标签:else host 修改 连接状态 技术 cut 信息 null get
(1).简介
MHA(Master High Availability)目前在MySQL高可用方面是一个相对成熟的解决方案,它由日本DeNA公司youshimaton(现就职于Facebook公司)开发,是一套优秀的作为MySQL高可用性环境下故障切换和主从提升的高可用软件。在MySQL故障切换过程中,MHA能做到在0~30秒之内自动完成数据库的故障切换操作,并且在进行故障切换的过程中,MHA能在最大程度上保证数据的一致性,以达到真正意义上的高可用。
该软件由两部分组成:MHA Manager(管理节点)和MHA Node(数据节点)。MHA Manager可以单独部署在一台独立的机器上管理多个master-slave集群,也可以部署在一台slave节点上。MHA Node运行在每台MySQL服务器上,MHA Manager会定时探测集群中的master节点,当master出现故障时,它可以自动将最新数据的slave提升为新的master,然后将所有其他的slave重新指向新的master。整个故障转移过程对应用程序完全透明。
在MHA自动故障切换过程中,MHA试图从宕机的主服务器上保存二进制日志,最大程度的保证数据的不丢失,但这并不总是可行的。例如,如果主服务器硬件故障或无法通过ssh访问,MHA没法保存二进制日志,只进行故障转移而丢失了最新的数据。使用MySQL 5.5的半同步复制,可以大大降低数据丢失的风险。MHA可以与半同步复制结合起来。如果只有一个slave已经收到了最新的二进制日志,MHA可以将最新的二进制日志应用于其他所有的slave服务器上,因此可以保证所有节点的数据一致性。
目前MHA主要支持一主多从的架构,要搭建MHA,要求一个复制集群中必须最少有三台数据库服务器,一主二从,即一台充当master,一台充当备用master,另外一台充当从库,因为至少需要三台服务器,出于机器成本的考虑,淘宝也在该基础上进行了改造,目前淘宝TMHA已经支持一主一从。MHA 适合任何存储引擎, 只要能主从复制的存储引擎它都支持,不限于支持事物的 innodb 引擎。另外对于想快速搭建的可以参考:MHA快速搭建(大佬的快速搭建指南)
我们自己使用其实也可以使用一主一从,但是master主机宕机后无法切换,以及无法补全二进制日志。master的mysqld进程crash(停止工作)后,还是可以切换成功,以及补全二进制日志。
官方介绍:https://code.google.com/p/mysql-master-ha/(需要梯子)
图01展示了如何通过MHA Manager管理多组主从复制。可以将MHA工作原理总结为如下:
( 图01 )
(1)从宕机崩溃的master保存二进制日志事件(binlog events);
(2)识别含有最新更新的slave;
(3)应用差异的中继日志(relay log)到其他的slave;
(4)应用从master保存的二进制日志事件(binlog events);
(5)提升一个slave为新的master;
(6)使其他的slave连接新的master进行复制;
MHA软件由两部分组成,Manager工具包和Node工具包,具体的说明如下。
Manager工具包主要包括以下几个工具:
masterha_check_ssh 检查MHA的SSH配置状况 masterha_check_repl 检查MySQL复制状况 masterha_manger 启动MHA masterha_check_status 检测当前MHA运行状态 masterha_master_monitor 检测master是否宕机 masterha_master_switch 控制故障转移(自动或者手动) masterha_conf_host 添加或删除配置的server信息
Node工具包(这些工具通常由MHA Manager的脚本触发,无需人为操作)主要包括以下几个工具:
save_binary_logs 保存和复制master的二进制日志 apply_diff_relay_logs 识别差异的中继日志事件并将其差异的事件应用于其他的slave filter_mysqlbinlog 去除不必要的ROLLBACK事件(MHA已不再使用这个工具) purge_relay_logs 清除中继日志(不会阻塞SQL线程)
注意:为了尽可能的减少主库硬件损坏宕机造成的数据丢失,因此在配置MHA的同时建议配置成MySQL 5.5的半同步复制。关于半同步复制原理各位自己进行查阅。(不是必须)
(2).实验环境
youxi1 192.168.1.6 CentOS7.5 管理节点 mha4mysql-manager,mha4mysql-node
youxi2 192.168.1.7 CentOS7.5 master Mysql5.7.26,mha4mysql-node
youxi3 192.168.1.8 CentOS7.5 slave1,备用master Mysql5.7.26,mha4mysql-node
youxi4 192.168.1.9 CentOS7.5 slave2 Mysql5.7.26,mha4mysql-node
(3).所有的服务器都安装mha4mysql-node
mha4mysql-node是所有服务器都需要安装的,首先安装该软件需要的依赖包
[root@youxi4 ~]# yum -y install perl-DBD-MySQL perl-Config-Tiny perl-Log-Dispatch perl-Parallel-ForkManager
如果报缺少libmysqlclient.so.18,安装mysql-community-libs-compat即可。
接着上传事先下载好的mha4mysql-node的rpm包,使用rpm安装
[root@youxi4 ~]# rpm -ivh mha4mysql-node-0.57-0.el7.noarch.rpm 准备中... ################################# [100%] 正在升级/安装... 1:mha4mysql-node-0.57-0.el7 ################################# [100%]
