码迷,mamicode.com
首页 > 其他好文 > 详细

istio 1.2.5及istio-cni 部署

时间:2019-09-12 10:15:23      阅读:105      评论:0      收藏:0      [点我收藏+]

标签:cookie   path   nav   priority   sample   osc   expec   oci   -name   

环境
操作系统:CentOS Linux release 7.6.1810 (Core)
内核版本:Linux node03 3.10.0-957.21.3.el7.x86_64 #1 SMP Tue Jun 18 16:35:19 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
kubernetes:Server Version: version.Info{Major:"1", Minor:"14", GitVersion:"v1.14.6", GitCommit:"96fac5cd13a5dc064f7d9f4f23030a6aeface6cc", GitTreeState:"archive", BuildDate:"2019-08-22T01:38:12Z", GoVersion:"go1.12.7", Compiler:"gc", Platform:"linux/amd64"}
kubectl:Client Version: version.Info{Major:"1", Minor:"15", GitVersion:"v1.15.3", GitCommit:"2d3c76f9091b6bec110a5e63777c332469e0cba2", GitTreeState:"archive", BuildDate:"2019-09-04T10:28:54Z", GoVersion:"go1.12.9", Compiler:"gc", Platform:"linux/amd64"}
操作机系统:win10 on Ubuntu 18.04.3 LTS
helm:version.BuildInfo{Version:"v3.0.0-beta.3", GitCommit:"5cb923eecbe80d1ad76399aee234717c11931d9a", GitTreeState:"clean", GoVersion:"go1.12.9"}
# 说明: helm 与以前的版本不兼容一定谨慎可以多版本一起使用
istio:1.2.5

下载 Istio 发布包

#下载Istio
curl -L https://git.io/getLatestIstio | ISTIO_VERSION=1.2.5 sh -
# 进入 Istio 包目录
 cd istio-1.2.5
# 安装目录中包含:
#在 install/ 目录中包含了 Kubernetes 安装所需的 .yaml 文件
#samples/ 目录中是示例应用
#istioctl 客户端文件保存在 bin/ 目录之中。istioctl 的功能是手工进行 Envoy Sidecar 的注入。
#istio.VERSION 配置文件
#把 istioctl 客户端加入 PATH 环境变量,可以这样实现:
echo export PATH=$PWD/bin:\$PATH >>/etc/profile
. /etc/profile
 export PATH=$PWD/bin:$PATH
 # 一定要配置客户端环境变量k8s v1.14.6 不能自动注入配置自动注入会出现pod不能生成的问题

修改Istio & values配置

cd install/kubernetes/helm/istio
#本人修改的地方请对照修改 values.yaml
# Top level istio values file has the following sections.
#
# global: This file is the authoritative and exhaustive source for the global section.
#
# chart sections: Every subdirectory inside the charts/ directory has a top level
#       configuration key in this file. This file overrides the values specified
#       by the charts/${chartname}/values.yaml.
#       Check the chart level values file for exhaustive list of configuration options.

#
# Gateways Configuration, refer to the charts/gateways/values.yaml
# for detailed configuration
#
gateways:
  enabled: true

#
# sidecar-injector webhook configuration, refer to the
# charts/sidecarInjectorWebhook/values.yaml for detailed configuration
#
sidecarInjectorWebhook:
  enabled: true

#
# galley configuration, refer to charts/galley/values.yaml
# for detailed configuration
#
galley:
  enabled: true

#
# mixer configuration
#
# @see charts/mixer/values.yaml, it takes precedence
mixer:
  policy:
    # if policy is enabled the global.disablePolicyChecks has affect.
    enabled: true

  telemetry:
    enabled: true
#
# pilot configuration
#
# @see charts/pilot/values.yaml
pilot:
  enabled: true

#
# security configuration
#
security:
  enabled: true

#
# nodeagent configuration
#
nodeagent:
  enabled: false

#
# addon grafana configuration
#
grafana:
  enabled: true

#
# addon prometheus configuration
#
prometheus:
  enabled: true

#
# addon jaeger tracing configuration
#
tracing:
  enabled: true

#
# addon kiali tracing configuration
#
kiali:
  enabled: true

#
# addon certmanager configuration
#
certmanager:
  enabled: false

#
# Istio CNI plugin enabled
#   This must be enabled to use the CNI plugin in Istio.  The CNI plugin is installed separately.
#   If true, the privileged initContainer istio-init is not needed to perform the traffic redirect
#   settings for the istio-proxy.
#
istio_cni:
  enabled: true

# addon Istio CoreDNS configuration
#
istiocoredns:
  enabled: false

# Common settings used among istio subcharts.
global:
  # Default hub for Istio images.
  # Releases are published to docker hub under ‘istio‘ project.
  # Daily builds from prow are on gcr.io, and nightly builds from circle on docker.io/istionightly
  hub: docker.io/istio

  # Default tag for Istio images.
  tag: 1.2.5

  # Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>
  # The control plane has different scopes depending on component, but can configure default log level across all components
  # If empty, default scope and level will be used as configured in code
  logging:
    level: "default:info"

  # monitoring port used by mixer, pilot, galley
  monitoringPort: 15014

  k8sIngress:
    enabled: true
    # Gateway used for k8s Ingress resources. By default it is
    # using ‘istio:ingressgateway‘ that will be installed by setting
    # ‘gateways.enabled‘ and ‘gateways.istio-ingressgateway.enabled‘
    # flags to true.
    gatewayName: ingressgateway
    # enableHttps will add port 443 on the ingress.
    # It REQUIRES that the certificates are installed  in the
    # expected secrets - enabling this option without certificates
    # will result in LDS rejection and the ingress will not work.
    enableHttps: false

  proxy:
    image: proxyv2
    # 修改成自己配置k8s 域名
    # cluster domain. Default value is "cluster.local".
    clusterDomain: "cluster.local"

    # Resources for the sidecar.
    resources:
      requests:
        cpu: 100m
        memory: 128Mi
      limits:
        cpu: 2000m
        memory: 1024Mi

    # Controls number of Proxy worker threads.
    # If set to 0 (default), then start worker thread for each CPU thread/core.
    concurrency: 2

    # Configures the access log for each sidecar.
    # Options:
    #   "" - disables access log
    #   "/dev/stdout" - enables access log
    accessLogFile: "/dev/stdout"

