|
主机名 |
IP地址 |
|
VIP |
192.168.200.254 |
|
Haproxy-1 |
192.168.200.101 |
|
Haproxy-2 |
192.168.200.102 |
|
Nginx1 |
192.168.200.103 |
|
Nginx2 |
192.168.200.104 |
1、在Nginx1/2上编译安装nginx服务
1.1 首先安装Nginx1
[root@Nginx-1 ~]# yum -y install gcc gcc-c++ make pcre-devel zlib-devel[root@Nginx-1 ~]# useradd -M -s /sbin/nologin nginx[root@Nginx-1 ~]# tar xf nginx-1.6.2.tar.gz -C /usr/src[root@Nginx-1 ~]# cd /usr/src/nginx-1.6.2[root@Nginx-1 nginx-1.6.2]# ./configure --prefix=/usr/local/nginx --user=nginx --group=nginx && make && make install[root@Nginx-1 nginx-1.6.2]# cd /usr/local/nginx/html/[root@Nginx-1 html]# echo "server 192.168.200.103" > index.html[root@Nginx-1 html]# /usr/local/nginx/sbin/nginx [root@Nginx-1 html]# netstat -anpt |grep nginxtcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 4503/nginx |
1.2 安装Nginx2， 同Nginx1搭建方式是一样的。
与Nginx1唯一不同的是：
[root@Nginx-2 html]# echo "server 192.168.200.104" > index.html |
2、安装Haproxy-1与Haproxy-2 两台机器配置一致：
[root@Haproxy-1 ~]# yum -y install gcc gcc-c++ make pcre-devel bzip2-devel[root@Haproxy-1 ~]# tar xf haproxy-1.4.24.tar.gz -C /usr/src/[root@Haproxy-1 ~]# cd /usr/src/haproxy-1.4.24/[root@Haproxy-1 haproxy-1.4.24]# make TARGET=linux26 && make install |
2.1 Haproxy服务器配置
建立haproxy的配置目录及文件
[root@Haproxy-1 haproxy-1.4.24]# mkdir /etc/haproxy[root@Haproxy-1 haproxy-1.4.24]# cp examples/haproxy.cfg /etc/haproxy/ |
2.2 haproxy配置项的介绍
haproxy的配置文件通常分为三部分: global（全局配置部分） defaults（默认配置部分） listen(应用组件部分)
[root@Haproxy-1 ~]# vim /etc/haproxy/haproxy.cfg# this config needs haproxy-1.1.28 or haproxy-1.2.1global log 127.0.0.1 local0 log 127.0.0.1 local1 notice #log loghost local0 info maxconn 4096 #chroot /usr/share/haproxy uid 99 gid 99 daemon #debug #quietdefaults log global mode http option httplog option dontlognull retries 3 #redispatch maxconn 2000 contimeout 5000 clitimeout 50000 srvtimeout 50000listen web-cluster 0.0.0.0:80 option httpchk GET /index.html balance roundrobin server inst1 192.168.200.103:80 check inter 2000 fall 3 server inst2 192.168.200.104:80 check inter 2000 fall 3 |
2.3 创建自启动脚本
[root@Haproxy-1 ~]# cp /usr/src/haproxy-1.4.24/examples/haproxy.init /etc/init.d/haproxy[root@Haproxy-1 ~]# ln -s /usr/local/sbin/haproxy /usr/sbin/haproxy[root@Haproxy-1 ~]# chmod +x /etc/init.d/haproxy [root@Haproxy-1 ~]# /etc/init.d/haproxy startStarting haproxy: [确定] |
2.4 客户端访问测试：
用浏览器打开 http://192.168.200.101 打开一个新的浏览器再次访问 http://192.168.200.101
用浏览器打开 http://192.168.200.102 打开一个新的浏览器再次访问 http://192.168.200.102
可以验证两次访问到的结果分别为：
server 192.168.200.103
server 192.168.200.104
3、编译安装keepalived服务