查看Node工具包:
[root@youxi4 ~]# ll /usr/bin/{app*,filter*,purge*,save*} -rwxr-xr-x 1 root root 16381 5月 31 2015 /usr/bin/apply_diff_relay_logs -rwxr-xr-x 1 root root 4807 5月 31 2015 /usr/bin/filter_mysqlbinlog -rwxr-xr-x 1 root root 8261 5月 31 2015 /usr/bin/purge_relay_logs -rwxr-xr-x 1 root root 7525 5月 31 2015 /usr/bin/save_binary_logs
(4).在管理节点youxi1上安装mha4mysql-manager
因为依赖包在安装mha4mysql-node时已经安装了,所以可以直接安装manager。
上传事先下载好的mha4mysql-manager的rpm包,使用rpm安装。
[root@youxi1 ~]# rpm -ivh mha4mysql-manager-0.57-0.el7.noarch.rpm 准备中... ################################# [100%] 正在升级/安装... 1:mha4mysql-manager-0.57-0.el7 ################################# [100%]
(5).ssh互信
管理节点youxi1要能免密登录主从复制的所有服务器,而不需要反向免密登录。主从复制的所有服务器之间要能免密登录。
所有节点生成密钥
[root@youxi1 ~]# ssh-keygen Generating public/private rsa key pair. Enter file in which to save the key (/root/.ssh/id_rsa): Created directory ‘/root/.ssh‘. Enter passphrase (empty for no passphrase): Enter same passphrase again: Your identification has been saved in /root/.ssh/id_rsa. Your public key has been saved in /root/.ssh/id_rsa.pub. The key fingerprint is: SHA256:+lvjcHIMg1+3TSMXo44vQZSVzPJaiOS2nOQo74lmNQI root@youxi1 The key‘s randomart image is: +---[RSA 2048]----+ | =.. | | . + + | | o o + o | | E .= o o. o | | . .*S+.o+ + | | o +o==o+ * . | | =..+ B.o . | | o..o B.o | | o..o o.... | +----[SHA256]-----+
接着互相发送密钥
//管理节点youxi1发送给youxi2、youxi3、youxi4 [root@youxi1 ~]# ssh-copy-id 192.168.1.7 /usr/bin/ssh-copy-id: INFO: Source of key(s) to be installed: "/root/.ssh/id_rsa.pub" The authenticity of host ‘192.168.1.7 (192.168.1.7)‘ can‘t be established. ECDSA key fingerprint is SHA256:j3ee8eoTo2XEv0QxCYmxphMipcNRxC+IONPmt1HwRLg. ECDSA key fingerprint is MD5:25:e2:b4:08:f2:79:7d:6e:42:84:b5:78:3d:6a:81:20. Are you sure you want to continue connecting (yes/no)? yes /usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed /usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys root@192.168.1.7‘s password: Number of key(s) added: 1 Now try logging into the machine, with: "ssh ‘192.168.1.7‘" and check to make sure that only the key(s) you wanted were added. [root@youxi1 ~]# ssh-copy-id 192.168.1.8 [root@youxi1 ~]# ssh-copy-id 192.168.1.9 //master服务器youxi2发送给youxi3、youxi4 [root@youxi2 ~]# ssh-copy-id 192.168.1.8 [root@youxi2 ~]# ssh-copy-id 192.168.1.9 //slave1服务器发youxi3送给youxi2、youxi4 [root@youxi3 ~]# ssh-copy-id 192.168.1.7 [root@youxi3 ~]# ssh-copy-id 192.168.1.9 //slave2服务器youxi4发送给youxi2、youxi3 [root@youxi4 bin]# ssh-copy-id 192.168.1.7 [root@youxi4 bin]# ssh-copy-id 192.168.1.8
测试是否可以免密登录,测试完这一步就结束了
(6).搭建主从环境
1)配置master
创建需要同步的数据库,并创建复制用的用户以及监控用的用户
