centos7.2 kubeadm1.15.3部署k8s环境

标签：ror   create   log   linux   detail   warning   cgroup   dep   link   

2019.09.11 fb

环境准备

• 准备三个节点 一个master 两个node

  • 192.168.122.193 master
  • 192.168.122.194 node 01
  • 192.168.122.195 node02

• 修改主机名

  • hostname查看主机名
  • 修改 /etc/sysconfig/network
    • NETWORKING=yes
      HOSTNAME=主机名

• 配置DNS

  • 1 vi /etc/sysconfig/network-scripts/ifcfg-eth0
    添加
    NM_CONTROLLED=no
    重启网络服务
    systemctl restart network
    2.配置DNS
    修改NetworkManager.conf 配置文件
    
    vim /etc/NetworkManager/NetworkManager.conf
    在[main]中添加
    
    dns=no
    修改resolv.conf配置文件
    
    vim /etc/resolv.conf
    添加
    
    #主DNS服务器 阿里dns
    nameserver 223.5.5.5
    
    #备DNS服务器
    nameserver 114.114.114.114
    重启NetworkManager
    
    systemctl restart NetworkManager

• 配置阿里云yum源

  wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-7.repo

• 通过NTP完成各节点时间同步

  • 安装软件
    • yum install chrony
  • 同步时间
    • systemctl start chronyd
    • systemctl enable chronyd
  • 查看时间同步源
    • chronyc sources -v
      chronyc sourcestats -v

• 配置hosts 完成dns解析

  • cat /etc/hosts

    [root@master ~]# cat /etc/hosts
    127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
    ::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
    192.168.122.193 master
    192.168.122.194 node01
    192.168.122.195 node02
    [root@master ~]# 

• 关闭防火墙

  [root@master ~]# systemctl stop firewalld
  [root@master ~]# systemctl disable firewalld
  Removed symlink /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.
  Removed symlink /etc/systemd/system/basic.target.wants/firewalld.service.
  [root@master ~]# 

• 关闭selinux

  • 修改配置

    vi /etc/selinux/config 
    
        #SELINUX=enforcing
        SELINUX=disabled
        SELINUXTYPE=targeted

  • 重启

    reboot

  • 查看状态

    [root@master ~]# getenforce
    Disabled
    [root@master ~]# 

• 禁用swap

  • swapoff -a

  • 卸载swap分区

    sudo vim /etc/fstab
    注释掉 swap 这一行

  • reboot

• ssh互信

  ssh-keygen -t rsa
  cd /root/.ssh
  把各节点的 pub文件内容追加到 authorized_keys 文件中
  把 authorized_keys 文件分发到各个节点的 /root/.ssh 

安装Docker程序包

• 安装dockerce

  • 配置yum源

    cd /etc/yum.repos.d
    wget https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo

  • 安装dockerce

    yum install docker-ce -y

  • 为docker设置阿里云加速器

    点击容器镜像服务
    点击加速器
    
    参考 https://www.cnblogs.com/zhxshseu/p/5970a5a763c8fe2b01cd2eb63a8622b2.html

  • 修改 /usr/lib/systemd/system/docker.service

    [Service]
    Type=notify
    # the default is not to use systemd for cgroups because the delegate issues still
    # exists and systemd currently does not support the cgroup feature set required
    # for containers run by docker
    # Enviroment="HTTPS_PROXY=http://www.ik8s.io:10070"      <----新加的代理配置
    # Environment="NO_PROXY=127.0.0.0/8,192.168.122.0/24"    <----新加的 不代理
    ExecStart=/usr/bin/dockerd -H fd:// --containerd=/run/containerd/containerd.sock
    ExecStartPost=/usr/sbin/iptables -P FORWARD ACCEPT      <----新加的 防火墙策略

    vim /etc/sysctl.d/k8s.conf

    net.bridge.bridge-nf-call-ip6tables = 1
    net.bridge.bridge-nf-call-iptables = 1

    sysctl -p /etc/sysctl.d/k8s.conf

  • docker 设置开机自启动

    systemctl enable docker

安装kubeadm

• 配置yum源

  cd /etc/yum.repos.d
  vim kubernetes.repo 
  [kubernetes]
  name=Kubernetes Repository
  baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
  gpgcheck=1
  gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
    https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg

• 检查配置是否正确

  yum repolist 
  正确显示
  [root@master yum.repos.d]# yum repolist
  Loaded plugins: fastestmirror
  Loading mirror speeds from cached hostfile
   * base: mirrors.aliyun.com
   * extras: mirrors.aliyun.com
   * updates: mirrors.aliyun.com
  repo id                      repo name                                 status
  base/7/x86_64                CentOS-7 - Base - mirrors.aliyun.com      10,019
  docker-ce-stable/x86_64      Docker CE Stable - x86_64                 56
  extras/7/x86_64              CentOS-7 - Extras - mirrors.aliyun.com    435
  updates/7/x86_64             CentOS-7 - Updates - mirrors.aliyun.com   2,500

• 软件安装（master节点）

  yum install kubeadm kubectl kubelet

初始化集群

初始化master

swap启用情况处理的方法

vim /etc/sysconfig/kubelet

KUBELET_EXTRA_ARGS="--fail-swap-on=false"

安装master

• 查看初始化参数

  kubeadm config print init-defaults
  [root@master ~]# kubeadm config print init-defaults
    apiVersion: kubeadm.k8s.io/v1beta2
    bootstrapTokens:
  
  - groups:
    - system:bootstrappers:kubeadm:default-node-token
      token: abcdef.0123456789abcdef
      ttl: 24h0m0s
      usages:
    - signing
    - authentication
      kind: InitConfiguration
      localAPIEndpoint:
      advertiseAddress: 1.2.3.4
      bindPort: 6443
      nodeRegistration:
      criSocket: /var/run/dockershim.sock
      name: master
      taints:
    - effect: NoSchedule
      key: node-role.kubernetes.io/master
  
  ------
  
    apiServer:
      timeoutForControlPlane: 4m0s
    apiVersion: kubeadm.k8s.io/v1beta2
    certificatesDir: /etc/kubernetes/pki
    clusterName: kubernetes
    controllerManager: {}
    dns:
      type: CoreDNS
    etcd:
      local:
        dataDir: /var/lib/etcd
    imageRepository: k8s.gcr.io        <-- 默认使用的仓库 注意项！！！
    kind: ClusterConfiguration
    kubernetesVersion: v1.15.0         <-- 版本 注意项！！！
    networking:
      dnsDomain: cluster.local
      serviceSubnet: 10.96.0.0/12
    scheduler: {}
    [root@master ~]#

• 干跑测试

  kubeadm init --kubernetes-version="1.15.3" --pod-network-cidr="10.244.0.0/16" --dry-run

• 各节点提前下载镜像

查看镜像
[root@master fb]# kubeadm config images list
W0913 11:06:24.804608    6687 version.go:98] could not fetch a Kubernetes version from the internet: unable to get URL "https://dl.k8s.io/release/stable-1.txt": Get https://dl.k8s.io/release/stable-1.txt: net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers)
W0913 11:06:24.804748    6687 version.go:99] falling back to the local client version: v1.15.3
k8s.gcr.io/kube-apiserver:v1.15.3
k8s.gcr.io/kube-controller-manager:v1.15.3
k8s.gcr.io/kube-scheduler:v1.15.3
k8s.gcr.io/kube-proxy:v1.15.3
k8s.gcr.io/pause:3.1
k8s.gcr.io/etcd:3.3.10
k8s.gcr.io/coredns:1.3.1
[root@master fb]# 
[root@master fb]# 
[root@master fb]# 
[root@master fb]# 
[root@master fb]# 
[root@master fb]# 
[root@master fb]# 


