13,0x1A,0x26,0x02,0x40,0x20,0x13,0x0C,0x33,0x60,0x20,0x00,
/*--  文字:  控  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x08,0x08,0x08,0xFF,0x88,0x48,0x00,0x98,0x48,0x28,0x0A,0x2C,0x48,0xD8,0x08,0x00,
0x02,0x42,0x81,0x7F,0x00,0x00,0x40,0x42,0x42,0x42,0x7E,0x42,0x42,0x42,0x40,0x00,
/*--  文字:  科  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x10,0x12,0x92,0x72,0xFE,0x51,0x91,0x00,0x22,0xCC,0x00,0x00,0xFF,0x00,0x00,0x00,
0x04,0x02,0x01,0x00,0xFF,0x00,0x04,0x04,0x04,0x02,0x02,0x02,0xFF,0x01,0x01,0x00,
/*--  文字:  技  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x08,0x08,0x88,0xFF,0x48,0x28,0x00,0xC8,0x48,0x48,0x7F,0x48,0xC8,0x48,0x08,0x00,
0x01,0x41,0x80,0x7F,0x00,0x40,0x40,0x20,0x13,0x0C,0x0C,0x12,0x21,0x60,0x20,0x00,
/*--  文字:  有  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x04,0x84,0x44,0xE4,0x34,0x2C,0x27,0x24,0x24,0x24,0xE4,0x04,0x04,0x04,0x00,
0x02,0x01,0x00,0x00,0xFF,0x09,0x09,0x09,0x29,0x49,0xC9,0x7F,0x00,0x00,0x00,0x00,
/*--  文字:  限  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0xFE,0x02,0x32,0x4E,0x82,0x00,0xFE,0x4A,0xCA,0x4A,0x4A,0x4A,0x7E,0x00,0x00,0x00,
0xFF,0x00,0x02,0x04,0x03,0x00,0xFF,0x40,0x20,0x03,0x0C,0x12,0x21,0x60,0x20,0x00,
/*--  文字:  公  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x00,0x80,0x40,0x30,0x0E,0x84,0x00,0x00,0x0E,0x10,0x60,0xC0,0x80,0x80,0x00,
0x00,0x01,0x20,0x70,0x28,0x24,0x23,0x31,0x10,0x10,0x14,0x78,0x30,0x01,0x00,0x00,
/*--  文字:  司  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x10,0x92,0x92,0x92,0x92,0x92,0x92,0x92,0x92,0x12,0x02,0x02,0xFE,0x00,0x00,
0x00,0x00,0x1F,0x04,0x04,0x04,0x04,0x04,0x04,0x0F,0x00,0x20,0x40,0x3F,0x00,0x00,
/*--  文字:  欢  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x14,0x24,0x44,0x84,0x64,0x1C,0x20,0x18,0x0F,0xE8,0x08,0x08,0x28,0x18,0x08,0x00,
0x20,0x10,0x4C,0x43,0x43,0x2C,0x20,0x10,0x0C,0x03,0x06,0x18,0x30,0x60,0x20,0x00,
/*--  文字:  迎  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x40,0x41,0xCE,0x04,0x00,0xFC,0x04,0x02,0x02,0xFC,0x04,0x04,0x04,0xFC,0x00,0x00,
0x40,0x20,0x1F,0x20,0x40,0x47,0x42,0x41,0x40,0x5F,0x40,0x42,0x44,0x43,0x40,0x00,
/*--  文字:  你  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x80,0x40,0xF0,0x2C,0x43,0x20,0x98,0x0F,0x0A,0xE8,0x08,0x88,0x28,0x1C,0x08,0x00,
0x00,0x00,0x7F,0x00,0x10,0x0C,0x03,0x21,0x40,0x3F,0x00,0x00,0x03,0x1C,0x08,0x00,
/*--  文字:  ！  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x5F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
};
const unsigned char tab3[]={
/*--  文字:  北  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x20,0x20,0x20,0x20,0xFF,0x00,0x00,0x00,0xFF,0x40,0x20,0x30,0x18,0x10,0x00,
0x10,0x30,0x18,0x08,0x04,0x7F,0x00,0x00,0x00,0x3F,0x40,0x40,0x40,0x40,0x78,0x00,
/*--  文字:  京  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x04,0x04,0xE4,0x24,0x24,0x25,0x26,0x24,0x24,0x24,0xE4,0x06,0x04,0x00,0x00,
0x00,0x20,0x10,0x19,0x0D,0x41,0x81,0x7F,0x01,0x01,0x05,0x0D,0x38,0x10,0x00,0x00,
/*--  文字:  欢  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x14,0x24,0x44,0x84,0x64,0x1C,0x20,0x18,0x0F,0xE8,0x08,0x08,0x28,0x18,0x08,0x00,
0x20,0x10,0x4C,0x43,0x43,0x2C,0x20,0x10,0x0C,0x03,0x06,0x18,0x30,0x60,0x20,0x00,
/*--  文字:  迎  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x40,0x41,0xCE,0x04,0x00,0xFC,0x04,0x02,0x02,0xFC,0x04,0x04,0x04,0xFC,0x00,0x00,
0x40,0x20,0x1F,0x20,0x40,0x47,0x42,0x41,0x40,0x5F,0x40,0x42,0x44,0x43,0x40,0x00,
/*--  文字:  你  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x80,0x40,0xF0,0x2C,0x43,0x20,0x98,0x0F,0x0A,0xE8,0x08,0x88,0x28,0x1C,0x08,0x00,
0x00,0x00,0x7F,0x00,0x10,0x0C,0x03,0x21,0x40,0x3F,0x00,0x00,0x03,0x1C,0x08,0x00,
/*--  文字:  ！  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x5F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
};
const unsigned char tab2[]={
/*--  文字:  A  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,
/*--  文字:  B  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,
/*--  文字:  C  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,
/*--  文字:  D  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,
/*--  文字:  E  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,