[root@youxi2 ~]# mysql -uroot -p123456 mysql> create database test_db; Query OK, 1 row affected (0.00 sec) mysql> grant replication slave on *.* to ‘slave‘@‘192.168.1.%‘ identified by ‘123456‘; //复制用的用户 Query OK, 0 rows affected, 1 warning (0.05 sec) mysql> grant all privileges on *.* to ‘root‘@‘192.168.1.%‘ identified by ‘123456‘; //监控用的用户 Query OK, 0 rows affected, 1 warning (0.01 sec) mysql> flush privileges; //刷新权限表 Query OK, 0 rows affected (0.00 sec)
修改配置文件,重启mysqld
[root@youxi2 ~]# vim /etc/my.cnf server-id=1 log-bin=mysql-bin-master binlog-do-db=test_db [root@youxi2 ~]# systemctl restart mysqld
查看master状态
[root@youxi2 ~]# mysql -uroot -p123456 mysql> show master status\G *************************** 1. row *************************** File: mysql-bin-master.000001 Position: 154 Binlog_Do_DB: test_db Binlog_Ignore_DB: Executed_Gtid_Set: 1 row in set (0.00 sec)
注意:如果防火墙是打开的,记得添加mysql的端口号。
[root@youxi2 ~]# firewall-cmd --permanent --zone=public --add-port=3306/tcp success [root@youxi2 ~]# firewall-cmd --reload success [root@youxi2 ~]# firewall-cmd --zone=public --list-ports 3306/tcp
2)配置slave1,备用master
这是一台slave,也是一台master,所以既需要配置slave的信息,也要配置master的信息。
创建同步数据库,并创建复制用的用户以及监控用的用户
[root@youxi3 ~]# mysql -uroot -p123456 mysql> create database test_db; Query OK, 1 row affected (0.00 sec) mysql> grant replication slave on *.* to ‘slave‘@‘192.168.1.%‘ identified by ‘123456‘; //复制用的用户 Query OK, 0 rows affected, 1 warning (0.05 sec) mysql> grant all privileges on *.* to ‘root‘@‘192.168.1.%‘ identified by ‘123456‘; //监控用的用户 Query OK, 0 rows affected, 1 warning (0.01 sec) mysql> flush privileges; //刷新权限表 Query OK, 0 rows affected (0.01 sec)
修改配置文件,重启master
[root@youxi3 ~]# vim /etc/my.cnf server-id=2 log-bin=mysql-bin-slave1 //一定要存在二进制日志,因为随时有可能升为master binlog-do-db=test_db log-slave-updates=1 //一定要同步到二进制日志文件 [root@youxi3 ~]# systemctl restart mysqld
修改master信息,并查看slave状态
[root@youxi3 ~]# mysql -uroot -p123456 mysql> stop slave; Query OK, 0 rows affected, 1 warning (0.00 sec) mysql> change master to master_host=‘192.168.1.7‘, -> master_user=‘slave‘, -> master_password=‘123456‘, -> master_log_file=‘mysql-bin-master.000001‘, -> master_log_pos=154; Query OK, 0 rows affected, 2 warnings (0.08 sec) mysql> start slave; Query OK, 0 rows affected (0.02 sec) mysql> show slave status\G *************************** 1. row *************************** Slave_IO_State: Waiting for master to send event Master_Host: 192.168.1.7 Master_User: slave Master_Port: 3306 Connect_Retry: 60 Master_Log_File: mysql-bin-master.000001 Read_Master_Log_Pos: 154 Relay_Log_File: youxi2-relay-bin.000002 Relay_Log_Pos: 327 Relay_Master_Log_File: mysql-bin-master.000001 Slave_IO_Running: Yes Slave_SQL_Running: Yes