[root@node-2 opt]# cat k8s-image-download.sh
#!/bin/bash
# liyongjian5179@163.com
# download k8s 1.15.3 images
# get image-list by 'kubeadm config images list --kubernetes-version=v1.15.3'
# gcr.azk8s.cn/google-containers == k8s.gcr.io

if [ $# -ne 1 ];then
    echo "please user in: ./`basename $0` KUBERNETES-VERSION"
    exit 1
fi
version=$1

images=`kubeadm config images list --kubernetes-version=${version} |awk -F'/' '{print $2}'`

for imageName in ${images[@]};do
    docker pull gcr.azk8s.cn/google-containers/$imageName
    docker tag  gcr.azk8s.cn/google-containers/$imageName k8s.gcr.io/$imageName
    docker rmi  gcr.azk8s.cn/google-containers/$imageName
done

[root@node-2 opt]#./k8s-image-download.sh 1.15.3
参考 https://www.cnblogs.com/liyongjian5179/p/11417794.html


下载完镜像查看镜像
[root@master fb]# docker images
REPOSITORY                           TAG                 IMAGE ID            CREATED             SIZE
k8s.gcr.io/kube-proxy                v1.15.3             232b5c793146        3 weeks ago         82.4MB
k8s.gcr.io/kube-apiserver            v1.15.3             5eb2d3fc7a44        3 weeks ago         207MB
k8s.gcr.io/kube-scheduler            v1.15.3             703f9c69a5d5        3 weeks ago         81.1MB
k8s.gcr.io/kube-controller-manager   v1.15.3             e77c31de5547        3 weeks ago         159MB
k8s.gcr.io/coredns                   1.3.1               eb516548c180        8 months ago        40.3MB
k8s.gcr.io/etcd                      3.3.10              2c4adeb21b4f        9 months ago        258MB
k8s.gcr.io/pause                     3.1                 da86e6ba6ca1        21 months ago       742kB
[root@master fb]# 

• 部署主节点

kubeadm init --kubernetes-version="1.15.3" --pod-network-cidr="10.244.0.0/16" 

• 部署完成

  Your Kubernetes control-plane has initialized successfully!
  
  To start using your cluster, you need to run the following as a regular user:
  
    mkdir -p $HOME/.kube
    sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
    sudo chown $(id -u):$(id -g) $HOME/.kube/config
  
  You should now deploy a pod network to the cluster.
  Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
    https://kubernetes.io/docs/concepts/cluster-administration/addons/
  
  Then you can join any number of worker nodes by running the following on each as root:
  
  kubeadm join 192.168.122.193:6443 --token hasvlr.9puhkyn3pzbhqfj7     --discovery-token-ca-cert-hash sha256:5d1d4cb9b84debc570757193298fd5c89ce9e0bbbdf9f397de81ce1d671db0bb 
  [root@master fb]# 

• 创建配置项

  cd
  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

• 安装flannel组件

  安装flannel组件前
  [root@master ~]# kubectl get nodes
  NAME     STATUS     ROLES    AGE    VERSION
  master   NotReady   master   5m1s   v1.15.3
  [root@master ~]#

  安装flannel组件
  kubectl apply -f https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml

  安装flannel完成后，节点状态变为Ready，节点状态正常了。
  [root@master ~]# kubectl get nodes
  NAME     STATUS   ROLES    AGE   VERSION
  master   Ready    master   13m   v1.15.3
  [root@master ~]# 

初始化node节点

• 安装软件

  yum install kubeadm kubectl

• 加入到集群中

  kubeadm join 192.168.122.193:6443 --token hasvlr.9puhkyn3pzbhqfj7     --discovery-token-ca-cert-hash sha256:5d1d4cb9b84debc570757193298fd5c89ce9e0bbbdf9f397de81ce1d671db0bb

