码迷,mamicode.com
首页 > 其他好文 > 详细

Glusterfs映射成block设备

时间:2019-09-19 01:36:54      阅读:141      评论:0      收藏:0      [点我收藏+]

标签:install   get   sdn   roo   scsi   cat   read   -o   mamicode   

Glusterfs分布式存储软件可以创建集群文件设备,但有时我们需要将文件设备转换为block设备。如下示例为Glusterfs + tcmu,将文件设备转换为block设备。

?

  1. 环境说明:
    ?

    主机名

    IP

    设备

    ?

    ?

    ?

    ?

    存储节点

    oel7db01

    192.168.56.201

    在gluster上创建一个3副本的volume,然后在其中的一个存储节点上挂载这个volume,然后在这个gluster文件系统上创建5个文件,这5个文件后期用来模拟成block设备

    oel7db02

    192.168.56.202

    oel7db03

    192.168.56.203

    计算节点

    oel7db04

    192.168.56.204

    每个计算节点上最终会看到5个block设备,每个block设备来自于3个链路(因为有3个存储节点)

    oel7db05

    192.168.56.205

    ?

  2. 存储节点安装软件:

yum install -y glusterfs-server

yum install -y tcmu-runner

yum install -y tcmu-runner-handler-glfs

安装完成后,存储节点可以看到如下的初始状态:

[root@oel7db01 network-scripts]# targetcli

targetcli shell version 2.1.fb46

Copyright 2011-2013 by Datera, Inc and others.

For help on commands, type ‘help‘.

?

/> ls

o- / ......................................................................................................................... [...]

o- backstores .............................................................................................................. [...]

| o- block .................................................................................................. [Storage Objects: 0]

| o- fileio ................................................................................................. [Storage Objects: 0]

| o- pscsi .................................................................................................. [Storage Objects: 0]

| o- ramdisk ................................................................................................ [Storage Objects: 0]

| o- user:glfs .............................................................................................. [Storage Objects: 0]

| o- user:qcow .............................................................................................. [Storage Objects: 0]

o- iscsi ............................................................................................................ [Targets: 0]

o- loopback ......................................................................................................... [Targets: 0]

/>

?

  1. 存储节点配置

fallocate -l 2G file1.img

fallocate -l 2G file2.img

fallocate -l 2G file3.img

fallocate -l 2G file4.img

fallocate -l 2G file5.img

?

运行targetcli命令进入targetcli中,继续运行如下命令:

/backstores/user:glfs create LUN1 2G gv1@oel7db02/file1.img

/backstores/user:glfs create LUN2 2G gv1@oel7db02/file2.img

/backstores/user:glfs create LUN3 2G gv1@oel7db02/file3.img

/backstores/user:glfs create LUN4 2G gv1@oel7db02/file4.img

/backstores/user:glfs create LUN5 2G gv1@oel7db02/file5.img

?

/iscsi/ create iqn.2016-04.org.gluster:oel7db02

?

从每个客户端获取iscsi的iqn:

more /etc/iscsi/initiatorname.iscsi

?

创建本存储节点到该客户端的iqn连接

/iscsi/iqn.2016-04.org.gluster:oel7db02/tpg1/acls/ create iqn.1988-12.com.oracle:ea8fb3b19c204

/iscsi/iqn.2016-04.org.gluster:oel7db02/tpg1/acls/ create iqn.1988-12.com.oracle:ea8fb3b19c205

?

?

/iscsi/iqn.2016-04.org.gluster:oel7db02/tpg1/luns create /backstores/user:glfs/LUN1

/iscsi/iqn.2016-04.org.gluster:oel7db02/tpg1/luns create /backstores/user:glfs/LUN2

/iscsi/iqn.2016-04.org.gluster:oel7db02/tpg1/luns create /backstores/user:glfs/LUN3

/iscsi/iqn.2016-04.org.gluster:oel7db02/tpg1/luns create /backstores/user:glfs/LUN4

/iscsi/iqn.2016-04.org.gluster:oel7db02/tpg1/luns create /backstores/user:glfs/LUN5

?

saveconfig

?