    # Configure how and what fields are displayed in sidecar access log. Setting to
    # empty string will result in default log format
    accessLogFormat: ""

    # Configure the access log for sidecar to JSON or TEXT.
    accessLogEncoding: TEXT

    # Log level for proxy, applies to gateways and sidecars.  If left empty, "warning" is used.
    # Expected values are: trace|debug|info|warning|error|critical|off
    logLevel: "info"

    # Per Component log level for proxy, applies to gateways and sidecars. If a component level is
    # not set, then the global "logLevel" will be used. If left empty, "misc:error" is used.
    componentLogLevel: ""

    # Configure the DNS refresh rate for Envoy cluster of type STRICT_DNS
    # This must be given it terms of seconds. For example, 300s is valid but 5m is invalid.
    dnsRefreshRate: 300s

    #If set to true, istio-proxy container will have privileged securityContext
    privileged: false

    # If set, newly injected sidecars will have core dumps enabled.
    enableCoreDump: false

    # Default port for Pilot agent health checks. A value of 0 will disable health checking.
    statusPort: 15020

    # The initial delay for readiness probes in seconds.
    readinessInitialDelaySeconds: 1

    # The period between readiness probes.
    readinessPeriodSeconds: 2

    # The number of successive failed probes before indicating readiness failure.
    readinessFailureThreshold: 30

    # istio egress capture whitelist
    # https://istio.io/docs/tasks/traffic-management/egress.html#calling-external-services-directly
    # example: includeIPRanges: "172.30.0.0/16,172.20.0.0/16"
    # would only capture egress traffic on those two IP Ranges, all other outbound traffic would
    # be allowed by the sidecar
    includeIPRanges: "*"
    excludeIPRanges: ""
    excludeOutboundPorts: ""

    # pod internal interfaces
    kubevirtInterfaces: ""

    # istio ingress capture whitelist
    # examples:
    #     Redirect no inbound traffic to Envoy:    --includeInboundPorts=""
    #     Redirect all inbound traffic to Envoy:   --includeInboundPorts="*"
    #     Redirect only selected ports:            --includeInboundPorts="80,8080"
    includeInboundPorts: "*"
    excludeInboundPorts: ""

    # This controls the ‘policy‘ in the sidecar injector.
    autoInject: enabled

    # Sets the destination Statsd in envoy (the value of the "--statsdUdpAddress" proxy argument
    # would be <host>:<port>).
    # Disabled by default.
    # The istio-statsd-prom-bridge is deprecated and should not be used moving forward.
    envoyStatsd:
      # If enabled is set to true, host and port must also be provided. Istio no longer provides a statsd collector.
      enabled: false
      host: # example: statsd-svc.istio-system
      port: # example: 9125

    # Sets the Envoy Metrics Service address, used to push Envoy metrics to an external collector
    # via the Metrics Service gRPC API. This contains detailed stats information emitted directly
    # by Envoy and should not be confused with the the Istio telemetry. The Envoy stats are also
    # available to scrape via the Envoy admin port at either /stats or /stats/prometheus.
    #
    # See https://www.envoyproxy.io/docs/envoy/latest/api-v2/config/metrics/v2/metrics_service.proto
    # for details about Envoy‘s Metrics Service API. 
    #
    # Disabled by default.
    envoyMetricsService:
      enabled: false
      host: # example: metrics-service.istio-system
      port: # example: 15000

    # Specify which tracer to use. One of: lightstep, zipkin, datadog
    tracer: "zipkin"

  proxy_init:
    # Base name for the proxy_init container, used to configure iptables.
    image: proxy_init

  # imagePullPolicy is applied to istio control plane components.
  # local tests require IfNotPresent, to avoid uploading to dockerhub.
  # TODO: Switch to Always as default, and override in the local tests.
  imagePullPolicy: IfNotPresent

  # controlPlaneSecurityEnabled enabled. Will result in delays starting the pods while secrets are
  # propagated, not recommended for tests.
  controlPlaneSecurityEnabled: false

  # disablePolicyChecks disables mixer policy checks.
  # if mixer.policy.enabled==true then disablePolicyChecks has affect.
  # Will set the value with same name in istio config map - pilot needs to be restarted to take effect.
  disablePolicyChecks: false

  # policyCheckFailOpen allows traffic in cases when the mixer policy service cannot be reached.
  # Default is false which means the traffic is denied when the client is unable to connect to Mixer.
  policyCheckFailOpen: false

  # EnableTracing sets the value with same name in istio config map, requires pilot restart to take effect.
  enableTracing: true

  # Configuration for each of the supported tracers
  tracer:
    # Configuration for envoy to send trace data to LightStep.
    # Disabled by default.
    # address: the <host>:<port> of the satellite pool
    # accessToken: required for sending data to the pool
    # secure: specifies whether data should be sent with TLS
    # cacertPath: the path to the file containing the cacert to use when verifying TLS. If secure is true, this is
    #   required. If a value is specified then a secret called "lightstep.cacert" must be created in the destination
    #   namespace with the key matching the base of the provided cacertPath and the value being the cacert itself.
    #
    lightstep:
      address: ""                # example: lightstep-satellite:443
      accessToken: ""            # example: abcdefg1234567
      secure: true               # example: true|false
      cacertPath: ""             # example: /etc/lightstep/cacert.pem
    zipkin:
      # Host:Port for reporting trace data in zipkin format. If not specified, will default to
      # zipkin service (port 9411) in the same namespace as the other istio components.
      address: ""
    datadog:
      # Host:Port for submitting traces to the Datadog agent.
      address: "$(HOST_IP):8126"

  # Default mtls policy. If true, mtls between services will be enabled by default.
  mtls:
    # Default setting for service-to-service mtls. Can be set explicitly using
    # destination rules or service annotations.
    enabled: false

  # ImagePullSecrets for all ServiceAccount, list of secrets in the same namespace
  # to use for pulling any images in pods that reference this ServiceAccount.
  # For components that don‘t use ServiceAccounts (i.e. grafana, servicegraph, tracing)
  # ImagePullSecrets will be added to the corresponding Deployment(StatefulSet) objects.
  # Must be set for any cluster configured with private docker registry.
  imagePullSecrets:
    # - private-registry-key