  [root@node01 ~]# kubeadm join 192.168.122.193:6443 --token hasvlr.9puhkyn3pzbhqfj7 >     --discovery-token-ca-cert-hash sha256:5d1d4cb9b84debc570757193298fd5c89ce9e0bbbdf9f397de81ce1d671db0bb
  [preflight] Running pre-flight checks
    [WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd". Please follow the guide at https://kubernetes.io/docs/setup/cri/
    [WARNING SystemVerification]: this Docker version is not on the list of validated versions: 19.03.2. Latest validated version: 18.09
    [WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'
  [preflight] Reading configuration from the cluster...
  [preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -oyaml'
  [kubelet-start] Downloading configuration for the kubelet from the "kubelet-config-1.15" ConfigMap in the kube-system namespace
  [kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
  [kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
  [kubelet-start] Activating the kubelet service
  [kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...
  
  This node has joined the cluster:
  * Certificate signing request was sent to apiserver and a response was received.
  * The Kubelet was informed of the new secure connection details.
  
  Run 'kubectl get nodes' on the control-plane to see this node join the cluster.
  
  [root@node01 ~]# 
  docker pull gcr.azk8s.cn/google-containers/pause:3.1
  docker tag gcr.azk8s.cn/google-containers/pause:3.1 k8s.gcr.io/pause:3.1
  docker rmi gcr.azk8s.cn/google-containers/pause:3.1
  
  docker pull gcr.azk8s.cn/google-containers/kube-proxy:v1.15.3
  docker tag gcr.azk8s.cn/google-containers/kube-proxy:v1.15.3 k8s.gcr.io/kube-proxy:v1.15.3
  docker rmi gcr.azk8s.cn/google-containers/kube-proxy:v1.15.3
  
  docker pull quay.io/coreos/flannel:v0.11.0-amd64
  

  说明

  [WARNING SystemVerification]: this Docker version is not on the list of validated versions: 19.03.2. Latest validated version: 18.09
  该版本认证的docker 版本为 18.09，当前版本为 19.03.2

部署完成

• 查看结果

  [root@master ~]# kubectl -n kube-system get nodes
  NAME     STATUS   ROLES    AGE     VERSION
  master   Ready    master   3h48m   v1.15.3
  node01   Ready    <none>   49m     v1.15.3
  node02   Ready    <none>   22m     v1.15.3
  [root@master ~]# 

说明

master节点需要的镜像列表

[root@master fb]# docker images
REPOSITORY TAG IMAGE ID CREATED SIZE
k8s.gcr.io/kube-proxy v1.15.3 232b5c793146 3 weeks ago 82.4MB
k8s.gcr.io/kube-apiserver v1.15.3 5eb2d3fc7a44 3 weeks ago 207MB
k8s.gcr.io/kube-controller-manager v1.15.3 e77c31de5547 3 weeks ago 159MB
k8s.gcr.io/kube-scheduler v1.15.3 703f9c69a5d5 3 weeks ago 81.1MB
quay.io/coreos/flannel v0.11.0-amd64 ff281650a721 7 months ago 52.5MB
k8s.gcr.io/coredns 1.3.1 eb516548c180 8 months ago 40.3MB
k8s.gcr.io/etcd 3.3.10 2c4adeb21b4f 9 months ago 258MB
k8s.gcr.io/pause 3.1 da86e6ba6ca1 21 months ago 742kB
[root@master fb]#

node节点需要的镜像列表

[root@node02 home]# docker images
REPOSITORY TAG IMAGE ID CREATED SIZE
k8s.gcr.io/kube-proxy v1.15.3 232b5c793146 3 weeks ago 82.4MB
quay.io/coreos/flannel v0.11.0-amd64 ff281650a721 7 months ago 52.5MB
k8s.gcr.io/pause 3.1 da86e6ba6ca1 21 months ago 742kB
[root@node02 home]#

centos7.2 kubeadm1.15.3部署k8s环境

标签：ror   create   log   linux   detail   warning   cgroup   dep   link   

原文地址：https://www.cnblogs.com/fb010001/p/11516959.html