设置为只读,并关闭中转日志自动清理
mysql> set global read_only=1; //从表设置为只读,备用master的只读不能写入配置文件,因为有可能会升为master Query OK, 0 rows affected (0.00 sec) mysql> set global relay_log_purge=off; //从表关闭中转日志自动清理,因为MHA从库恢复过程依赖中转日志相关信息 Query OK, 0 rows affected (0.00 sec)
注意:如果防火墙是打开的,记得添加mysql的端口号。
[root@youxi3 ~]# firewall-cmd --permanent --zone=public --add-port=3306/tcp success [root@youxi3 ~]# firewall-cmd --reload success [root@youxi3 ~]# firewall-cmd --zone=public --list-ports 3306/tcp
3)配置slave2
创建同步数据库,并创建监控用的用户
[root@youxi4 ~]# mysql -uroot -p123456 mysql> create database test_db; Query OK, 1 row affected (0.00 sec) mysql> grant all privileges on *.* to ‘root‘@‘192.168.1.%‘ identified by ‘123456‘; //监控用的用户 Query OK, 0 rows affected, 1 warning (0.01 sec) mysql> flush privileges; //刷新权限表 Query OK, 0 rows affected (0.01 sec)
修改配置文件,重启mysqld
[root@youxi4 ~]# vim /etc/my.cnf server-id=3 [root@youxi4 ~]# systemctl restart mysqld
创建同步数据库,修改master信息,查看slave状态
[root@youxi4 ~]# mysql -uroot -p123456 mysql> stop slave; Query OK, 0 rows affected, 1 warning (0.00 sec) mysql> change master to master_host=‘192.168.1.7‘, -> master_user=‘slave‘, -> master_password=‘123456‘, -> master_log_file=‘mysql-bin-master.000001‘, -> master_log_pos=154; Query OK, 0 rows affected, 2 warnings (0.09 sec) mysql> start slave; Query OK, 0 rows affected (0.03 sec) mysql> show slave status\G *************************** 1. row *************************** Slave_IO_State: Waiting for master to send event Master_Host: 192.168.1.7 Master_User: slave Master_Port: 3306 Connect_Retry: 60 Master_Log_File: mysql-bin-master.000001 Read_Master_Log_Pos: 154 Relay_Log_File: youxi3-relay-bin.000002 Relay_Log_Pos: 327 Relay_Master_Log_File: mysql-bin-master.000001 Slave_IO_Running: Yes Slave_SQL_Running: Yes
设置为只读,并关闭中转日志自动清理
mysql> set global read_only=1; //从库设置为只读,非备用master可以写进配置文件 Query OK, 0 rows affected (0.00 sec) mysql> set global relay_log_purge=off; //从表关闭中转日志自动清理,因为MHA从库恢复过程依赖中转日志相关信息 Query OK, 0 rows affected (0.00 sec)
(7).配置MHA
创建工作目录
[root@youxi1 ~]# mkdir /etc/masterha [root@youxi1 ~]# mkdir -p /var/log/masterha/app1
在/usr/local/bin目录下创建脚本master_ip_failover(故障切换脚本,切换master的IP地址),并授权777
[root@youxi1 ~]# vim /usr/local/bin/master_ip_failover //内容直接复制 #!