标签：err reset 开启 yun dem 大量 hand 操作 新版本
Kafka作为分布式MQ，大量用于分布式系统中，如消息推送系统、业务平台系统（如结算平台），就拿结算来说，业务方作为上游把数据打到结算平台，如果一份数据被计算、处理了多次，产生的后果将会特别严重。
使用Kafka时,需要保证exactly-once语义。要知道在分布式系统中，出现网络分区是不可避免的，如果kafka broker 在回复ack时，出现网络故障或者是full gc导致ack timeout，producer将会重发，如何保证producer重试时不造成重复or乱序？又或者producer 挂了，新的producer并没有old producer的状态数据，这个时候如何保证幂等？即使Kafka 发送消息满足了幂等，consumer拉取到消息后，把消息交给线程池workers，workers线程对message的处理可能包含异步操作，又会出现以下情况：
本文将针对以上问题作出讨论
? ? ? 针对以上的问题，kafka在0.11版新增了幂等型producer和事务型producer。前者解决了单会话幂等性等问题，后者解决了多会话幂等性。
? ? 为解决producer重试引起的乱序和重复。Kafka增加了pid和seq。Producer中每个RecordBatch都有一个单调递增的seq; Broker上每个tp也会维护pid-seq的映射，并且每Commit都会更新lastSeq。这样recordBatch到来时，broker会先检查RecordBatch再保存数据：如果batch中 baseSeq(第一条消息的seq)比Broker维护的序号(lastSeq)大1，则保存数据，否则不保存(inSequence方法)。
ProducerStateManager.scala
private def maybeValidateAppend(producerEpoch: Short, firstSeq: Int, offset: Long): Unit = {
validationType match {
case ValidationType.None =>
case ValidationType.EpochOnly =>
checkProducerEpoch(producerEpoch, offset)
case ValidationType.Full =>
checkProducerEpoch(producerEpoch, offset)
checkSequence(producerEpoch, firstSeq, offset)
}
}
private def checkSequence(producerEpoch: Short, appendFirstSeq: Int, offset: Long): Unit = {
if (producerEpoch != updatedEntry.producerEpoch) {
if (appendFirstSeq != 0) {
if (updatedEntry.producerEpoch != RecordBatch.NO_PRODUCER_EPOCH) {
throw new OutOfOrderSequenceException(s"Invalid sequence number for new epoch at offset $offset in " +
s"partition $topicPartition: $producerEpoch (request epoch), $appendFirstSeq (seq. number)")
} else {
throw new UnknownProducerIdException(s"Found no record of producerId=$producerId on the broker at offset $offset" +
s"in partition $topicPartition. It is possible that the last message with the producerId=$producerId has " +
"been removed due to hitting the retention limit.")
}
}
} else {
val currentLastSeq = if (!updatedEntry.isEmpty)
updatedEntry.lastSeq
else if (producerEpoch == currentEntry.producerEpoch)
currentEntry.lastSeq
else
RecordBatch.NO_SEQUENCE
if (currentLastSeq == RecordBatch.NO_SEQUENCE && appendFirstSeq != 0) {
// We have a matching epoch, but we do not know the next sequence number. This case can happen if
// only a transaction marker is left in the log for this producer. We treat this as an unknown
// producer id error, so that the producer can check the log start offset for truncation and reset
// the sequence number. Note that this check follows the fencing check, so the marker still fences
// old producers even if it cannot determine our next expected sequence number.
throw new UnknownProducerIdException(s"Local producer state matches expected epoch $producerEpoch " +
s"for producerId=$producerId at offset $offset in partition $topicPartition, but the next expected " +
"sequence number is not known.")
} else if (!inSequence(currentLastSeq, appendFirstSeq)) {
throw new OutOfOrderSequenceException(s"Out of order sequence number for producerId $producerId at " +
s"offset $offset in partition $topicPartition: $appendFirstSeq (incoming seq. number), " +
s"$currentLastSeq (current end sequence number)")
}
}
}
private def inSequence(lastSeq: Int, nextSeq: Int): Boolean = {
nextSeq == lastSeq + 1L || (nextSeq == 0 && lastSeq == Int.MaxValue)
}? ? ?假设我们有5个请求，batch1、batch2、batch3、batch4、batch5；如果只有batch2 ack failed，3、4、5都保存了，那2将会随下次batch重发而造成重复。我们可以设置max.in.flight.requests.per.connection=1（客户端在单个连接上能够发送的未响应请求的个数）来解决乱序，但降低了系统吞吐。
新版本kafka设置enable.idempotence=true后能够动态调整max-in-flight-request。正常情况下max.in.flight.requests.per.connection大于1。当重试请求到来且时，batch 会根据 seq重新添加到队列的合适位置，并把max.in.flight.requests.per.connection设为1，这样它 前面的 batch序号都比它小，只有前面的都发完了，它才能发。
private void insertInSequenceOrder(Deque<ProducerBatch> deque, ProducerBatch batch) {
// When we are requeing and have enabled idempotence, the reenqueued batch must always have a sequence.
