tcp协议粘包问题

from socket import *

client = socket(AF_INET, SOCK_STREAM)
client.connect((‘127.0.0.1‘, 8081))

# 通信循环
while True:
    cmd=input(‘>>: ‘).strip()
    if len(cmd) == 0:continue
    client.send(cmd.encode(‘utf-8‘))
    cmd_res=client.recv(1024)
    print(cmd_res.decode(‘gbk‘))

client.close()

# 服务端必须满足至少三点:
# 1. 绑定一个固定的ip和port
# 2. 一直对外提供服务,稳定运行
# 3. 能够支持并发
from socket import *
import subprocess

server = socket(AF_INET, SOCK_STREAM)
server.bind((‘127.0.0.1‘, 8081))
server.listen(5)

# 链接循环
while True:
    conn, client_addr = server.accept()
    print(client_addr)

    # 通信循环
    while True:
        try:
            cmd = conn.recv(1024) #cmd=b‘dir‘
            if len(cmd) == 0: break  # 针对linux系统
            obj=subprocess.Popen(cmd.decode(‘utf-8‘),
                             shell=True,
                             stdout=subprocess.PIPE,
                             stderr=subprocess.PIPE
                             )
            stdout=obj.stdout.read()
            stderr=obj.stderr.read()
            print(len(stdout) + len(stderr))
            conn.send(stdout+stderr)
        except ConnectionResetError:
            break

    conn.close()

server.close()

from socket import *

client = socket(AF_INET, SOCK_STREAM)
client.connect((‘127.0.0.1‘, 8081))

# tcp协议会将数据量较小且发送时间间隔较短的数据合并成一个数据报发送
client.send(b‘hello‘)
client.send(b‘world‘)
client.send(b‘egon‘)

from socket import *

server = socket(AF_INET, SOCK_STREAM)
server.bind((‘127.0.0.1‘, 8081))
server.listen(5)

conn,_=server.accept()
data1=conn.recv(5)
print(‘第一次收: ‘,data1)

data2=conn.recv(5)
print(‘第二次收: ‘,data2)

data3=conn.recv(4)
print(‘第三次收: ‘,data3)

from socket import *
import struct

client = socket(AF_INET, SOCK_STREAM)
client.connect((‘127.0.0.1‘, 8081))

# 通信循环
while True:
    cmd=input(‘>>: ‘).strip()
    if len(cmd) == 0:continue
    client.send(cmd.encode(‘utf-8‘))
    #1. 先收报头,从报头里解出数据的长度
    header=client.recv(4)
    total_size=struct.unpack(‘i‘,header)[0]
    #2. 接收真正的数据
    cmd_res=b‘‘
    recv_size=0
    while recv_size < total_size:
        data=client.recv(1024)
        recv_size+=len(data)
        cmd_res+=data

    print(cmd_res.decode(‘gbk‘))

client.close()

# 服务端必须满足至少三点:
# 1. 绑定一个固定的ip和port
# 2. 一直对外提供服务,稳定运行
# 3. 能够支持并发
from socket import *
import subprocess
import struct

server = socket(AF_INET, SOCK_STREAM)
server.bind((‘127.0.0.1‘, 8081))
server.listen(5)

# 链接循环
while True:
    conn, client_addr = server.accept()
    print(client_addr)

    # 通信循环
    while True:
        try:
            cmd = conn.recv(1024) #cmd=b‘dir‘
            if len(cmd) == 0: break  # 针对linux系统
            obj=subprocess.Popen(cmd.decode(‘utf-8‘),
                             shell=True,
                             stdout=subprocess.PIPE,
                             stderr=subprocess.PIPE
                             )
            stdout=obj.stdout.read()
            stderr=obj.stderr.read()
            # 1. 先制作固定长度的报头
            header=struct.pack(‘i‘,len(stdout) + len(stderr))
            # 2. 再发送报头
            conn.send(header)
            # 3. 最后发送真实的数据
            conn.send(stdout)
            conn.send(stderr)
        except ConnectionResetError:
            break

    conn.close()

server.close()

from socket import *
import struct
import json

client = socket(AF_INET, SOCK_STREAM)
client.connect((‘127.0.0.1‘, 8081))

# 通信循环
while True:
    cmd=input(‘>>: ‘).strip()
    if len(cmd) == 0:continue
    client.send(cmd.encode(‘utf-8‘))
    #1. 先收4bytes,解出报头的长度
    header_size=struct.unpack(‘i‘,client.recv(4))[0]

    #2. 再接收报头,拿到header_dic
    header_bytes=client.recv(header_size)
    header_json=header_bytes.decode(‘utf-8‘)
    header_dic=json.loads(header_json)
    print(header_dic)
    total_size=header_dic[‘total_size‘]

    #3. 接收真正的数据
    cmd_res=b‘‘
    recv_size=0
    while recv_size < total_size:
        data=client.recv(1024)
        recv_size+=len(data)
        cmd_res+=data

    print(cmd_res.decode(‘gbk‘))

client.close()

# 服务端必须满足至少三点:
# 1. 绑定一个固定的ip和port
# 2. 一直对外提供服务,稳定运行
# 3. 能够支持并发
from socket import *
import subprocess
import struct
import json

server = socket(AF_INET, SOCK_STREAM)
server.bind((‘127.0.0.1‘, 8081))
server.listen(5)

# 链接循环
while True:
    conn, client_addr = server.accept()
    print(client_addr)

    # 通信循环
    while True:
        try:
            cmd = conn.recv(1024)  # cmd=b‘dir‘
            if len(cmd) == 0: break  # 针对linux系统
            obj = subprocess.Popen(cmd.decode(‘utf-8‘),
                                   shell=True,
                                   stdout=subprocess.PIPE,
                                   stderr=subprocess.PIPE
                                   )
            stdout = obj.stdout.read()
            stderr = obj.stderr.read()
            # 1. 先制作报头
            header_dic = {
                ‘filename‘: ‘a.txt‘,
                ‘md5‘: ‘asdfasdf123123x1‘,
                ‘total_size‘: len(stdout) + len(stderr)
            }
            header_json = json.dumps(header_dic)
            header_bytes = header_json.encode(‘utf-8‘)

            # 2. 先发送4个bytes(包含报头的长度)
            conn.send(struct.pack(‘i‘, len(header_bytes)))
            # 3  再发送报头
            conn.send(header_bytes)

            # 4. 最后发送真实的数据
            conn.send(stdout)
            conn.send(stderr)
        except ConnectionResetError:
            break

    conn.close()

server.close()

import struct

obj1=struct.pack(‘i‘,1332)
print(obj1,len(obj1))
# 结果：b‘4\x05\x00\x00‘ 4
res1=struct.unpack(‘i‘,obj1)
print(res1[0])
#结果：1332
obj1=struct.pack(‘q‘,1332)
print(obj1,len(obj1))
# 结果：b‘4\x05\x00\x00\x00\x00\x00\x00‘ 8



import json

header_dic={
                ‘filename‘:‘a.txt‘,
                ‘md5‘:‘asdfasdf123123x1‘,
                ‘total_size‘:12312311111111111111111111111111111111111111123
            }

header_json=json.dumps(header_dic)
print(header_json)
#结果：
# {"filename": "a.txt", "md5": "asdfasdf123123x1", "total_size": 123123111111111111111111。。。}
header_bytes=header_json.encode(‘utf-8‘)
print(len(header_bytes))
# 结果：502