/usr/bin/env perl use strict; use warnings FATAL =>‘all‘; use Getopt::Long; my ( $command, $ssh_user, $orig_master_host, $orig_master_ip, $orig_master_port, $new_master_host, $new_master_ip, $new_master_port ); my $vip = ‘10.10.10.111/24‘; # Virtual IP my $key = "1"; my $ssh_start_vip = "/sbin/ifconfig ens160:$key $vip"; # Network name my $ssh_stop_vip = "/sbin/ifconfig ens160:$key down"; my $exit_code = 0; GetOptions( ‘command=s‘ => \$command, ‘ssh_user=s‘ => \$ssh_user, ‘orig_master_host=s‘ => \$orig_master_host, ‘orig_master_ip=s‘ => \$orig_master_ip, ‘orig_master_port=i‘ => \$orig_master_port, ‘new_master_host=s‘ => \$new_master_host, ‘new_master_ip=s‘ => \$new_master_ip, ‘new_master_port=i‘ => \$new_master_port, ); exit &main(); sub main { #print "\n\nIN SCRIPT TEST====$ssh_stop_vip==$ssh_start_vip===\n\n"; if ( $command eq "stop" || $command eq "stopssh" ) { # $orig_master_host, $orig_master_ip, $orig_master_port are passed. # If you manage master ip address at global catalog database, # invalidate orig_master_ip here. my $exit_code = 1; eval { print "\n\n\n***************************************************************\n"; print "Disabling the VIP - $vip on old master: $orig_master_host\n"; print "***************************************************************\n\n\n\n"; &stop_vip(); $exit_code = 0; }; if ($@) { warn "Got Error: $@\n"; exit $exit_code; } exit $exit_code; } elsif ( $command eq "start" ) { # all arguments are passed. # If you manage master ip address at global catalog database, # activate new_master_ip here. # You can also grant write access (create user, set read_only=0, etc) here. my $exit_code = 10; eval { print "\n\n\n***************************************************************\n"; print "Enabling the VIP - $vip on new master: $new_master_host \n"; print "***************************************************************\n\n\n\n"; &start_vip(); $exit_code = 0; }; if ($@) { warn $@; exit $exit_code; } exit $exit_code; } elsif ( $command eq "status" ) { print "Checking the Status of the script.. OK \n"; `ssh $ssh_user\@$orig_master_host \" $ssh_start_vip \"`; exit 0; } else { &usage(); exit 1; } } # A simple system call that enable the VIP on the new master sub start_vip() { `ssh $ssh_user\@$new_master_host \" $ssh_start_vip \"`; } # A simple system call that disable the VIP on the old_master sub stop_vip() { `ssh $ssh_user\@$orig_master_host \" $ssh_stop_vip \"`; } sub usage { print "Usage: master_ip_failover –command=start|stop|stopssh|status –orig_master_host=host –orig_master_ip=ip –orig_master_port=po rt –new_master_host=host –new_master_ip=ip –new_master_port=port\n"; } [root@youxi1 ~]# chmod 777 /usr/local/bin/master_ip_failover
在/etc/masterha下创建配置文件app1.cnf
