码迷,mamicode.com
首页 > 其他好文 > 详细

06-4.部署高可用 kube-scheduler 集群

时间:2019-06-05 00:26:51      阅读:130      评论:0      收藏:0      [点我收藏+]

标签:self   system   ddr   res   reg   entity   text   dir   list   

06-4.部署高可用 kube-scheduler 集群

本文档介绍部署高可用 kube-scheduler 集群的步骤。

该集群包含 3 个节点,启动后将通过竞争选举机制产生一个 leader 节点,其它节点为阻塞状态。当 leader 节点不可用后,剩余节点将再次进行选举产生新的 leader 节点,从而保证服务的可用性。

为保证通信安全,本文档先生成 x509 证书和私钥,kube-scheduler 在如下两种情况下使用该证书:

  1. 与 kube-apiserver 的安全端口通信;
  2. 安全端口(https,10251) 输出 prometheus 格式的 metrics;

准备工作

下载最新版本的二进制文件、安装和配置 flanneld 参考:06-0.部署master节点.md

创建 kube-scheduler 证书和私钥

创建证书签名请求:

cat > kube-scheduler-csr.json <<EOF
{
    "CN": "system:kube-scheduler",
    "hosts": [
      "127.0.0.1",
      "192.168.1.106",
      "192.168.1.107",
      "192.168.1.108"
    ],
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
      {
        "C": "CN",
        "ST": "BeiJing",
        "L": "BeiJing",
        "O": "system:kube-scheduler",
        "OU": "4Paradigm"
      }
    ]
}
EOF
  • hosts 列表包含所有 kube-scheduler 节点 IP;
  • CN 为 system:kube-scheduler、O 为 system:kube-scheduler,kubernetes 内置的 ClusterRoleBindings system:kube-scheduler 将赋予 kube-scheduler 工作所需的权限。

生成证书和私钥:

cfssl gencert -ca=/etc/kubernetes/cert/ca.pem   -ca-key=/etc/kubernetes/cert/ca-key.pem   -config=/etc/kubernetes/cert/ca-config.json   -profile=kubernetes kube-scheduler-csr.json | cfssljson -bare kube-scheduler

创建和分发 kubeconfig 文件

kubeconfig 文件包含访问 apiserver 的所有信息,如 apiserver 地址、CA 证书和自身使用的证书;

source /opt/k8s/bin/environment.sh
kubectl config set-cluster kubernetes   --certificate-authority=/etc/kubernetes/cert/ca.pem   --embed-certs=true   --server=${KUBE_APISERVER}   --kubeconfig=kube-scheduler.kubeconfig

kubectl config set-credentials system:kube-scheduler   --client-certificate=kube-scheduler.pem   --client-key=kube-scheduler-key.pem   --embed-certs=true   --kubeconfig=kube-scheduler.kubeconfig

kubectl config set-context system:kube-scheduler   --cluster=kubernetes   --user=system:kube-scheduler   --kubeconfig=kube-scheduler.kubeconfig

kubectl config use-context system:kube-scheduler --kubeconfig=kube-scheduler.kubeconfig
  • 上一步创建的证书、私钥以及 kube-apiserver 地址被写入到 kubeconfig 文件中;

分发 kubeconfig 到所有 master 节点:

source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    scp kube-scheduler.kubeconfig k8s@${node_ip}:/etc/kubernetes/
  done

创建和分发 kube-scheduler systemd unit 文件

cat > kube-scheduler.service <<EOF
[Unit]
Description=Kubernetes Scheduler
Documentation=https://github.com/GoogleCloudPlatform/kubernetes

[Service]
ExecStart=/opt/k8s/bin/kube-scheduler \  --address=127.0.0.1 \  --kubeconfig=/etc/kubernetes/kube-scheduler.kubeconfig \  --leader-elect=true \  --alsologtostderr=true \  --logtostderr=false \  --log-dir=/var/log/kubernetes \  --v=2
Restart=on-failure
RestartSec=5
User=k8s

[Install]
WantedBy=multi-user.target
EOF
  • --address:在 127.0.0.1:10251 端口接收 http /metrics 请求;kube-scheduler 目前还不支持接收 https 请求;
  • --kubeconfig:指定 kubeconfig 文件路径,kube-scheduler 使用它连接和验证 kube-apiserver;
  • --leader-elect=true:集群运行模式,启用选举功能;被选为 leader 的节点负责处理工作,其它节点为阻塞状态;
  • User=k8s:使用 k8s 账户运行;

完整 unit 见 kube-scheduler.service

分发 systemd unit 文件到所有 master 节点:

source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    scp kube-scheduler.service root@${node_ip}:/etc/systemd/system/
  done

启动 kube-scheduler 服务

source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    ssh root@${node_ip} "mkdir -p /var/log/kubernetes && chown -R k8s /var/log/kubernetes"
    ssh root@${node_ip} "systemctl daemon-reload && systemctl enable kube-scheduler && systemctl restart kube-scheduler"
  done
  • 必须先创建日志目录;

检查服务运行状态

source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    ssh k8s@${node_ip} "systemctl status kube-scheduler|grep Active"
  done

确保状态为 active (running),否则查看日志,确认原因:

journalctl -u kube-scheduler

查看输出的 metric

注意:以下命令在 kube-scheduler 节点上执行。

kube-scheduler 监听 10251 端口,接收 http 请求:

$ sudo netstat -lnpt|grep kube-sche
tcp        0      0 127.0.0.1:10251         0.0.0.0:*               LISTEN      23783/kube-schedule
$ curl -s https://127.0.0.1:10251/metrics |head
# HELP apiserver_audit_event_total Counter of audit events generated and sent to the audit backend.
# TYPE apiserver_audit_event_total counter
apiserver_audit_event_total 0
# HELP go_gc_duration_seconds A summary of the GC invocation durations.
# TYPE go_gc_duration_seconds summary
go_gc_duration_seconds{quantile="0"} 9.7715e-05
go_gc_duration_seconds{quantile="0.25"} 0.000107676
go_gc_duration_seconds{quantile="0.5"} 0.00017868
go_gc_duration_seconds{quantile="0.75"} 0.000262444
go_gc_duration_seconds{quantile="1"} 0.001205223

测试 kube-scheduler 集群的高可用

随便找一个或两个 master 节点,停掉 kube-scheduler 服务,看其它节点是否获取了 leader 权限(systemd 日志)。

查看当前的 leader

$ kubectl get endpoints kube-scheduler --namespace=kube-system  -o yaml
apiVersion: v1
kind: Endpoints
metadata:
  annotations:
    control-plane.alpha.kubernetes.io/leader: ‘{"holderIdentity":"kube-node3_61f34593-6cc8-11e8-8af7-5254002f288e","leaseDurationSeconds":15,"acquireTime":"2018-06-10T16:09:56Z","renewTime":"2018-06-10T16:20:54Z","leaderTransitions":1}‘
  creationTimestamp: 2018-06-10T16:07:33Z
  name: kube-scheduler
  namespace: kube-system
  resourceVersion: "4645"
  selfLink: /api/v1/namespaces/kube-system/endpoints/kube-scheduler
  uid: 62382d98-6cc8-11e8-96fa-525400ba84c6



链接:https://www.orchome.com/1197
著作权归作者所有。商业转载请联系作者获得授权,非商业转载请注明出处。
 

06-4.部署高可用 kube-scheduler 集群

标签:self   system   ddr   res   reg   entity   text   dir   list   

原文地址:https://www.cnblogs.com/linux20190409/p/10976829.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!