需要在所有的存储节点上运行以上步骤。

但在/backstores/user:glfs下创建LUN时,指定为当前节点的volume,例如:当前节点为oel7db02,则使用的命令如下(同时需要从第1个存储节点上获取刚刚生成的WWN号):

/backstores/user:glfs create LUN1 2G gv1@oel7db02/file1.img 965b4d0e-fedc-4729-9748-625a397c5f00

/backstores/user:glfs create LUN2 2G gv1@oel7db02/file2.img 69317210-2ea1-4c8b-87b3-98e52b35a788

/backstores/user:glfs create LUN3 2G gv1@oel7db02/file3.img 0f7da034-945b-4da6-9fa3-1c54ae6a8d66

/backstores/user:glfs create LUN4 2G gv1@oel7db02/file4.img d8304b6f-a77e-49cc-8a4e-fa95a34cbd93

/backstores/user:glfs create LUN5 2G gv1@oel7db02/file5.img f0594c4c-8e43-4a30-abf1-e0beb3129e3c

?

最终存储节点配置如下所示:

技术图片

?

4、计算节点配置

iscsiadm -m discovery -t sendtargets -p 192.168.56.201

iscsiadm -m discovery -t sendtargets -p 192.168.56.202

iscsiadm -m discovery -t sendtargets -p 192.168.56.203

iscsiadm -m node -l

?

最终,计算节点能看到所有的盘:

[root@oel7db04 ~]# fdisk -l |grep dev

Disk /dev/sda: 42.9 GB, 42949672960 bytes, 83886080 sectors

/dev/sda1 * 2048 2099199 1048576 83 Linux

/dev/sda2 2099200 83886079 40893440 8e Linux LVM

Disk /dev/mapper/ol_oel7db-root: 37.7 GB, 37706792960 bytes, 73646080 sectors

Disk /dev/mapper/ol_oel7db-swap: 4160 MB, 4160749568 bytes, 8126464 sectors

Disk /dev/sdb: 2147 MB, 2147483648 bytes, 4194304 sectors

Disk /dev/sdc: 2147 MB, 2147483648 bytes, 4194304 sectors

Disk /dev/sdd: 2147 MB, 2147483648 bytes, 4194304 sectors

Disk /dev/sde: 2147 MB, 2147483648 bytes, 4194304 sectors

Disk /dev/sdf: 2147 MB, 2147483648 bytes, 4194304 sectors

Disk /dev/sdg: 2147 MB, 2147483648 bytes, 4194304 sectors

Disk /dev/sdh: 2147 MB, 2147483648 bytes, 4194304 sectors

Disk /dev/sdi: 2147 MB, 2147483648 bytes, 4194304 sectors

Disk /dev/sdj: 2147 MB, 2147483648 bytes, 4194304 sectors

Disk /dev/sdk: 2147 MB, 2147483648 bytes, 4194304 sectors

Disk /dev/sdl: 2147 MB, 2147483648 bytes, 4194304 sectors

Disk /dev/sdm: 2147 MB, 2147483648 bytes, 4194304 sectors

Disk /dev/sdn: 2147 MB, 2147483648 bytes, 4194304 sectors

Disk /dev/sdo: 2147 MB, 2147483648 bytes, 4194304 sectors

Disk /dev/sdp: 2147 MB, 2147483648 bytes, 4194304 sectors

[root@oel7db04 ~]#

?

?

安装multipath:

# yum install -y device-mapper-multipath

?

cat > /etc/multipath.conf <<-EOF

#

# LIO iSCSI

devices {

device {

vendor "LIO-ORG"

path_grouping_policy "multibus"

path_selector "queue-length 0"

path_checker "directio"

prio "const"

rr_weight "uniform"

}

}

?

EOF

?

