flask的run的运行参数含义

https://www.cnblogs.com/shengulong/p/8111221.html

    def run(self, host=None, port=None, debug=None, **options):
        """Runs the application on a local development server.  If the
        :attr:`debug` flag is set the server will automatically reload
        for code changes and show a debugger in case an exception happened.
　　　　　debug模式可以在代码变化后自动快速重启应用，使变化生效，同时在代码异常时打印出调试代码　
        If you want to run the application in debug mode, but disable the
        code execution on the interactive debugger, you can pass
        ``use_evalex=False`` as parameter.  This will keep the debugger‘s
        traceback screen active, but disable code execution.
        use_evalex参数的含义是，在代码错误时，仍然抛出错误栈，但是同时又(安全考虑)避免代码执行,这样，你在页面错误时，能看到堆栈信息，但是又没有办法使用console
        .. admonition:: Keep in Mind

           Flask will suppress any server error with a generic error page
           unless it is in debug mode.  As such to enable just the
           interactive debugger without the code reloading, you have to
           invoke :meth:`run` with ``debug=True`` and ``use_reloader=False``.
           Setting ``use_debugger`` to `True` without being in debug mode
           won‘t catch any exceptions because there won‘t be any to
           catch.
　　　　　　在debug模式下，如果不使用代码变化后快速重启应用使修改代码生效的功能的话，使用参数use_reloader=False。在非debug模式下使用use_debugger参数是不会获取异常栈的

        .. versionchanged:: 0.10
           The default port is now picked from the ``SERVER_NAME`` variable.

        :param host: the hostname to listen on. Set this to ``‘0.0.0.0‘`` to
                     have the server available externally as well. Defaults to
                     ``‘127.0.0.1‘``.
        :param port: the port of the webserver. Defaults to ``5000`` or the
                     port defined in the ``SERVER_NAME`` config variable if
                     present.
        :param debug: if given, enable or disable debug mode.
                      See :attr:`debug`.
        :param options: the options to be forwarded to the underlying
                        Werkzeug server.  See
                        :func:`werkzeug.serving.run_simple` for more
                        information.
        """
        flask的run函数实际是调用了Werkzeug的run_simple函数，因此还有一些可用参数，可以通过options参数传递给run_simple函数

        from werkzeug.serving import run_simple
        if host is None:
            host = ‘127.0.0.1‘
        if port is None:
            server_name = self.config[‘SERVER_NAME‘]
            if server_name and ‘:‘ in server_name:
                port = int(server_name.rsplit(‘:‘, 1)[1])
            else:
                port = 5000
        if debug is not None:
            self.debug = bool(debug)
        options.setdefault(‘use_reloader‘, self.debug)
        options.setdefault(‘use_debugger‘, self.debug)
        try:
            run_simple(host, port, self, **options)
        finally:
            # reset the first request information if the development server
            # resetted normally.  This makes it possible to restart the server
            # without reloader and that stuff from an interactive shell.
            self._got_first_request = False

def run_simple(hostname, port, application, use_reloader=False,
               use_debugger=False, use_evalex=True,
               extra_files=None, reloader_interval=1,
               reloader_type=‘auto‘, threaded=False,
               processes=1, request_handler=None, static_files=None,
               passthrough_errors=False, ssl_context=None):
    """Start a WSGI application. Optional features include a reloader,
    multithreading and fork support.

    This function has a command-line interface too::

        python -m werkzeug.serving --help

    .. versionadded:: 0.5
       `static_files` was added to simplify serving of static files as well
       as `passthrough_errors`.

    .. versionadded:: 0.6
       support for SSL was added.

    .. versionadded:: 0.8
       Added support for automatically loading a SSL context from certificate
       file and private key.

    .. versionadded:: 0.9
       Added command-line interface.

    .. versionadded:: 0.10
       Improved the reloader and added support for changing the backend
       through the `reloader_type` parameter.  See :ref:`reloader`
       for more information.

