标签：fail eve connected min int list elf ges top
Top 5 Reasons To Get MUT-3
1. Software Version: V2014.3
2. Supported Languages: English, French, Spainsh, Thai,Vietnamese, Czech, German, Greek, Italian, Turkish, Russian, Chinese
3. Supported Both Diagnosis and ECU Program
4. Support Both Cars and Trucks, Cars before Year 2013, Trucks before Year 2012
5. Update By CD
Notice:
IE Requirement: IE6.0 or 8.0
Mitsubishi MUT-3 Diagnostic Tool Advantage:
1. Never lock machine
2. Free update
3. With CF Card
4. Support gasoline vehicles(car) and Diesel vehicles( trucks, bus),
Operation system: Windows xp
IE requirement: IE 6.0 or 8.0
.jpg)
MUT-3 Description:
A
personal computer (PC) is connected to the MUTIII unit and used as a
system‘s control terminal, and communicates with a vehicle ECU through
the VCI. In addition to being able to handle all diagnosis functions
covered by the conventional MUT-II tester, the MUT-III system can
display data as easy-to-understand diagrams and graphs on a large screen
of the PC. Unlike the MUT-II, the MUT-III can retain data on all
vehicles, from old to new models, classified according to destination in
the PC‘s hard disk. This eliminates the awkward but essential job with
the MUT-II, of switching the data list (communications protocol data and
diagnosis item list database) by replacing the ROM pack with another
according to the vehicle model and year model.
MUT-3 Function:
New
functions that make use of the advantages of the PC are also being
developed. For example, the workshop manual viewer is a useful function
for mechanics as they no longer have to carry around a thick manual and
search for relevant pages while working on a vehicle. The workshop
manual viewer is currently available for certain vehicle models, and
allows users to retrieve the pages containing the failure code for a
particular problem at the push of a button.
MUT-3 Set Includes
1 Vehicle Communication Interface (V.C.I.) (MB991824)
A communication interface used to connect the vehicle ECUs and the PC.
1) When connected with the PC
-Vehicle diagnosis (Interactive fault diagnosis)
-SWS communication; CAN communication support
-Drive recorder
-Volt, Ohm, measurement
-Fuel pressure measurement (Not available in US)
2) When used with the V.C.I.unit (disconnected from PC)
-V.C.I. Stand-alone diagnosis
-Drive recorder
-ECU reprogramming
-Volt,Ohm measurement
-Belt Tension measurement
2 Memory Card
Stores data for ECU reprogramming, drive recorder, etc.
This is a standard, off-the-shelf memory card. The one provided (with reprogramming data) is a Compact Flash memory card (MB991853) inserted into the CF card adapter (MB991939).
.jpg)
3 M.U.T.-III Main Harness A (MB991910)
Used when connecting the V.C.I. with vehicles that have only one 16-pin diagnosis connector.
-Supports fault diagnosis and ECU updating on the above-described vehicles
-Supports the CAN communication system
4 M.U.T.-III Main Harness B (MB991911)
Used when connecting V.C.I. with vehicles that have a16-pin + 12-pin or 16-pin + 13-pin diagnosis connector.
For models
equipped with only 12-pin (or 12-pin + 12-pin)diagnosis connector,
connect the M.U.T.-II adapter harness(MB991498) to the end of this
harness in the same as M.U.T.-II, and power is supplied from the
cigarette lighter socket.
Mitsubishi MUT-3 Diagnostic Tool
标签：fail eve connected min int list elf ges top
原文地址：https://www.cnblogs.com/obd2tool/p/11145806.html
