码迷,mamicode.com
首页 > 其他好文 > 详细

jmeter压测配置

时间:2019-05-16 22:59:02      阅读:202      评论:0      收藏:0      [点我收藏+]

标签:一段   activity   service   request   delay   解决   pcl   key   rop   

windows上面修改最大使用端口数和time_await等待时间

注册表需要添加两个配置,位置:
HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Services \ Tcpip \ Parameters

 

MaxUserPort :65534

TcpTimedWaitDelay:30

 

然而这么配置了之后,压测一段时间任然会有connect use错误提示出现,怀疑是jmeter没有重用keep alive,官方配置发现有三个配置参数比较可疑:

# Idle connection timeout (Milliseconds) to apply if the server does not send
# Keep-Alive headers (default 0)
# Set this > 0 to compensate for servers that don‘t send a Keep-Alive header
# If <= 0, idle timeout will only apply if the server sends a Keep-Alive header
httpclient4.idletimeout=10000

# Check connections if the elapsed time (Milliseconds) since the last
# use of the connection exceed this value
httpclient4.validate_after_inactivity=0

# TTL (in Milliseconds) represents an absolute value.
# No matter what, the connection will not be re-used beyond its TTL.
httpclient4.time_to_live=0
 
这么调整了配置之后还是不靠谱,jmeter.properties,user.properties这两个文件都修改过,任然有错误出现。
 
 
最好在官方发现这么一段话:
Use KeepAlive
 
JMeter sets the Connection: keep-alive header. This does not work properly with the default HTTP implementation, as connection re-use is not under user-control. It does work with the Apache HttpComponents HttpClient implementations.
 
怀疑是jmeter使用的client的问题,把Http Request->Advanced里面的Client Implement选择为Java之后,问题解决,1000并发跑了好久都没有出错?
 
 

jmeter压测配置

标签:一段   activity   service   request   delay   解决   pcl   key   rop   

原文地址:https://www.cnblogs.com/12taotie21/p/10878558.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!