  # Specify pod scheduling arch(amd64, ppc64le, s390x) and weight as follows:
  #   0 - Never scheduled
  #   1 - Least preferred
  #   2 - No preference
  #   3 - Most preferred
  arch:
    amd64: 2
    s390x: 2
    ppc64le: 2

  # Whether to restrict the applications namespace the controller manages;
  # If not set, controller watches all namespaces
  oneNamespace: false

  # Default node selector to be applied to all deployments so that all pods can be
  # constrained to run a particular nodes. Each component can overwrite these default
  # values by adding its node selector block in the relevant section below and setting
  # the desired values.
  defaultNodeSelector: {}

  # Default node tolerations to be applied to all deployments so that all pods can be
  # scheduled to a particular nodes with matching taints. Each component can overwrite
  # these default values by adding its tolerations block in the relevant section below
  # and setting the desired values.
  # Configure this field in case that all pods of Istio control plane are expected to
  # be scheduled to particular nodes with specified taints.
  defaultTolerations: []

  # Whether to perform server-side validation of configuration.
  configValidation: true

  # Custom DNS config for the pod to resolve names of services in other
  # clusters. Use this to add additional search domains, and other settings.
  # see
  # https://kubernetes.io/docs/concepts/services-networking/dns-pod-service/#dns-config
  # This does not apply to gateway pods as they typically need a different
  # set of DNS settings than the normal application pods (e.g., in
  # multicluster scenarios).
  # NOTE: If using templates, follow the pattern in the commented example below.
  #podDNSSearchNamespaces:
  #- global
  #- "[[ valueOrDefault .DeploymentMeta.Namespace \"default\" ]].global"

  # If set to true, the pilot and citadel mtls will be exposed on the
  # ingress gateway
  meshExpansion:
    enabled: false
    # If set to true, the pilot and citadel mtls and the plain text pilot ports
    # will be exposed on an internal gateway
    useILB: false

  multiCluster:
    # Set to true to connect two kubernetes clusters via their respective
    # ingressgateway services when pods in each cluster cannot directly
    # talk to one another. All clusters should be using Istio mTLS and must
    # have a shared root CA for this model to work.
    enabled: false

  # A minimal set of requested resources to applied to all deployments so that
  # Horizontal Pod Autoscaler will be able to function (if set).
  # Each component can overwrite these default values by adding its own resources
  # block in the relevant section below and setting the desired resources values.
  defaultResources:
    requests:
      cpu: 10m
    #   memory: 128Mi
    # limits:
    #   cpu: 100m
    #   memory: 128Mi

  # enable pod distruption budget for the control plane, which is used to
  # ensure Istio control plane components are gradually upgraded or recovered.
  defaultPodDisruptionBudget:
    enabled: true
    # The values aren‘t mutable due to a current PodDisruptionBudget limitation
    # minAvailable: 1

  # Kubernetes >=v1.11.0 will create two PriorityClass, including system-cluster-critical and
  # system-node-critical, it is better to configure this in order to make sure your Istio pods
  # will not be killed because of low priority class.
  # Refer to https://kubernetes.io/docs/concepts/configuration/pod-priority-preemption/#priorityclass
  # for more detail.
  priorityClassName: ""

  # Use the Mesh Control Protocol (MCP) for configuring Mixer and
  # Pilot. Requires galley (`--set galley.enabled=true`).
  useMCP: true

  # The trust domain corresponds to the trust root of a system
  # Refer to https://github.com/spiffe/spiffe/blob/master/standards/SPIFFE-ID.md#21-trust-domain
  # Indicate the domain used in SPIFFE identity URL
  # The default depends on the environment.
  #   kubernetes: cluster.local
  #   else:  default dns domain
  trustDomain: ""

  # Set the default behavior of the sidecar for handling outbound traffic from the application:
  # ALLOW_ANY - outbound traffic to unknown destinations will be allowed, in case there are no
  #   services or ServiceEntries for the destination port
  # REGISTRY_ONLY - restrict outbound traffic to services defined in the service registry as well
  #   as those defined through ServiceEntries
  # ALLOW_ANY is the default in 1.1.  This means each pod will be able to make outbound requests 
  # to services outside of the mesh without any ServiceEntry.
  # REGISTRY_ONLY was the default in 1.0.  If this behavior is desired, set the value below to REGISTRY_ONLY.
  outboundTrafficPolicy:
    mode: ALLOW_ANY

  # The namespace where globally shared configurations should be present.
  # DestinationRules that apply to the entire mesh (e.g., enabling mTLS),
  # default Sidecar configs, etc. should be added to this namespace.
  # configRootNamespace: istio-config

  # set the default set of namespaces to which services, service entries, virtual services, destination
  # rules should be exported to. Currently only one value can be provided in this list. This value
  # should be one of the following two options:
  # * implies these objects are visible to all namespaces, enabling any sidecar to talk to any other sidecar.
  # . implies these objects are visible to only to sidecars in the same namespace, or if imported as a Sidecar.egress.host  
  #defaultConfigVisibilitySettings:
  #- ‘*‘

  sds:
    # SDS enabled. IF set to true, mTLS certificates for the sidecars will be
    # distributed through the SecretDiscoveryService instead of using K8S secrets to mount the certificates.
    enabled: false
    udsPath: ""
    useTrustworthyJwt: false
    useNormalJwt: false

  # Configure the mesh networks to be used by the Split Horizon EDS.
  #
  # The following example defines two networks with different endpoints association methods.
  # For `network1` all endpoints that their IP belongs to the provided CIDR range will be
  # mapped to network1. The gateway for this network example is specified by its public IP
  # address and port.
  # The second network, `network2`, in this example is defined differently with all endpoints
  # retrieved through the specified Multi-Cluster registry being mapped to network2. The
  # gateway is also defined differently with the name of the gateway service on the remote
  # cluster. The public IP for the gateway will be determined from that remote service (only
  # LoadBalancer gateway service type is currently supported, for a NodePort type gateway service,
  # it still need to be configured manually).
  #
  # meshNetworks:
  #   network1:
  #     endpoints:
  #     - fromCidr: "192.168.0.1/24"
  #     gateways:
  #     - address: 1.1.1.1
  #       port: 80
  #   network2:
  #     endpoints:
  #     - fromRegistry: reg1
  #     gateways:
  #     - registryServiceName: istio-ingressgateway.istio-system.svc.cluster.local
  #       port: 443
  #
  meshNetworks: {}