if (batch.baseSequence() == RecordBatch.NO_SEQUENCE)
throw new IllegalStateException("Trying to re-enqueue a batch which doesn't have a sequence even " +
"though idempotency is enabled.");
if (transactionManager.nextBatchBySequence(batch.topicPartition) == null)
throw new IllegalStateException("We are re-enqueueing a batch which is not tracked as part of the in flight " +
"requests. batch.topicPartition: " + batch.topicPartition + "; batch.baseSequence: " + batch.baseSequence());
ProducerBatch firstBatchInQueue = deque.peekFirst();
if (firstBatchInQueue != null && firstBatchInQueue.hasSequence() && firstBatchInQueue.baseSequence() < batch.baseSequence()) {
List<ProducerBatch> orderedBatches = new ArrayList<>();
while (deque.peekFirst() != null && deque.peekFirst().hasSequence() && deque.peekFirst().baseSequence() < batch.baseSequence())
orderedBatches.add(deque.pollFirst());
log.debug("Reordered incoming batch with sequence {} for partition {}. It was placed in the queue at " +
"position {}", batch.baseSequence(), batch.topicPartition, orderedBatches.size());
// Either we have reached a point where there are batches without a sequence (ie. never been drained
// and are hence in order by default), or the batch at the front of the queue has a sequence greater
// than the incoming batch. This is the right place to add the incoming batch.
deque.addFirst(batch);
// Now we have to re insert the previously queued batches in the right order.
for (int i = orderedBatches.size() - 1; i >= 0; --i) {
deque.addFirst(orderedBatches.get(i));
}
// At this point, the incoming batch has been queued in the correct place according to its sequence.
} else {
deque.addFirst(batch);
}
}? ? ?在单会话幂等性中介绍，kafka通过引入pid和seq来实现单会话幂等性，但正是引入了pid，当应用重启时，新的producer并没有old producer的状态数据。可能重复保存。
Kafka事务通过隔离机制来实现多会话幂等性
kafka事务引入了transactionId 和Epoch，设置transactional.id后，一个transactionId只对应一个pid, 且Server 端会记录最新的 Epoch 值。这样有新的producer初始化时，会向TransactionCoordinator发送InitPIDRequest请求， TransactionCoordinator 已经有了这个 transactionId对应的 meta，会返回之前分配的 PID，并把 Epoch 自增 1 返回，这样当old producer恢复过来请求操作时，将被认为是无效producer抛出异常。 如果没有开启事务，TransactionCoordinator会为新的producer返回new pid，这样就起不到隔离效果，因此无法实现多会话幂等。
private def maybeValidateAppend(producerEpoch: Short, firstSeq: Int, offset: Long): Unit = {
validationType match {
case ValidationType.None =>
case ValidationType.EpochOnly =>
checkProducerEpoch(producerEpoch, offset)
case ValidationType.Full => //开始事务，执行这个判断
checkProducerEpoch(producerEpoch, offset)
checkSequence(producerEpoch, firstSeq, offset)
}
}
private def checkProducerEpoch(producerEpoch: Short, offset: Long): Unit = {
if (producerEpoch < updatedEntry.producerEpoch) {
throw new ProducerFencedException(s"Producer's epoch at offset $offset is no longer valid in " +
s"partition $topicPartition: $producerEpoch (request epoch), ${updatedEntry.producerEpoch} (current epoch)")
}
}如上所述，consumer拉取到消息后，把消息交给线程池workers，workers对message的handle可能包含异步操作，又会出现以下情况：
对此我们常用的方法时，works取到消息后先执行如下code：
if(cache.contain(msgId)){
// cache中包含msgId，已经处理过
continue;
}else {
lock.lock();
cache.put(msgId,timeout);
commitSync();
lock.unLock();
}
// 后续完成所有操作后，删除cache中的msgId，只要msgId存在cache中，就认为已经处理过。Note：需要给cache设置有消息如果喜欢我的文章，请长按二维码，关注靳刚同学
您的转发是对我最大的支持，谢谢！
标签：err reset 开启 yun dem 大量 hand 操作 新版本
原文地址：https://www.cnblogs.com/jingangtx/p/11330338.html
