标签:开启 width 端口 normal ble 链路 配置信息 prot stp
配置边缘端口和开启BPDU保护:
[HW-SW3]stp bpdu-protection //SW3开启全局BPDU保护
[HW-SW3]interface GigabitEthernet 0/0/1 //配置g0/0/1口
[HW-SW3-GigabitEthernet0/0/1]stp edged-port disable //不开启边缘端口
[HW-SW3-GigabitEthernet0/0/1]int g 0/0/3 //配置g0/0/3口
[HW-SW3-GigabitEthernet0/0/3]stp edged-port disable //不开启边缘端口
[HW-SW3]stp edged-port default //开启全局边缘端口
***//开启全局bpdu保护前需要把trunk链路不开启边缘端口
[HW-SW3]display cu | i stp
stp edged-port default
stp mode stp
stp bpdu-protection
stp edged-port disable
stp edged-port disable
================================================
静态聚合:
[HW-SW1]int Eth-Trunk 12 //创建Eth-Trunk 12
[HW-SW1-Eth-Trunk12]trunkport g 0/0/5 to 0/0/6 //绑定端口5和6
[HW-SW2]int Eth-Trunk 12 //创建Eth-Trunk 12
[HW-SW2-Eth-Trunk12]trunkport g 0/0/5 to 0/0/6 //绑定端口5和6
PortName Status Weight
GigabitEthernet0/0/5 Up 1
GigabitEthernet0/0/6 Up 1
标签:开启 width 端口 normal ble 链路 配置信息 prot stp
原文地址:https://blog.51cto.com/63736/2428020