[root@youxi1 ~]# vim /etc/masterha/app1.cnf [server default] manager_workdir=/var/log/masterha/app1 //manager工作目录 manager_log=/var/log/masterha/app1/manager.log //manager的日志 master_binlog_dir=/var/lib/mysql //master服务器保存二进制日志文件的位置 master_ip_failover_script=/usr/local/bin/master_ip_failover //自动故障切换时master服务器IP地址切换脚本,如果没有则不写此项 master_ip_online_change_script=/usr/local/bin/master_ip_online_change //手动切换时master服务器IP地址切换脚本,如果没有则不写此项(一般安装MHA时自带) user=root //监控用户 password=123456 //监控用户的密码 ping_interval=1 //监控主库时发送ping包的时间间隔,默认为3秒,如果连续3次没有回应将自动进行故障切换 remote_workdir=/tmp //Mysql在发生切换时二进制日志文件的保存位置 repl_user=slave //复制用户 repl_password=123456 //复制用户的密码 report_script=/usr/local/send_report //发生切换后发送的报警脚本 shutdown_script="" //故障发生后关闭故障主机的脚本,主要作用是关闭主机防止发生脑裂 ssh_user=root //ssh登录用户 [server1] hostname=192.168.1.7 port=3306 [server2] hostname=192.168.1.8 port=3306 candidate_master=1 //候选master,主从切换后升为master,即使复制事件不是最新的 check_repl_delay=0 //默认情况下,如果一个slave的中转日志落后master二进制日志100M,那么MHA就不会选择该slave作为新的master。但设置此项后MHA会忽略复制延迟,对候选master非常有用。 [server3] hostname=192.168.1.9 port=3306
检查管理节点到所有Node节点的ssh连接状态
[root@youxi1 ~]# masterha_check_ssh --conf=/etc/masterha/app1.cnf //检查通过 Fri Jun 21 23:50:21 2019 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping. Fri Jun 21 23:50:21 2019 - [info] Reading application default configuration from /etc/masterha/app1.cnf.. Fri Jun 21 23:50:21 2019 - [info] Reading server configuration from /etc/masterha/app1.cnf.. Fri Jun 21 23:50:21 2019 - [info] Starting SSH connection tests.. Fri Jun 21 23:50:22 2019 - [debug] Fri Jun 21 23:50:21 2019 - [debug] Connecting via SSH from root@192.168.1.7(192.168.1.7:22) to root@192.168.1.8(192.168.1.8:22).. Fri Jun 21 23:50:22 2019 - [debug] ok. Fri Jun 21 23:50:22 2019 - [debug] Connecting via SSH from root@192.168.1.7(192.168.1.7:22) to root@192.168.1.9(192.168.1.9:22).. Fri Jun 21 23:50:22 2019 - [debug] ok. Fri Jun 21 23:50:23 2019 - [debug] Fri Jun 21 23:50:22 2019 - [debug] Connecting via SSH from root@192.168.1.8(192.168.1.8:22) to root@192.168.1.7(192.168.1.7:22).. Fri Jun 21 23:50:22 2019 - [debug] ok. Fri Jun 21 23:50:22 2019 - [debug] Connecting via SSH from root@192.168.1.8(192.168.1.8:22) to root@192.168.1.9(192.168.1.9:22).. Fri Jun 21 23:50:23 2019 - [debug] ok. Fri Jun 21 23:50:24 2019 - [debug] Fri Jun 21 23:50:22 2019 - [debug] Connecting via SSH from root@192.168.1.9(192.168.1.9:22) to root@192.168.1.7(192.168.1.7:22).. Fri Jun 21 23:50:23 2019 - [debug] ok. Fri Jun 21 23:50:23 2019 - [debug] Connecting via SSH from root@192.168.1.9(192.168.1.9:22) to root@192.168.1.8(192.168.1.8:22).. Fri Jun 21 23:50:23 2019 - [debug] ok. Fri Jun 21 23:50:24 2019 - [info] All SSH connection tests passed successfully.
检查复制环境
[root@youxi1 ~]# masterha_check_repl --conf=/etc/masterha/app1.cnf MySQL Replication Health is OK. //最后提示OK就通过了
检查管理节点的状态
[root@youxi1 ~]# masterha_check_status --conf=/etc/masterha/app1.cnf app1 is stopped(2:NOT_RUNNING).