/*--  文字:  F  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,
/*--  文字:  G  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,
/*--  文字:  H  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,
/*--  文字:  I  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,
/*--  文字:  J  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,
/*--  文字:  K  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,
/*--  文字:  L  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,
/*--  文字:  M  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,
/*--  文字:  N  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,
/*--  文字:  8  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,
/*--  文字:  8  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,
/*--  文字:  6  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,
/*--  文字:  2  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,
/*--  文字:  9  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,
/*--  文字:  8  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,
/*--  文字:  8  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,
/*--  文字:  J  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,
/*--  文字:  M  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,
/*--  文字:  A  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,
/*--  文字:  S  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,
/*--  文字:  D  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,
/*--  文字:  F  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,
/*--  文字:  G  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,
/*--  文字:  H  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,
};
const unsigned char tab5[]={
/*--  调入了一幅图像：D:\My Documents\My Pictures\我爱你.bmp  --*/
/*--  宽度x高度=128x32  --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x80,0x80,0xC0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xC0,0xC0,0xC0,0x80,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0xCE,0x00,0x00,0x84,0x00,0x00,0x00,0x04,0x80,0x48,
0x00,0x02,0x02,0x0C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xE8,0xFF,0xB6,0x6F,0xFF,0xFB,0xFF,0xD0,0xE0,
0x40,0xE0,0xC0,0xE0,0xC0,0xE0,0xE0,0x60,0xA0,0xEE,0xFF,0xFB,0xDE,0x7F,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0xC0,0xC0,0xC0,0xC0,0xC4,0x9F,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x9C,0x9C,0x9E,0xFF,0xF3,0xF3,0xF3,0xFF,0xFF,0xFF,
0x7C,0x54,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x80,0x22,0x50,0x10,0x0C,0x00,0x04,0x04,0x00,
0x0C,0x02,0x08,0x21,0x90,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0B,0x3F,0xDD,0xCF,0x8F,0x8E,0xCF,0xFE,0x37,
0x07,0x07,0x06,0x07,0x07,0x05,0x07,0x07,0x1F,0x3D,0xFE,0xEF,0xFF,0xF5,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x08,0x7E,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0xFF,0xFF,0xFF,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x02,0x01,0x06,0x00,0x0C,0x10,0x08,0x00,0x08,
0x00,0x08,0x00,0x06,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,
0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x02,0x00,0x00,0x00,0x20,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
};
void main(void)
{ 
  Setup_System();
  LCD_Init();
  clrscr();//清屏
  while(1)
  {
    //display_map(tab3);//显示图片，p是图片数据首地址
    //Display_hz(16,tab4);
    //Disp_ZF(2,2,10,tab2);//从page页的第Column个字符位置开始显示Num个字符
    display_map(tab5);//显示图片，p是图片数据首地址
    //Display_ZF(22,tab2);
    //Disp_Hz(0,1,6,tab4);
    //Lcd12232delay(20000);
    //Disp_Hz(2,1,6,tab3);
    //ClrOnePage(1);
    //ClrNumColumn(1,2,64);//清除page页从16*StartColumn开始的Num列
    //Lcd12232delay(200);
  }
}
字模提取软件：zimo221，纵向取模，字节倒序。

 

stm32驱动12832液晶屏程序（ST7565R控制器）

标签：tla   ESS   地址   i++   enc   pow   map   pcl   art   

原文地址：https://www.cnblogs.com/tianqiang/p/10792533.html
踩
(0)
赞
(0)
   
举报
评论 一句话评论（0）
登录后才能评论！
分享档案
更多>
2021年07月29日 (22)
2021年07月28日 (40)
2021年07月27日 (32)
2021年07月26日 (79)
2021年07月23日 (29)
2021年07月22日 (30)
2021年07月21日 (42)
2021年07月20日 (16)
2021年07月19日 (90)
2021年07月16日 (35)
周排行
mamicode.com排行更多图片
更多
友情链接
兰亭集智   国之画   百度统计   站长统计   阿里云   chrome插件   新版天听网
关于我们 - 联系我们 - 留言反馈
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码！