  # Specifies the global locality load balancing settings.
  # Locality-weighted load balancing allows administrators to control the distribution of traffic to
  # endpoints based on the localities of where the traffic originates and where it will terminate.
  # Please set either failover or distribute configuration but not both.
  #
  # localityLbSetting:
  #   distribute:
  #   - from: "us-central1/*"
  #     to:
  #       "us-central1/*": 80
  #       "us-central2/*": 20
  #
  # localityLbSetting:
  #   failover:
  #   - from: us-east
  #     to: eu-west
  #   - from: us-west
  #     to: us-east
  localityLbSetting: {}

  # Specifies whether helm test is enabled or not.
  # This field is set to false by default, so ‘helm template ...‘
  # will ignore the helm test yaml files when generating the template
  enableHelmTest: false
# 子模块的values 配置修改
# gateways 修改
# 删除NodePort  使用ClusterIP 如果gateways 以daemonset 方式部署最好使用hostNetwork: true 这样TCP 代理可以直接hostip 访问代理端口 代替Ingress直接对外访问
cd charts/gateways
vi values.yaml
#
# Gateways Configuration
# By default (if enabled) a pair of Ingress and Egress Gateways will be created for the mesh.
# You can add more gateways in addition to the defaults but make sure those are uniquely named
# and that NodePorts are not conflicting.
# Disable specifc gateway by setting the `enabled` to false.
#
enabled: true

istio-ingressgateway:
  enabled: true
  #
  # Secret Discovery Service (SDS) configuration for ingress gateway.
  #
  sds:
    # If true, ingress gateway fetches credentials from SDS server to handle TLS connections.
    enabled: false
    # SDS server that watches kubernetes secrets and provisions credentials to ingress gateway.
    # This server runs in the same pod as ingress gateway.
    image: node-agent-k8s
    resources:
      requests:
        cpu: 100m
        memory: 128Mi
      limits:
        cpu: 2000m
        memory: 1024Mi

  labels:
    app: istio-ingressgateway
    istio: ingressgateway
  autoscaleEnabled: true
  autoscaleMin: 1
  autoscaleMax: 5
  # specify replicaCount when autoscaleEnabled: false
  # replicaCount: 1
  resources:
    requests:
      cpu: 100m
      memory: 128Mi
    limits:
      cpu: 2000m
      memory: 1024Mi
  cpu:
    targetAverageUtilization: 80
  loadBalancerIP: ""
  loadBalancerSourceRanges: []
  externalIPs: []
 # 请更具自己部署的ingress 服务修改如果直接使用ingressgateway 作为ingress可以删除这行配置
  serviceAnnotations: {kubernetes.io/ingress.class: traefik,traefik.ingress.kubernetes.io/affinity: "true",traefik.ingress.kubernetes.io/load-balancer-method: drr}
 #serviceAnnotations: {}
  podAnnotations: {}
  type: ClusterIP #change to NodePort, ClusterIP or LoadBalancer if need be
  #externalTrafficPolicy: Local #change to Local to preserve source IP or Cluster for default behaviour or leave commented out
  ports:
    ## You can add custom gateway ports
    # Note that AWS ELB will by default perform health checks on the first port
    # on this list. Setting this to the health check port will ensure that health
    # checks always work. https://github.com/istio/istio/issues/12503
  - port: 15020
    targetPort: 15020
    name: status-port
  - port: 80
    targetPort: 80
    name: http2
  - port: 443
    name: https
  # Example of a port to add. Remove if not needed
  - port: 31400
    name: tcp
  ### PORTS FOR UI/metrics #####
  ## Disable if not needed
  - port: 15029
    targetPort: 15029
    name: https-kiali
  - port: 15030
    targetPort: 15030
    name: https-prometheus
  - port: 15031
    targetPort: 15031
    name: https-grafana
  - port: 15032
    targetPort: 15032
    name: https-tracing
    # This is the port where sni routing happens
  - port: 15443
    targetPort: 15443
    name: tls
  #### MESH EXPANSION PORTS  ########
  # Pilot and Citadel MTLS ports are enabled in gateway - but will only redirect
  # to pilot/citadel if global.meshExpansion settings are enabled.
  # Delete these ports if mesh expansion is not enabled, to avoid
  # exposing unnecessary ports on the web.
  # You can remove these ports if you are not using mesh expansion
  meshExpansionPorts:
  - port: 15011
    targetPort: 15011
    name: tcp-pilot-grpc-tls
  - port: 15004
    targetPort: 15004
    name: tcp-mixer-grpc-tls
  - port: 8060
    targetPort: 8060
    name: tcp-citadel-grpc-tls
  - port: 853
    targetPort: 853
    name: tcp-dns-tls
  ####### end MESH EXPANSION PORTS ######
  ##############
  secretVolumes:
  - name: ingressgateway-certs
    secretName: istio-ingressgateway-certs
    mountPath: /etc/istio/ingressgateway-certs
  - name: ingressgateway-ca-certs
    secretName: istio-ingressgateway-ca-certs
    mountPath: /etc/istio/ingressgateway-ca-certs
  ### Advanced options ############

  # Ports to explicitly check for readiness. If configured, the readiness check will expect a
  # listener on these ports. A comma separated list is expected, such as "80,443".
  #
  # Warning: If you do not have a gateway configured for the ports provided, this check will always
  # fail. This is intended for use cases where you always expect to have a listener on the port,
  # such as 80 or 443 in typical setups.
  applicationPorts: ""

  env:
    # A gateway with this mode ensures that pilot generates an additional
    # set of clusters for internal services but without Istio mTLS, to
    # enable cross cluster routing.
    ISTIO_META_ROUTER_MODE: "sni-dnat"
  nodeSelector: {}
  tolerations: []

