码迷,mamicode.com
首页 > 其他好文 > 详细

域间数据传递之域外为慢速数据

时间:2019-07-05 16:39:50      阅读:104      评论:0      收藏:0      [点我收藏+]

标签:sed   老师   tput   load   input   equals   ram   ril   signal   

域间数据传递之域外为慢速数据

域外慢速数据可以用事件来同步,具体参展王贞炎老师的《FPGA应用开发和仿真》4.5.4节。

这里给出一种Verilog实现方式。

sync_data.v

`timescale 1ns/100ps

module sync_data #(
  parameter NUM_OF_BITS = 1,
  parameter ASYNC_CLK = 1
) (
  input in_clk,
  input [NUM_OF_BITS-1:0] in_data,
  input out_clk,
  output reg [NUM_OF_BITS-1:0] out_data
);

generate
if (ASYNC_CLK == 1) begin

wire out_toggle;
wire in_toggle;

reg out_toggle_d1 = 1'b0;
reg in_toggle_d1 = 1'b0;

reg [NUM_OF_BITS-1:0] cdc_hold;

sync_bits i_sync_out (
  .in_bits(in_toggle_d1),
  .out_clk(out_clk),
  .out_resetn(1'b1),
  .out_bits(out_toggle)
);

sync_bits i_sync_in (
  .in_bits(out_toggle_d1),
  .out_clk(in_clk),
  .out_resetn(1'b1),
  .out_bits(in_toggle)
);

wire in_load = in_toggle == in_toggle_d1;
wire out_load = out_toggle ^ out_toggle_d1;

always @(posedge in_clk) begin
  if (in_load == 1'b1) begin
    cdc_hold <= in_data;
    in_toggle_d1 <= ~in_toggle_d1;
  end
end

always @(posedge out_clk) begin
  if (out_load == 1'b1) begin
    out_data <= cdc_hold;
  end
  out_toggle_d1 <= out_toggle;
end

end else begin
  always @(*) begin
    out_data <= in_data;
  end
end
endgenerate

endmodule

sync_bits.v

/*
 * Helper module for synchronizing bit signals from one clock domain to another.
 * It uses the standard approach of 2 FF in series.
 * Note, that while the module allows to synchronize multiple bits at once it is
 * only able to synchronize multi-bit signals where at max one bit changes per
 * clock cycle (e.g. a gray counter).
 */

`timescale 1ns/100ps

module sync_bits #(

  // Number of bits to synchronize
  parameter NUM_OF_BITS = 1,
  // Whether input and output clocks are asynchronous, if 0 the synchronizer will
  // be bypassed and the output signal equals the input signal.
  parameter ASYNC_CLK = 1)(

  input [NUM_OF_BITS-1:0] in_bits,
  input out_resetn,
  input out_clk,
  output [NUM_OF_BITS-1:0] out_bits);

generate if (ASYNC_CLK == 1) begin
  reg [NUM_OF_BITS-1:0] cdc_sync_stage1 = 'h0;
  reg [NUM_OF_BITS-1:0] cdc_sync_stage2 = 'h0;

  always @(posedge out_clk)
  begin
    if (out_resetn == 1'b0) begin
      cdc_sync_stage1 <= 'b0;
      cdc_sync_stage2 <= 'b0;
    end else begin
      cdc_sync_stage1 <= in_bits;
      cdc_sync_stage2 <= cdc_sync_stage1;
    end
  end

  assign out_bits = cdc_sync_stage2;
end else begin
  assign out_bits = in_bits;
end endgenerate

endmodule

域间数据传递之域外为慢速数据

标签:sed   老师   tput   load   input   equals   ram   ril   signal   

原文地址:https://www.cnblogs.com/liqi120150/p/11139189.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!