查看链路:

[root@oel7db04 ~]# multipath -ll

36001405f0594c4c8e434a30abf1e0beb dm-6 LIO-ORG ,TCMU device

size=2.0G features=‘0‘ hwhandler=‘0‘ wp=rw

`-+- policy=‘queue-length 0‘ prio=1 status=active

|- 3:0:0:4 sdf 8:80 active ready running

|- 4:0:0:4 sdk 8:160 active ready running

`- 5:0:0:4 sdp 8:240 active ready running

36001405d8304b6fa77e49cc8a4efa95a dm-5 LIO-ORG ,TCMU device

size=2.0G features=‘0‘ hwhandler=‘0‘ wp=rw

`-+- policy=‘queue-length 0‘ prio=1 status=active

|- 3:0:0:3 sde 8:64 active ready running

|- 4:0:0:3 sdj 8:144 active ready running

`- 5:0:0:3 sdo 8:224 active ready running

360014050f7da034945b4da69fa31c54a dm-4 LIO-ORG ,TCMU device

size=2.0G features=‘0‘ hwhandler=‘0‘ wp=rw

`-+- policy=‘queue-length 0‘ prio=1 status=active

|- 3:0:0:2 sdd 8:48 active ready running

|- 4:0:0:2 sdi 8:128 active ready running

`- 5:0:0:2 sdn 8:208 active ready running

36001405965b4d0efedc47299748625a3 dm-2 LIO-ORG ,TCMU device

size=2.0G features=‘0‘ hwhandler=‘0‘ wp=rw

`-+- policy=‘queue-length 0‘ prio=1 status=active

|- 3:0:0:0 sdb 8:16 active ready running

|- 4:0:0:0 sdg 8:96 active ready running

`- 5:0:0:0 sdl 8:176 active ready running

36001405693172102ea14c8b87b398e52 dm-3 LIO-ORG ,TCMU device

size=2.0G features=‘0‘ hwhandler=‘0‘ wp=rw

`-+- policy=‘queue-length 0‘ prio=1 status=active

|- 3:0:0:1 sdc 8:32 active ready running

|- 4:0:0:1 sdh 8:112 active ready running

`- 5:0:0:1 sdm 8:192 active ready running

[root@oel7db04 ~]#

?

[root@oel7db04 disks]# lsscsi

[1:0:0:0] cd/dvd VBOX CD-ROM 1.0 /dev/sr0

[2:0:0:0] disk ATA VBOX HARDDISK 1.0 /dev/sda

[3:0:0:0] disk LIO-ORG TCMU device 0002 /dev/sdb

[3:0:0:1] disk LIO-ORG TCMU device 0002 /dev/sdc

[3:0:0:2] disk LIO-ORG TCMU device 0002 /dev/sdd

[3:0:0:3] disk LIO-ORG TCMU device 0002 /dev/sde

[3:0:0:4] disk LIO-ORG TCMU device 0002 /dev/sdf

[4:0:0:0] disk LIO-ORG TCMU device 0002 /dev/sdg

[4:0:0:1] disk LIO-ORG TCMU device 0002 /dev/sdh

[4:0:0:2] disk LIO-ORG TCMU device 0002 /dev/sdi

[4:0:0:3] disk LIO-ORG TCMU device 0002 /dev/sdj

[4:0:0:4] disk LIO-ORG TCMU device 0002 /dev/sdk

[5:0:0:0] disk LIO-ORG TCMU device 0002 /dev/sdl

[5:0:0:1] disk LIO-ORG TCMU device 0002 /dev/sdm

[5:0:0:2] disk LIO-ORG TCMU device 0002 /dev/sdn

[5:0:0:3] disk LIO-ORG TCMU device 0002 /dev/sdo

[5:0:0:4] disk LIO-ORG TCMU device 0002 /dev/sdp

[root@oel7db04 disks]#

?

至此,计算节点可以识别到在glusterfs上创建的5个文件设备,已经成功转换为block设备。

后期,只需要将这些block设备通过udev进行绑定即可。

?

?

?

Glusterfs映射成block设备

标签:install   get   sdn   roo   scsi   cat   read   -o   mamicode   

原文地址:https://www.cnblogs.com/missyou-shiyh/p/11546319.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!