  # Specify the pod anti-affinity that allows you to constrain which nodes
  # your pod is eligible to be scheduled based on labels on pods that are
  # already running on the node rather than based on labels on nodes.
  # There are currently two types of anti-affinity:
  #    "requiredDuringSchedulingIgnoredDuringExecution"
  #    "preferredDuringSchedulingIgnoredDuringExecution"
  # which denote “hard” vs. “soft” requirements, you can define your values
  # in "podAntiAffinityLabelSelector" and "podAntiAffinityTermLabelSelector"
  # correspondingly.
  # For example:
  # podAntiAffinityLabelSelector:
  # - key: security
  #   operator: In
  #   values: S1,S2
  #   topologyKey: "kubernetes.io/hostname"
  # This pod anti-affinity rule says that the pod requires not to be scheduled
  # onto a node if that node is already running a pod with label having key
  # “security” and value “S1”.
  podAntiAffinityLabelSelector: []
  podAntiAffinityTermLabelSelector: []

istio-egressgateway:
  enabled: true
  labels:
    app: istio-egressgateway
    istio: egressgateway
  autoscaleEnabled: true
  autoscaleMin: 1
  autoscaleMax: 5
  # specify replicaCount when autoscaleEnabled: false
  # replicaCount: 1
  resources:
    requests:
      cpu: 100m
      memory: 128Mi
    limits:
      cpu: 2000m
      memory: 256Mi
  cpu:
    targetAverageUtilization: 80
  serviceAnnotations: {}
  podAnnotations: {}
  type: ClusterIP #change to NodePort or LoadBalancer if need be
  ports:
  - port: 80
    name: http2
  - port: 443
    name: https
    # This is the port where sni routing happens
  - port: 15443
    targetPort: 15443
    name: tls
  secretVolumes:
  - name: egressgateway-certs
    secretName: istio-egressgateway-certs
    mountPath: /etc/istio/egressgateway-certs
  - name: egressgateway-ca-certs
    secretName: istio-egressgateway-ca-certs
    mountPath: /etc/istio/egressgateway-ca-certs
  #### Advanced options ########
  env:
    # Set this to "external" if and only if you want the egress gateway to
    # act as a transparent SNI gateway that routes mTLS/TLS traffic to
    # external services defined using service entries, where the service
    # entry has resolution set to DNS, has one or more endpoints with
    # network field set to "external". By default its set to "" so that
    # the egress gateway sees the same set of endpoints as the sidecars
    # preserving backward compatibility
    # ISTIO_META_REQUESTED_NETWORK_VIEW: ""
    # A gateway with this mode ensures that pilot generates an additional
    # set of clusters for internal services but without Istio mTLS, to
    # enable cross cluster routing.
    ISTIO_META_ROUTER_MODE: "sni-dnat"
  nodeSelector: {}
  tolerations: []

  # Specify the pod anti-affinity that allows you to constrain which nodes
  # your pod is eligible to be scheduled based on labels on pods that are
  # already running on the node rather than based on labels on nodes.
  # There are currently two types of anti-affinity:
  #    "requiredDuringSchedulingIgnoredDuringExecution"
  #    "preferredDuringSchedulingIgnoredDuringExecution"
  # which denote “hard” vs. “soft” requirements, you can define your values
  # in "podAntiAffinityLabelSelector" and "podAntiAffinityTermLabelSelector"
  # correspondingly.
  # For example:
  # podAntiAffinityLabelSelector:
  # - key: security
  #   operator: In
  #   values: S1,S2
  #   topologyKey: "kubernetes.io/hostname"
  # This pod anti-affinity rule says that the pod requires not to be scheduled
  # onto a node if that node is already running a pod with label having key
  # “security” and value “S1”.
  podAntiAffinityLabelSelector: []
  podAntiAffinityTermLabelSelector: []

# Mesh ILB gateway creates a gateway of type InternalLoadBalancer,
# for mesh expansion. It exposes the mtls ports for Pilot,CA as well
# as non-mtls ports to support upgrades and gradual transition.
istio-ilbgateway:
  enabled: false
  labels:
    app: istio-ilbgateway
    istio: ilbgateway
  autoscaleEnabled: false
  autoscaleMin: 1
  autoscaleMax: 10
  # specify replicaCount when autoscaleEnabled: false
  # replicaCount: 1
  cpu:
    targetAverageUtilization: 80
  resources:
    requests:
      cpu: 800m
      memory: 512Mi
    #limits:
    #  cpu: 1800m
    #  memory: 256Mi
  loadBalancerIP: ""
  serviceAnnotations:
    cloud.google.com/load-balancer-type: "internal"
  podAnnotations: {}
  type: ClusterIP
  ports:
  ## You can add custom gateway ports - google ILB default quota is 5 ports,
  - port: 15011
    name: grpc-pilot-mtls
  # Insecure port - only for migration from 0.8. Will be removed in 1.1
  - port: 15010
    name: grpc-pilot
  - port: 8060
    targetPort: 8060
    name: tcp-citadel-grpc-tls
  # Port 5353 is forwarded to kube-dns
  - port: 5353
    name: tcp-dns
  secretVolumes:
  - name: ilbgateway-certs
    secretName: istio-ilbgateway-certs
    mountPath: /etc/istio/ilbgateway-certs
  - name: ilbgateway-ca-certs
    secretName: istio-ilbgateway-ca-certs
    mountPath: /etc/istio/ilbgateway-ca-certs
  nodeSelector: {}
  tolerations: []
# 修改kial
ingress:
  enabled: true
  ## Used to create an Ingress record.
  hosts:
    - kiali.xxxxx.com
  annotations:
    # kubernetes.io/ingress.class: nginx
    # kubernetes.io/tls-acme: "true"
  tls:
    # Secrets must be manually created in the namespace.
    # - secretName: kiali-tls
    #   hosts:
    #     - kiali.local
# 设置密码登陆
createDemoSecret: true
# tracing 修改
ingress:
  enabled: true
  # Used to create an Ingress record.
  hosts:
    # - tracing.xxxx.com
  annotations:
    # kubernetes.io/ingress.class: nginx
    # kubernetes.io/tls-acme: "true"
  tls:
    # Secrets must be manually created in the namespace.
    # - secretName: tracing-tls
    #   hosts:
    #     - tracing.local
    修改 mixer
    policy:
  # if policy is enabled, global.disablePolicyChecks has affect.
  enabled: true #  启用策略检查