[root@Haproxy-1 ~]# yum -y install kernel-devel openssl-devel popt-devel[root@Haproxy-1 ~]# tar xf keepalived-1.2.13.tar.gz [root@Haproxy-1 ~]# cd keepalived-1.2.13[root@Haproxy-1 keepalived-1.2.13]# ./configure --prefix=/ --with-kernel-dir=/usr/src/kernels/2.6.18-194.el5-i686 && make && make install |
3.1 配置keepalibed 开机启动脚本
[root@Haproxy-1 ~]# chkconfig --add keepalived[root@Haproxy-1 ~]# chkconfig keepalived on[root@Haproxy-1 ~]# chkconfig --list keepalived |
3.2.1 配置keepalibed 主配置文件
[root@Haproxy-1 ~]# vim /etc/keepalived/keepalived.conf ! Configuration File for keepalivedvrrp_script chk_http_port {script "/etc/keepalived/check_haproxy.sh"interval 2global_defs {router_id LVS_DEVEL}vrrp_instance VI_1 {state MASTER interface eth0virtual_router_id 51 priority 100advert_int 1authentication {auth_type PASSauth_pass 1111}track_script {chk_http_port}virtual_ipaddress {192.168.200.254 }}} |
3.2.2 第二台Haproxy配置keepalibed 主配置文件
[root@Haproxy-2 ~]# cat /etc/keepalived/keepalived.conf ! Configuration File for keepalivedvrrp_script chk_http_port {script "/etc/keepalived/check_haproxy.sh"interval 2weight 2global_defs {router_id LVS_DEVEL}vrrp_instance VI_1 {state BACKUP interface eth0virtual_router_id 51 priority 50advert_int 1authentication {auth_type PASSauth_pass 1111}track_script {chk_http_port}virtual_ipaddress {192.168.200.254 }}} |
4、两台机器上都配置haproxy检测脚本
[root@Haproxy-1 ~]# cat /etc/keepalived/check_haproxy.sh #!/bin/bashnum=`ps -C haproxy --no-header |wc -l`if [ $num -eq 0 ]then /usr/local/haproxy/sbin/haproxy -f /usr/local/haproxy/conf/haproxy.cfg sleep 3 if [ `ps -C haproxy --no-header |wc -l` -eq 0 ] then /etc/init.d/keepalived stop fifi[root@Haproxy-1 ~]# chmod +x /etc/keepalived/check_haproxy.sh[root@Haproxy-1 ~]# service keepalived start[root@Haproxy-2 ~]# service keepalived start |
5.1、测试VIP地址
[root@Haproxy-1 ~]# ip addr show dev eth02: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:cc:18:a2 brd ff:ff:ff:ff:ff:ff inet 192.168.200.101/24 brd 192.168.200.255 scope global eth0 inet 192.168.200.254/32 scope global eth0 inet6 fe80::20c:29ff:fecc:18a2/64 scope link valid_lft forever preferred_lft forever[root@Haproxy-1 ~]# /etc/init.d/keepalived stop停止 keepalived： [确定][root@Haproxy-2 ~]# ip addr show dev eth02: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:fd:8a:4e brd ff:ff:ff:ff:ff:ff inet 192.168.200.102/24 brd 192.168.200.255 scope global eth0 inet 192.168.200.254/32 scope global eth0 inet6 fe80::20c:29ff:fefd:8a4e/64 scope link valid_lft forever preferred_lft forever |
5.2、测试Haproxy健康检查
[root@Haproxy-1 ~]# service haproxy stopShutting down haproxy: [确定][root@Haproxy-1 ~]# service haproxy statushaproxy (pid 59717) 正在运行... |
5.3 网页测试：
用浏览器打开 http://192.168.200.254
再次打开一个新的浏览器再次访问 http://192.168.200.254
可以验证两次访问到的结果分别为：
server 192.168.200.103
server 192.168.200.104