    :param hostname: The host for the application.  eg: ``‘localhost‘``
    :param port: The port for the server.  eg: ``8080``
    :param application: the WSGI application to execute
    :param use_reloader: should the server automatically restart the python
                         process if modules were changed?
    :param use_debugger: should the werkzeug debugging system be used?
    :param use_evalex: should the exception evaluation feature be enabled?
    :param extra_files: a list of files the reloader should watch
                        additionally to the modules.  For example configuration
                        files.
    :param reloader_interval: the interval for the reloader in seconds.
    :param reloader_type: the type of reloader to use.  The default is
                          auto detection.  Valid values are ``‘stat‘`` and
                          ``‘watchdog‘``. See :ref:`reloader` for more
                          information.
    :param threaded: should the process handle each request in a separate
                     thread?
    这个参数的含义是：是否为每个请求开启一个线程
    :param processes: if greater than 1 then handle each request in a new process
                      up to this maximum number of concurrent processes.
    这个参数的含义是：是否为每一个请求开启一个进程，直到达到设置的并发进程的最大值
    :param request_handler: optional parameter that can be used to replace
                            the default one.  You can use this to replace it
                            with a different
                            :class:`~BaseHTTPServer.BaseHTTPRequestHandler`
                            subclass.
    :param static_files: a dict of paths for static files.  This works exactly
                         like :class:`SharedDataMiddleware`, it‘s actually
                         just wrapping the application in that middleware before
                         serving.
    :param passthrough_errors: set this to `True` to disable the error catching.
                               This means that the server will die on errors but
                               it can be useful to hook debuggers in (pdb etc.)
    这个参数将会禁止获取错误信息，但是也意为着一旦出现错误，服务器就会挂掉。这个参数在pdb调试时，很有用处
    :param ssl_context: an SSL context for the connection. Either an
                        :class:`ssl.SSLContext`, a tuple in the form
                        ``(cert_file, pkey_file)``, the string ``‘adhoc‘`` if
                        the server should automatically create one, or ``None``
                        to disable SSL (which is the default).
　　https的设置：默认是None
    """
    if use_debugger:
        from werkzeug.debug import DebuggedApplication
        application = DebuggedApplication(application, use_evalex)
    if static_files:
        from werkzeug.wsgi import SharedDataMiddleware
        application = SharedDataMiddleware(application, static_files)

    def log_startup(sock):
        display_hostname = hostname not in (‘‘, ‘*‘) and hostname or ‘localhost‘
        if ‘:‘ in display_hostname:
            display_hostname = ‘[%s]‘ % display_hostname
        quit_msg = ‘(Press CTRL+C to quit)‘
        port = sock.getsockname()[1]
        _log(‘info‘, ‘ * Running on %s://%s:%d/ %s‘,
             ssl_context is None and ‘http‘ or ‘https‘,
             display_hostname, port, quit_msg)

    def inner():
        try:
            fd = int(os.environ[‘WERKZEUG_SERVER_FD‘])
        except (LookupError, ValueError):
            fd = None
        srv = make_server(hostname, port, application, threaded,
                          processes, request_handler,
                          passthrough_errors, ssl_context,
                          fd=fd)
        if fd is None:
            log_startup(srv.socket)
        srv.serve_forever()

    if use_reloader:
        # If we‘re not running already in the subprocess that is the
        # reloader we want to open up a socket early to make sure the
        # port is actually available.
        if os.environ.get(‘WERKZEUG_RUN_MAIN‘) != ‘true‘:
            if port == 0 and not can_open_by_fd:
                raise ValueError(‘Cannot bind to a random port with enabled ‘
                                 ‘reloader if the Python interpreter does ‘
                                 ‘not support socket opening by fd.‘)

            # Create and destroy a socket so that any exceptions are
            # raised before we spawn a separate Python interpreter and
            # lose this ability.
            address_family = select_ip_version(hostname, port)
            s = socket.socket(address_family, socket.SOCK_STREAM)
            s.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
            s.bind((hostname, port))
            if hasattr(s, ‘set_inheritable‘):
                s.set_inheritable(True)

            # If we can open the socket by file descriptor, then we can just
            # reuse this one and our socket will survive the restarts.
            if can_open_by_fd:
                os.environ[‘WERKZEUG_SERVER_FD‘] = str(s.fileno())
                s.listen(LISTEN_QUEUE)
                log_startup(s)
            else:
                s.close()

        # Do not use relative imports, otherwise "python -m werkzeug.serving"
        # breaks.
        from werkzeug._reloader import run_with_reloader
        run_with_reloader(inner, extra_files, reloader_interval,
                          reloader_type)
    else:
        inner()