修改gateways service配置

cd helm/istio/charts/gateways/templates
vi service.yaml
{{- range $key, $spec := .Values }}
{{- if ne $key "enabled" }}
{{- if $spec.enabled }}
apiVersion: v1
kind: Service
metadata:
  name: {{ $key }}
  namespace: {{ $spec.namespace | default $.Release.Namespace }}
  annotations:
    {{- range $key, $val := $spec.serviceAnnotations }}
    {{ $key }}: {{ $val | quote }}
    {{- end }}
  labels:
    chart: {{ template "gateway.chart" $ }}
    heritage: {{ $.Release.Service }}
    release: {{ $.Release.Name }}
    {{- range $key, $val := $spec.labels }}
    {{ $key }}: {{ $val }}
    {{- end }}
spec:
{{- if $spec.loadBalancerIP }}
  loadBalancerIP: "{{ $spec.loadBalancerIP }}"
{{- end }}
{{- if $spec.loadBalancerSourceRanges }}
  loadBalancerSourceRanges:
{{ toYaml $spec.loadBalancerSourceRanges | indent 4 }}
{{- end }}
{{- if $spec.externalTrafficPolicy }}
  externalTrafficPolicy: {{$spec.externalTrafficPolicy }}
{{- end }}
{{- if $spec.externalIPs }}
  externalIPs:
{{ toYaml $spec.externalIPs | indent 4 }}
{{- end }}
  type: {{ .type }}
  selector:
    release: {{ $.Release.Name }}
    {{- range $key, $val := $spec.labels }}
    {{ $key }}: {{ $val }}
    {{- end }}
        # 使用POD IP 直接对外服务器不生成clusterIP 不然前端在放一个代理tcp 方式每次修改service 就很不方便
  clusterIP: None
  ports:
    {{- range $key, $val := $spec.ports }}
    -
      {{- range $pkey, $pval := $val }}
      {{ $pkey}}: {{ $pval }}
      {{- end }}
    {{- end }}
    {{- if $.Values.global.meshExpansion.enabled }}
    {{- range $key, $val := $spec.meshExpansionPorts }}
    -
      {{- range $pkey, $pval := $val }}
      {{ $pkey}}: {{ $pval }}
      {{- end }}
    {{- end }}
    {{- end }}
---
{{- end }}
{{- end }}
{{- end }}

修改istio-cni values

cd istio-1.2.5/install/kubernetes/helm/istio-cni
hub: docker.io/istio
tag: 1.2.5
pullPolicy: Always

logLevel: info

# Configuration file to insert istio-cni plugin configuration
# by default this will be the first file found in the cni-conf-dir
# Example
# cniConfFileName: 10-calico.conflist

# CNI bin and conf dir override settings
# defaults:
# cni 二进制目录 宿主机
cniBinDir: /apps/cni/bin
# cni 配置文件地址宿主机
cniConfDir: /etc/cni/net.d
# 下面修改要排除的命名空间
excludeNamespaces:
  - istio-system
  - monitoring
  - clusterstorage
  - consul
  - kubernetes-dashboard
  - kube-system
# 修改istio-cni.yaml 添加tolerations # 如果没做tolerations 可以bu不用修改
#101 行添加内容
        - effect: NoSchedule
          key: node-role.kubernetes.io/ingress
          operator: Equal

部署 istio

# 不开启certmanager 
cd istio-1.2.5/
# 创建命名空间
kubectl apply -f install/kubernetes/namespace.yaml
# 部署crd
helm install install/kubernetes/helm/istio-init --name-template istio-init --namespace istio-system
# 验证crd 是否部署完成
 kubectl get crds | grep ‘istio.io\|certmanager.k8s.io‘ | wc -l
# [root@]~]# kubectl get crds | grep ‘istio.io\|certmanager.k8s.io‘ | wc -l
# 23
# 部署istio
helm install install/kubernetes/helm/istio --name-template istio --namespace istio-system   --set istio_cni.enabled=true   --set istio-cni.cniBinDir=/apps/cni/bin   --set istio-cni.excludeNamespaces={"istio-system,monitoring,clusterstorage,consul,kubernetes-dashboard,kube-system"} 
# 这几个参数不能省略 这个configmap istio-sidecar-injector 会用到
# 等待部署完成
# 查看部署状态
[root@]~]#kubectl get svc -n istio-system
NAME                     TYPE        CLUSTER-IP      EXTERNAL-IP   PORT(S)                                                                                AGE
grafana                  ClusterIP   10.64.194.111   <none>        3000/TCP                                                                               20h
istio-citadel            ClusterIP   10.64.247.166   <none>        8060/TCP,15014/TCP                                                                     20h
istio-egressgateway      ClusterIP   None            <none>        80/TCP,443/TCP,15443/TCP                                                               20h
istio-galley             ClusterIP   10.64.180.50    <none>        443/TCP,15014/TCP,9901/TCP                                                             20h
istio-ingressgateway     ClusterIP   None            <none>        15020/TCP,80/TCP,443/TCP,31400/TCP,15029/TCP,15030/TCP,15031/TCP,15032/TCP,15443/TCP   20h
istio-pilot              ClusterIP   10.64.71.214    <none>        15010/TCP,15011/TCP,8080/TCP,15014/TCP                                                 20h
istio-policy             ClusterIP   10.64.235.77    <none>        9091/TCP,15004/TCP,15014/TCP                                                           20h
istio-sidecar-injector   ClusterIP   10.64.127.238   <none>        443/TCP                                                                                20h
istio-telemetry          ClusterIP   10.64.218.132   <none>        9091/TCP,15004/TCP,15014/TCP,42422/TCP                                                 20h
jaeger-agent             ClusterIP   None            <none>        5775/UDP,6831/UDP,6832/UDP                                                             20h
jaeger-collector         ClusterIP   10.64.176.255   <none>        14267/TCP,14268/TCP                                                                    20h
jaeger-query             ClusterIP   10.64.25.179    <none>        16686/TCP                                                                              20h
kiali                    ClusterIP   10.64.19.25     <none>        20001/TCP                                                                              20h
prometheus               ClusterIP   10.64.81.141    <none>        9090/TCP                                                                               20h
tracing                  ClusterIP   10.64.196.70    <none>        80/TCP                                                                                 20h
zipkin                   ClusterIP   10.64.2.197     <none>        9411/TCP                                                                               20h
# 确保部署了相应的 Kubernetes pod 并且 STATUS 是 Running的:
[root@]~]#kubectl get pods -n istio-system
NAME                                      READY   STATUS      RESTARTS   AGE
grafana-846c699c5c-xdm42                  1/1     Running     0          20h
istio-citadel-68776b8c6f-k6dxd            1/1     Running     0          20h
istio-cni-node-4d2f2                      1/1     Running     0          26h
istio-cni-node-68jzs                      1/1     Running     0          26h
istio-cni-node-lptml                      1/1     Running     0          26h
istio-cni-node-p74bp                      1/1     Running     0          26h
istio-cni-node-p7v2j                      1/1     Running     0          26h
istio-cni-node-z6mfn                      1/1     Running     0          26h
istio-cni-node-zdzf2                      1/1     Running     0          26h
istio-egressgateway-b488867bf-dzd6l       1/1     Running     0          20h
istio-galley-9795c8ff8-62cpz              1/1     Running     0          20h
istio-ingressgateway-54cf955579-227qt     1/1     Running     0          20h
istio-init-crd-10-bmndt                   0/1     Completed   0          26h
istio-init-crd-11-rv85n                   0/1     Completed   0          26h
istio-init-crd-12-w77hp                   0/1     Completed   0          26h
istio-pilot-5f67fbd648-jr5wl              2/2     Running     0          20h
istio-policy-65fb44b85b-z2j5q             2/2     Running     2          20h
istio-sidecar-injector-55ff84f69f-kqxl5   1/1     Running     0          20h
istio-telemetry-799c785c8d-nzlf8          2/2     Running     3          20h
istio-tracing-6748c7c4f5-nb94f            1/1     Running     0          20h
kiali-56b5466944-d7rrp                    1/1     Running     0          20h
prometheus-5b68448dc9-92cg2               1/1     Running     0          20h
# 部署istio-cni
helm install install/kubernetes/helm/istio-cni --name-template istio-cni --namespace istio-system
# 等待部署正常
自动注入的话给namespace 打标签
kubectl label namespace default istio-injection=enabled
kubectl get namespace -L istio-injection
 # 测试时只要打标签就不会部署pod 所以只能删除标签
 kubectl label namespace default istio-injection-
 # 启用策略检查
 kubectl -n istio-system get cm istio -o jsonpath="{@.data.mesh}" | grep disablePolicyChecks
 #返回:disablePolicyChecks: true 可以修改 disablePolicyChecks: false 不修改
 kubectl -n istio-system get cm istio -o jsonpath="{@.data.mesh}" | sed -e "s/disablePolicyChecks: true/disablePolicyChecks: false/" > /tmp/mesh.yaml
 kubectl -n istio-system create cm istio -o yaml --dry-run --from-file=mesh=/tmp/mesh.yaml | kubectl replace -f -
 rm -f /tmp/mesh.yaml
 kubectl -n istio-system get cm istio -o jsonpath="{@.data.mesh}" | grep disablePolicyChecks