开启管理节点监控
/*--remove_dead_master_conf表示发生主从切换后,老的master服务器配置检查配置文件中删除 *--ignore_last_failover在缺省情况下,如果MHA检测到连续宕机,切间隔不足8小时,则不会进行故障切换,避免ping-pong效应。设置该参数表示忽略上次切换 *--manger_log日志存放文职*/ [root@youxi1 ~]# nohup masterha_manager --conf=/etc/masterha/app1.cnf --remove_dead_master_conf --ignore_last_failover < /dev/null > /var/log/masterha/app1/manager.log 2>&1 & [1] 9562 [root@youxi1 ~]# masterha_check_status --conf=/etc/masterha/app1.cnf //查看一下状态 app1 (pid:9562) is running(0:PING_OK), master:192.168.1.7
关闭管理节点监控
[root@youxi1 ~]# masterha_stop --conf=/etc/masterha/app1.cnf Stopped app1 successfully. [1]+ 退出 1 nohup masterha_manager --conf=/etc/masterha/app1.cnf --remove_dead_master_conf --ignore_last_failover < /dev/null > /var/log/masterha/app1/manager.log 2>&1 [root@youxi1 ~]# masterha_check_status --conf=/etc/masterha/app1.cnf app1 is stopped(2:NOT_RUNNING).
(8).测试
开启管理节点监控
[root@youxi1 ~]# nohup masterha_manager --conf=/etc/masterha/app1.cnf --remove_dead_master_conf --ignore_last_failover < /dev/null > /var/log/masterha/app1/manager.log 2>&1 & [1] 11267
关闭master服务器的mysqld
[root@youxi2 ~]# systemctl stop mysqld
回到管理节点查看日志文件,有以下一段
[root@youxi1 ~]# vim /var/log/masterha/app1/manager.log ----- Failover Report ----- app1: MySQL Master failover 192.168.1.7(192.168.1.7:3306) to 192.168.1.8(192.168.1.8:3306) succeeded Master 192.168.1.7(192.168.1.7:3306) is down! Check MHA Manager logs at youxi1:/var/log/masterha/app1/manager.log for details. Started automated(non-interactive) failover. Invalidated master IP address on 192.168.1.7(192.168.1.7:3306) The latest slave 192.168.1.8(192.168.1.8:3306) has all relay logs for recovery. Selected 192.168.1.8(192.168.1.8:3306) as a new master. 192.168.1.8(192.168.1.8:3306): OK: Applying all logs succeeded. 192.168.1.8(192.168.1.8:3306): OK: Activated master IP address. 192.168.1.9(192.168.1.9:3306): This host has the latest relay log events. Generating relay diff files from the latest slave succeeded. 192.168.1.9(192.168.1.9:3306): OK: Applying all logs succeeded. Slave started, replicating from 192.168.1.8(192.168.1.8:3306)
另外再去看配置文件,会发现[server1]模块被删除了,user=root也没了。
[root@youxi1 ~]# cat /etc/masterha/app1.cnf [server default] manager_log=/var/log/masterha/app1/manager.log manager_workdir=/var/log/masterha/app1 master_binlog_dir=/var/lib/mysql master_ip_failover_script=/usr/local/bin/master_ip_failover master_ip_online_change_script=/usr/local/bin/master_ip_online_change password=123456 ping_interval=1 remote_workdir=/tmp repl_user=slave repl_password=123456 report_script=/usr/local/send_report shutdown_script="" ssh_user=root user=root [server2] candidate_master=1 check_repl_delay=0 hostname=192.168.1.8 port=3306 [server3] hostname=192.168.1.9 port=3306
还可以前往slave1,备用master服务器上查看master状态
[root@youxi3 ~]# mysql -uroot -p123456 mysql> show master status\G *************************** 1. row *************************** File: mysql-bin-slave1.000001 Position: 154 Binlog_Do_DB: test_db Binlog_Ignore_DB: Executed_Gtid_Set: 1 row in set (0.00 sec)
标签:else host 修改 连接状态 技术 cut 信息 null get
原文地址:https://www.cnblogs.com/diantong/p/11055256.html