测试istio 是否部署正常

以nginx 为例
修改 nginx-deployment.yaml
# 添加istio: ingressgateway
apiVersion: apps/v1
kind: Deployment
metadata:
  name: nginx
spec:
  replicas: 2
  selector:
    matchLabels:
      k8s-app: nginx
  template:
    metadata:
      labels:
        k8s-app: nginx
        istio: ingressgateway
    spec:
      containers:
        - name: nginx
 ##############################
 修改Service
---
kind: Service
apiVersion: v1
metadata:
  labels:
    k8s-app: nginx
    istio: ingressgateway
  name: nginx
  annotations:
    kubernetes.io/ingress.class: traefik
    traefik.ingress.kubernetes.io/affinity: "true"
    traefik.ingress.kubernetes.io/load-balancer-method: drr
    "consul.hashicorp.com/service-port": "http-metrics"
spec:
  sessionAffinity: ClientIP
  sessionAffinityConfig:
    clientIP:
      timeoutSeconds: 10800
  selector:
    k8s-app: nginx
    istio: ingressgateway
  ports:
    - protocol: TCP
      port: 80
      name: web
    - protocol: TCP
      port: 8080
      name: vts
    - protocol: TCP
      port: 9913
      name: http-metrics
  type: ClusterIP
######################
istioctl kube-inject -f nginx-deployment.yaml  --injectConfigMapName istio-sidecar-injector | kubectl apply -f - -n default
或者生成文件
istioctl kube-inject -f nginx-deployment.yaml -o deployment-injected.yaml --injectConfigMapName istio-sidecar-injector
kubectl apply -f deployment-injected.yaml -n default
# 查看是否部署正常
[root@]~]#kubectl get pod -n default | grep nginx
nginx-6db8f49c8c-8m2zh   3/3     Running   0          25h
nginx-6db8f49c8c-d4kws   3/3     Running   0          25h

技术图片

# 删除 旧ingress
kubectl delete -f nginx-ingress.yaml
创建 gateway 服务
vi nginx-web-gateway.yaml
apiVersion: networking.istio.io/v1alpha3
kind: Gateway
metadata:
  name: nginx-web-gateway
  namespace: default
spec:
  selector:
    istio: ingressgateway # use Istio default gateway implementation
  servers:
  - port:
      number: 80
      name: web
      protocol: HTTP
    hosts:
    - "nginx.xxxx.com"
---
apiVersion: networking.istio.io/v1alpha3
kind: VirtualService
metadata:
  name: nginx-web
  namespace: default
spec:
  hosts:
  - "nginx.xxxx.com"
  gateways:
  - nginx-web-gateway
  http:
  - match:
    - port: 80
    route:
    - destination:
        host: nginx
      weight: 100
---
# 后端转发负载均衡方式
# 参考https://istio.io/zh/docs/reference/config/istio.networking.v1alpha3/
apiVersion: networking.istio.io/v1alpha3
kind: DestinationRule
metadata:
   name: nginx-ratings
   namespace: default
spec:
   host: nginx
   trafficPolicy:
      loadBalancer:
       consistentHash:
         httpCookie:
           name: user
           ttl: 0s
# 执行
kubectl apply -f nginx-web-gateway.yaml
# 查看是否能对外访问
[root@]~]#kubectl get pod -o wide -n istio-system | grep istio-ingressgateway
istio-ingressgateway-54cf955579-227qt     1/1     Running     0          21h   10.65.5.52      node03       <none>           <none>
# host 绑定IP
10.65.5.52 nginx.xxxx.com
# 查看浏览器是否打开

技术图片

# 能正常打开
#这个服务还不能对外提供访问修改nginx Ingress 使服务能对外提供服务
# 修改Ingress
vi nginx-ingress.yaml
apiVersion: extensions/v1beta1
kind: Ingress
metadata:
  name: nginx
  namespace: istio-system #  istio 网关所在的命名空间
  annotations:
    kubernetes.io/ingress.class: traefik
    traefik.frontend.rule.type: PathPrefixStrip
spec:
  rules:
  - host: nginx.xxxx.com
    http:
      paths:
        - path: /
          backend:
            serviceName: istio-ingressgateway # 现在服务变成 istio 网关服务
            servicePort: 80
# 删除刚刚绑定host 直接dns 解析访问

技术图片

已经正常走Ingress
nginx 日志
 192.168.20.94 -  [10/Sep/2019:16:02:20 +0800] nginx.xxxx.com "GET / HTTP/1.1" 304 0 "" "Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:69.0) Gecko/20100101 Firefox/69.0" "192.168.20.94,192.168.30.35" 127.0.0.1 ups_add:  ups_resp_time:  request_time: 0.000  ups_status:  request_body:  upstream_response_length [] 
# istio-ingressgateway 服务日志
 [2019-09-11T09:30:30.820Z] "GET / HTTP/1.1" 304 - "-" "-" 0 0 0 0 "192.168.20.94,192.168.30.35" "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/76.0.3809.132 Safari/537.36" "34555d82-f202-4ae0-8896-f87105c562e1" "nginx.xxxx.com" "10.65.5.30:80" outbound|80||nginx.default.svc.xxxx.local - 10.65.5.52:80 192.168.30.35:46178 -

 istio-ingressgateway 可以配置多个域名
 apiVersion: networking.istio.io/v1alpha3
kind: Gateway
metadata:
  name: zentao-web-gateway
  namespace: zentao
spec:
  selector:
    istio: ingressgateway # use Istio default gateway implementation
  servers:
  - port:
      number: 80
      name: http
      protocol: HTTP
    hosts:
    - "zentao.xxxx.com"
---
apiVersion: networking.istio.io/v1alpha3
kind: VirtualService
metadata:
  name: zentao-web
  namespace: zentao
spec:
  hosts:
  - "zentao.xxxx.com"
  gateways:
  - zentao-web-gateway
  http:
  - match:
    - port: 80
    route:
    - destination:
        host: zentao
      weight: 100
---
apiVersion: networking.istio.io/v1alpha3
kind: DestinationRule
metadata:
   name: zentao-ratings
   namespace: zentao
spec:
   host: zentao
   trafficPolicy:
      loadBalancer:
       consistentHash:
         httpCookie:
           name: user
           ttl: 0s
# Ingress 
apiVersion: extensions/v1beta1
kind: Ingress
metadata:
  name: zentao
  namespace: istio-system
  annotations:
    kubernetes.io/ingress.class: traefik
    traefik.frontend.rule.type: PathPrefixStrip
spec:
  rules:
  - host: zentao.xxxx.com
    http:
      paths:
        - path: /
          backend:
            serviceName: istio-ingressgateway
            servicePort: 80
# 非80 端口提供服务
#代理nginx metrics 监控
apiVersion: networking.istio.io/v1alpha3
kind: Gateway
metadata:
  name: metrics-gateway
  namespace: default
spec:
  selector:
    istio: ingressgateway # use Istio default gateway implementation
  servers:
  - port:
      number: 30080
      name: http-metrics
      protocol: HTTP
    hosts:
    - "*"
---
apiVersion: networking.istio.io/v1alpha3
kind: VirtualService
metadata:
  name: metrics-tcp
  namespace: default
spec:
  hosts:
  - "*"
  gateways:
  - metrics-gateway
  http:
  - match:
    - port: 30080
    route:
    - destination:
        host: nginx
        port:
          number: 9913
      weight: 100
# 查看gateway pod 30080 端口是否监听
[root@]~]#kubectl get pod -o wide -n istio-system | grep istio-ingressgateway
istio-ingressgateway-54cf955579-227qt     1/1     Running     0          21h   10.65.5.52      node03       <none>           <none>
# 进入POD
[root@]~]#kubectl exec -ti istio-ingressgateway-54cf955579-227qt /bin/bash -n istio-system
root@istio-ingressgateway-54cf955579-227qt:/# netstat -tnlp
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name
tcp        0      0 127.0.0.1:15000         0.0.0.0:*               LISTEN      98/envoy
tcp        0      0 0.0.0.0:30080           0.0.0.0:*               LISTEN      98/envoy
tcp        0      0 0.0.0.0:80              0.0.0.0:*               LISTEN      98/envoy
tcp        0      0 0.0.0.0:15090           0.0.0.0:*               LISTEN      98/envoy
tcp6       0      0 :::15020                :::*                    LISTEN      1/pilot-agent
#30080 端口已经监听
ip:端口访问
http://10.65.5.52:30080/metrics

技术图片

能够正常访问
istio-ingressgateway 打印日志
[2019-09-11T09:43:42.947Z] "GET /favicon.ico HTTP/1.1" 200 - "-" "-" 0 152 1 1 "192.168.20.94" "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/76.0.3809.132 Safari/537.36" "1c2b2699-6167-4b9f-ba7a-4071216dc742" "10.65.5.52:30080" "10.65.6.216:9913" outbound|9913||nginx.default.svc.xxxx.local - 10.65.5.52:30080 192.168.20.94:63024 -
这样就能使用haproxy + dns 对外提供tcp 服务 如果使用ClusterIP 一定要修改istio-ingressgateway service 对外暴露IP
 以daemonset 方式部署最好使用hostNetwork: true 这样TCP 代理可以直接hostip 访问代理端口 代替Ingress直接对外访问
 # istio-1.2.5/samples 为示例 可以测试做金丝雀发布

清理 istio

helm uninstall istio --namespace istio-system
helm uninstall istio-init --namespace istio-system
helm uninstall istio-cni --namespace istio-system
kubectl delete ns istio-system

技术图片
技术图片

istio 1.2.5及istio-cni 部署

标签:cookie   path   nav   priority   sample   osc   expec   oci   -name   

原文地址:https://blog.51cto.com/juestnow/2437537

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!